Jump to content

Recommended Posts

Posted

I had the exact same issues here and tweaked the frames to fit the plan then remade the top fillers, I just need to sand the pieces to fit. 

 

Current builds;

 Henry Ramey Upcher 1:25 - on hold

 HMS Winchelsea 1764 1:48 

Completed:

HM Cutter Sherbourne- 1:64 - FINISHED   Triton cross section scratch- 1:60 - FINISHED

Providence whaleboat- 1:25 - FINISHED

 

Non ship:  SBD-3 Dauntless 1:48 Hasegawa -FINISHED

 

 

Posted
8 hours ago, Chuck said:

Use a thin wood sheets so they wont flex when you use them as spacers.

 

with those spacers in position and no sills at all,  try tour template again and see how the stern frames look.  If you need to adjust them,   Then you can donso at that time.

Thanks for the advice.  I had cut the frame guides from some 3/64" sheet but couldn't get them to stay in place even with rubber band pressure.  Clearly then 'll have to unglue the ST-CD upright and adjust the slots until things more closely match the framing guide. 

Doug

Current BuildsBluenose II - AKrabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel

On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy

Suspended Build: Bluenose II - Billing Boats Nr 600 

Posted
2 hours ago, Edwardkenway said:

I had the exact same issues here and tweaked the frames to fit the plan then remade the top fillers, I just need to sand the pieces to fit. 

 

Encouraging - thank you!

Doug

Current BuildsBluenose II - AKrabbenkutter / Prince de Neufchatel / Essex Cross-section / Syren / Barque Stefano / Winchelsea / Half Hull / Maria HF31 - Dusek / Bandirma - Turkmodel

On the Shelf: Santisima Trinidad and Cross Section / HMS Cutter Alert / Tender AVOS / Confederacy

Suspended Build: Bluenose II - Billing Boats Nr 600 

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...