Jump to content

Recommended Posts

Posted

Watching an antiques program on TV this item was described as having been salvaged from the wreck of HMS Invincible. (Captured from the French Navy 1747 and sunk 1758)

The item was described as a "pulley".   I would expect a pulley to have been fitted with a rolling sheave but this item appears as a flat circular piece of wood with just a round hole at its centre ~~~  so, for what would it have been used, and HOW would it have been used?

 

20201124_123559.thumb.jpg.7e57d708f1e24df49ce6428498e94538.jpg

 

Jim.

 

I cut it twice . . . . . and it's still too short!

 

 

HMS Leopard 1790; scratch build 1:80 PoB

Cross Section - HMS Leopard 1790 - 1:44         

        

 

Posted

Bruce,  it was on today's edition of "Bargain Hunt".   

He didn't actually say it had been under water for over 200 years but he did say something like 'it was his prized possession from the wreck of HMS Invincible', so I assumed that it had been salvaged after having been 'down there' for some time.

The site of the wreck was discovered in 1979.

Jim.

 

I cut it twice . . . . . and it's still too short!

 

 

HMS Leopard 1790; scratch build 1:80 PoB

Cross Section - HMS Leopard 1790 - 1:44         

        

 

Posted

To make sense of the above, I asked a question and then deleted the post as I found the answer myself.

Thanks Jim, afraid I can't answer the original question.

 

Regards,

Bruce

🌻

STAY SAFE

 

A model shipwright and an amateur historian are heads & tails of the same coin

current builds:

HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style

Mediator sloop, 1/48 - an 18th century transport scratchbuild 

French longboat - CAF - 1/48, on hold

Posted
1 hour ago, Bluto 1790 said:

 I would expect a pulley to have been fitted with a rolling sheave but this item appears as a flat circular piece of wood with just a round hole at its centre

 The lack of any finishing or beveling of the wood, makes me wonder if it was something contrived by a previous owner, i.e., someone replaced a missing deadeye with a piece of wood.

“Indecision may or may not be my problem.”
― Jimmy Buffett

Current builds:    Rattlesnake

On Hold:  HMS Resolution ( AKA Ferrett )

In the Gallery: Yacht Mary,  Gretel, French Cannon

Posted

Or that the found object - in fact, a pulley or sheave - has been 'decorated' with line. The condition of the line (and in particular, the worming) does not look as old as the sheave!

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Posted

Thanks Bruce, Gregory and Druxey for your comments.

 

In view of your comments and having looked at the 'item' again, I feel I have to believe the wooden part was in fact the sheave out of a block and that someone has indeed 'decorated' it with some 'old rope'.  In its present appearance I can't imagine it would have any practical use ~~~  and that's why I asked the question . . . as I couldn't imagine how it would be used!

Jim.

 

I cut it twice . . . . . and it's still too short!

 

 

HMS Leopard 1790; scratch build 1:80 PoB

Cross Section - HMS Leopard 1790 - 1:44         

        

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...