Jump to content

marsalv

NRG Member
 View Profile  See their activity

  • Posts

    577

  • Joined

  • Last visited

 Content Type 

Everything posted by marsalv

  1. marsalv
    Planking of the boat is done, now remains to complete the interior of the boat.
  2. marsalv
    Thanks to all for comments Works on RC reached 1000 "worked" hours and continues with the production of boat. Form, keel and ribs are done. Now I will continue with planking.
  3. marsalv
    Finally, I placed the cab roof. On the roof I added the sliding cover and two railing each made ​​by a different technique.
  4. marsalv
    Swivel guns are placed on the board, so I decided to finally finish galion.The result does not look bad, although does not reflect reality.
  5. marsalv
    Swivel guns for the deck and the masts.
  6. marsalv
    Tiller and parts for ensign staff fastening are completed and mounted on the hull.
  7. marsalv
    I finished the fish davit and finally began to assemble the finished parts on board, which gradually filled up. Model starting to look good .
  8. marsalv
    Thanks Jan Stropped bocks - I used my serving machine. Method of producing I learned from the Russian (Ukrainian?) modeler.
  9. marsalv
    Thanks to ZyXuz and mtaylor - I'm glad you like it I finished the belfry. I was a little angry at that, but in the end it looks pretty good. The most difficult was the production of the upper arch for me.
  10. marsalv
    And the last two pictures sheet bitts with belaying pins. Belaying pins were a little bigger, so I decided to reduce their length.
  11. marsalv
    Thanks for all your compliments Edwin - the hold down for the drill is part of Micromot drill stand MB 140/S (http://www.proxxon.com/en/micromot/28606.php?list). Today I will post some pictures from sheet bitts production. It was a great challenge for me, what I can make from the wood. The result you can judge for yourself.
  12. marsalv
    Guns and tackles are installed on the deck, shot garlands (?) are completed. I am very happy to have this part of the building successfully behind. It was quite a lengthy and difficult phase of bilding. I think the result is quite good.
  13. marsalv
    Thanks friends for your kind words, they are great motivation for further work on the RC for me. Work continues with the preparation of gun tackles - breechings, side and train tackles. It goes slowly in this size, thank God, there are only 8 guns on RC
  14. marsalv
    Hand pumps are finished. It was quite hard work (at least for me), but I like the result.
  15. marsalv
    Thanks for compliment. Belaying pins - at first I only intended to modify the belaying pins from the kit. Because I will need more of them, I decided to make my own. They are a little bigger, but at the first attempt it is not so bad.
  16. marsalv
    Thanks John, I´m glad you like my work Capsquares are now done, cannons are completed. I did not use guns from the kit, I replaced them with Amati guns.
  17. marsalv
    Gun carriages are completed.
  18. marsalv
    Hi sparow - I have sent you PM with answer. Second part of pictures - brackets.
  19. marsalv
    Thanks to all for nice comments Gun carriages - first part of pictures - axletree, truck and pins for truck fastening (I dont know the correct english word )
  20. marsalv
    Tarbrush - thank you for watching my log Today I wanted to post some photos of my home-made ropewalk and serving machine.
  21. marsalv
    Thanks for the encouraging comments. Proxxon equipment is not cheap, but allows the production of components very efficiently and reproducibly. Here are a few new pictures - window of great cabin.
  22. marsalv
    The rotary table for the mill is very useful accessory - I used it for the next part - the stairs.
  23. marsalv
    Rest of pictures.
  24. marsalv
    Some pictures from capstan production.
  25. marsalv
    I can not find words. Great idea, wonderfull result. I look forward to continuing.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...