Tactical Foredeck Posted January 4, 2021 Share #1 Posted January 4, 2021 First time model builder here. Technically I've built some gundam models in the past but I don't really count those in the same category as what I'm beginning on here. I'm an avid sailboat racer and for my birthday I was gifted a J/24 made by BlueJacket. I sail on J/22s much more often but think the J/24 is still a fine looking boat and will be excited to have this on my self once it's complete. Opening the box was a little intimidating but after reading through the instructions most of it seems to be shaping the wood which doesn't worry me then rigging it like an actual sailboat which I have a lot of experience with. The one part that I'm a little worried about is the painting but figured I could put that off till the end (turns out I was wrong about this). After getting things organized on my table I started in with getting the included stand set up by sanding off the laser cut burnt edges which was much messier than I thought it would be (probably need to go back and stain this to give it a nice finished look). The next step was working on getting the cockpit area fleshed out, I didn't make it far as the parts need to be primed before assembly since they would be hard to access after the fact. Here was where I had to stop for the day as I don't have any paint brushes and don't fully understand how to use all the paints provided with the kit. Guess I'm going to be researching how to paint and running to the hobby store tomorrow before anything else gets done. Overall an enthusiastic but not super productive start to the model. gsdpic, yvesvidal, bhermann and 1 other 4 Quote Link to comment Share on other sites More sharing options...
ZackP Posted January 4, 2021 Share #2 Posted January 4, 2021 (edited) I was eyeing this same model, maybe it will be next. I race J/30s, along side a couple of J/22s, and last year a J/24 joined the PHRF fleet. All the one-design owners follow the class rules (as closely as beer league allows), and therefore are rated the same. We end up with several mini-one-design fleets in the middle of the larger mixed fleets. Really fun boats. Looking forward to seeing the build progress! Edited January 4, 2021 by ZackP a word Quote Link to comment Share on other sites More sharing options...
wemattson Posted January 5, 2021 Share #3 Posted January 5, 2021 J/24s are great sailboats. It was the first boat I started racing on years ago and we had a large fleet here when I was growing up. There's still quite few in the harbor and are still active. I've seen this on the Bluejacket website and I'm glad that someone here is building one. I'll be following along. mtaylor 1 Quote Current Projects: Kate Cory - Model Shipways - 1:64 Link to comment Share on other sites More sharing options...
Tactical Foredeck Posted January 10, 2021 Author Share #4 Posted January 10, 2021 (edited) Weekend update: Slowly been working on the model this week which mostly involved me trying to figure out how to do things and not much actually progressing. Basically this week I finished shaping the hull and got a coat of primer over the whole thing. I ran into lots of little problems and questions over the week which in retrospect seem pretty easy but having never built a model like this before I had no idea where to start. Just little things like the best way to use the hull templates for getting it into the proper shape or how to mark the center line of the hull or what kind of paint thinner will actually clean my brush seem super easy now but caused some serious delay getting into it. The hull blank that comes with this kit is pretty close to the final shape but requires some trimming and shaping to get into paint ready condition. Starting out I was trying to get the hull to exactly fit the templates provided which was taking a lot of time (and effort as I didn't really know how to do it) and I eventually gave up a little as I realized having a 100% to scale hull shape was probably not going to be the most important thing in the end. My only big mistake during this process was I trimmed the transom a little too short and had to figure out how to shim/wood putty it back into the right length, pretty happy with the results as it's pretty hard to tell I made a mistake. I'm also finding out the lack of a dedicated workshop for this is a little bit of an issue as I have sanding dust everywhere right now even with my frequent vacuuming, just a price I have to pay I guess. I've got one more run into the hobby store for some kind of saw for cutting the thin aluminum tubes this kit uses because I found out using little wire cutters pinches the tube closed and kind of ruins the effect. Edited January 10, 2021 by Tactical Foredeck Rach10199, yvesvidal and gsdpic 3 Quote Link to comment Share on other sites More sharing options...
Tactical Foredeck Posted January 10, 2021 Author Share #5 Posted January 10, 2021 As for actual sailing - My club has a bunch of one design fleets which the j/22s and j/24s race in (we could also join the PHRF fleet if we really wanted but why do that when there's one design). Last year was a little different due to covid but during our weeknight races all the fleets are raced at the same time with ~3min between each start so you might only be racing the 15-20 boats in your fleet but there are 100+ boats out on the water. It's a ton of fun. Like I said I'm usually racing a j/22 (or Laser on Dinghy night) but try to jump around to different boats just to get some variety into my sailing. Quote Link to comment Share on other sites More sharing options...
