druxey Posted February 20, 2013 #61 Posted February 20, 2013 Good to see you and your model back again, Cabrapente! Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
mtaylor Posted February 20, 2013 #62 Posted February 20, 2013 Hi Cabrapente, I too am happy to see your build coming back. Very nice work on her. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
cabrapente Posted February 20, 2013 Author #63 Posted February 20, 2013 I think I've finished the winery. popash42 and klimi 2 Quote
cabrapente Posted February 20, 2013 Author #65 Posted February 20, 2013 I put all the first deck beams. with cans, start the squads. klimi 1 Quote
cabrapente Posted February 20, 2013 Author #66 Posted February 20, 2013 I still have the brackets. I've found a way to use the syringe tail. with a large syringe (for horses), can be sucked directly from the boat tail. is placed a small syringe (being more manageable) at the tip and the tail is transferred. needle, previously, we have started with pliers. in the hole, a pin which fits perfectly serves cap. took several days using it, and does not fail. short deck plankingI put the brackets klimi 1 Quote
cabrapente Posted February 20, 2013 Author #67 Posted February 20, 2013 I begin to lay the deck Quote
cabrapente Posted February 20, 2013 Author #68 Posted February 20, 2013 prepare the strakes of shell, teak, "recycled" an old hammock Quote
cabrapente Posted February 20, 2013 Author #69 Posted February 20, 2013 after several attempts, I get to do a abiton. slots, could do thanks to the advice I gave Cayetano. make a couple of holes and connect them with the blade. "Thanks Cayetano" pulleys I made lemon wood klimi 1 Quote
cabrapente Posted February 20, 2013 Author #71 Posted February 20, 2013 I winch j21896 and klimi 2 Quote
cabrapente Posted February 20, 2013 Author #72 Posted February 20, 2013 short all the second deck beams.and I have the first two brass cannons. begin to manufacture lead Quote
cabrapente Posted February 20, 2013 Author #73 Posted February 20, 2013 for wheel axles of the carriages, use a brass tube, which goes round and give focused my worst fears were fulfilled. when mounting the sleepers, never had clear its exact location. the cover is about three millimeters higher, with respect to the slides. the carriage with the barrel, do not fit. the only thing I can think of, is pressing the carriage axles and lower a bit the support shaft barrel. I hope the best comes next., Quote
cabrapente Posted February 20, 2013 Author #74 Posted February 20, 2013 I start the starboard side shell klimi 1 Quote
cabrapente Posted February 20, 2013 Author #75 Posted February 20, 2013 I put the last of the starboard side strake Quote
cabrapente Posted February 20, 2013 Author #76 Posted February 20, 2013 I'm thinking I uploaded much the bar, choosing boat. I have to repeat things several times. measures had bad sleepers, and ribbons. I have had to change.I have five guns and brass. I will mold silicone, later, as the plaster, degrades much Quote
cabrapente Posted February 20, 2013 Author #77 Posted February 20, 2013 I got chunks of pear, pruning the tree from a friend. no drying. For now, I put in a drawer ... archjofo 1 Quote
cabrapente Posted February 20, 2013 Author #78 Posted February 20, 2013 I have a question. in the plane of the frames, leaving 5 slides on the poop deck. but showing the boat flat finish, only 3. seeing photos from other builders, are the two versions. Is there a reason? Or does every author to your liking? Thank you. cabrapente Quote
cabrapente Posted February 20, 2013 Author #79 Posted February 20, 2013 I have a question. in the plane of the frames, leaving 5 slides on the poop deck. but showing the boat flat finish, only 3. seeing photos from other builders, are the two versions. Is there a reason? Or does every author to your liking? Thank you. cabrapente Quote
cabrapente Posted February 20, 2013 Author #80 Posted February 20, 2013 Details of the arches. pulleys Quote
cabrapente Posted February 20, 2013 Author #82 Posted February 20, 2013 the port side, in the center, he was 3 mm lower on one side. were not parallel, so I've got a wedge to level Quote
cabrapente Posted February 20, 2013 Author #83 Posted February 20, 2013 I made two precision screwdrivers gouges. I got curved moldings. The tool, put it in a ribbon that serves as compass Quote
cabrapente Posted February 20, 2013 Author #84 Posted February 20, 2013 I made a drawer and placed between the vacuum suction tube. collects all garbage, without losing strength and no mess cleaner. heh heh heh Quote
cabrapente Posted February 20, 2013 Author #85 Posted February 20, 2013 I start with windows. brackets Quote
cabrapente Posted February 20, 2013 Author #89 Posted February 20, 2013 with an "octopus", grab the boat to a chair and I can work comfortably in the stern popash42 1 Quote
cabrapente Posted February 20, 2013 Author #90 Posted February 20, 2013 more cristikc and popash42 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.