Don Case Posted July 9, 2021 #1 Posted July 9, 2021 (edited) When you are gluing down deck planking do you put glue on every beam, carling and ledge that the plank crosses or just the minimum to hold it in place? Edited July 9, 2021 by Don Case mtaylor 1 Quote HMS Discovery 1789 by Don Case - 1:48 - - Build logs for subjects built 1751 - 1800 - Model Ship World™
Jim Rogers Posted July 9, 2021 #2 Posted July 9, 2021 Personally I put glue on every surface the plank touches. Jaager and mtaylor 2 Quote Regards, Jim Rogers Damn the Torpedoes , Full speed ahead. Adm David Farragut.
mtaylor Posted July 9, 2021 #3 Posted July 9, 2021 I too do what Jim does. Just seems more secure to me. Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Phil Babb Posted August 15, 2021 #4 Posted August 15, 2021 I use a d4 type glue and apply to both surfaces, on all touching areas, this then gives a superb adhesion mtaylor 1 Quote
Eurus Posted August 15, 2021 #5 Posted August 15, 2021 Both surfaces, and all areas. Apply it and then wait 10 minutes--or whatever the manufacturer recommends--and then press firmly together. After finishing, run the handle of a wooden tool pressing down on the planks to smooth them. mtaylor 1 Quote Eurus My logs: Providence Whaleboat ARM Cuauhtémoc
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.