Rach10199 Posted January 10, 2021 Share #6 Posted January 10, 2021 12 minutes ago, Tactical Foredeck said: Weekend update: Slowly been working on the model this week which mostly involved me trying to figure out how to do things and not much actually progressing. Basically this week I finished shaping the hull and got a coat of primer over the whole thing. I ran into lots of little problems and questions over the week which in retrospect seem pretty easy but having never built a model like this before I had no idea where to start. Just little things like the best way to use the hull templates for getting it into the proper shape or how to mark the center line of the hull or what kind of paint thinner will actually clean my brush seem super easy now but caused some serious delay getting into it. The hull blank that comes with this kit is pretty close to the final shape but requires some trimming and shaping to get into paint ready condition. Starting out I was trying to get the hull to exactly fit the templates provided which was taking a lot of time (and effort as I didn't really know how to do it) and I eventually gave up a little as I realized having a 100% to scale hull shape was probably not going to be the most important thing in the end. My only big mistake during this process was I trimmed the transom a little too short and had to figure out how to shim/wood putty it back into the right length, pretty happy with the results as it's pretty hard to tell I made a mistake. I'm also finding out the lack of a dedicated workshop for this is a little bit of an issue as I have sanding dust everywhere right now even with my frequent vacuuming, just a price I have to pay I guess. I've got one more run into the hobby store for some kind of saw for cutting the thin aluminum tubes this kit uses because I found out using little wire cutters pinches the tube closed and kind of ruins the effect. On my first build (a schooner) sanding the correct shape was the most difficult part for me. This looks great in my novice opinion 👍 I look forward to watching your rigging process. Quote ~ Rachel Link to comment Share on other sites More sharing options...
Tactical Foredeck Posted January 15, 2021 Author Share #7 Posted January 15, 2021 (edited) She's painted and looking pretty nice. Was a little worried about how this would turn out as I don't have a lot of painting experience and while the results are far from perfect they are good enough for who it's for :D. After getting the whole hull covered in primer the I sanded the primer smooth working all the way up to 1500 grit for that glossy fiberglass type feeling. I had originally planned to do two coats of primer but after sanding the first coat things were feeling smooth so the only place I did a second coat was in the cockpit and keel as these two were different pieces of wood and the grain will still showing through. Before painting there were a few more touches to the hull that had to be made, mainly adding the mast base and companion way top. The hull comes pre-drilled with a spot for the mast but I discovered that the airfoil shaped mast wouldn't fit in the round hole. Luckily there is a mast base that covers part of the hole, I did some modifications to enlarge the hole so that the mast fit before gluing the mast base on to hide my work. My other issue I ran into was fitting the companion way as this was a flat part and the deck is very rounded. I was able to make things work by sanding a slight hollow in the bottom of the piece and then bending it a little for the final fit. After a hastily constructed paint booth was made for my shower painting began and went fairly smooth. I think I sanded the primer a little too smooth as the first layer of white didn't want to stick very well but the second coat covered pretty nicely. I had a little struggle with taping off the waterline for the red portion of the hull and just ended up going off of how it looked more than any measurement so it's not perfect under close inspection but looks pretty nice otherwise. I also had a few spots where the tape peeled away between the first and second coats which caused a little bleeding so I might have to get a bottle of white paint to touch up those areas. At this point the paint is still a little soft, I'm hoping if I let it rest a little longer it will firm up a bit. The kit also came with a gloss coat that I'm assuming I should paint on there over top but right now the finish is already nice and shiny so I don't know how necessary this is. Any suggestions here would be helpful. Edited January 15, 2021 by Tactical Foredeck Tom E, wemattson and ccoyle 3 Quote Link to comment Share on other sites More sharing options...
MrBlueJacket Posted January 18, 2021 Share #8 Posted January 18, 2021 Looking good! For white paint touch-up you can just spray a little white onto a piece of wax paper and then paint with it. The gloss paint is for the bare wood, like the tiller, mahogany and stand. Nic Quote Link to comment Share on other sites More sharing options...
JvdS Posted December 3, 2023 Share #9 Posted December 3, 2023 Hi, Im trying to build a J24 half hull model as a trophy for the Dutch competition. Can anyone provide some drawings or templates to shape the hull? Quote Link to comment Share on other sites More sharing options...
MrBlueJacket Posted December 3, 2023 Share #10 Posted December 3, 2023 Yes, you can buy a carved hull, and the plans page with the templates. Call us up. 207-548-9970 Nic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.