Jump to content

Chain Plates Gor 16th Century Spanish Galleons


Go to solution Solved by allanyed,

Recommended Posts

I am building the San Marcos kit (1585) and have come to the section when its time to start the chain plates. Can anyone tell me what type of chain plates were used on 16th century Galleons? The chain plates it comes with were really for an 17th century galleon.

Link to comment
Share on other sites

  • Solution

Have you watched the videos of the ten year San Salvador project?   There may be some clues there as they did a ton of research before building the replica.  I have no idea how accurate they have been but the old video here is quite interesting.

There are lots of photos of this ship on the net since she was launched that show the chain plates which look like those of the 17th century.

 

Also, there are photos of a 16th century galleon at the RMG Collections site.  The model is modern (1988) but based on contemporary information.  Note that one of the builders of the model was noted author James Lees.   The description of the model is as follows:

 

Scale: 1:96. A full hull model of a Spanish galleon (circa 1588). Built in the solid and plank on frame. Model is decked, equipped and fully rigged, including details such as a pair of anchors, deck gratings, flags, decoration around the stern and bulwarks, and a number of scale figures in the rigging and on deck. This model and the English equivalent (SLR0358) have been built from a design by David White, formerly of the NMM, based upon contemporary evidence and known naval architectural design. By comparison, the Spanish ships were much higher and rounded in the midship section. Spain did not possess a permanent force of sailing warships in the Atlantic before the 1570s. Twelve royal galleons built between 1568 and 1570 were deemed to small for fighting ships, and the three building programmes between 1578 and 1591 aimed to produce large ships that could carry a great deal of sail, many guns and would be able to overcome their opponents. This model represents one of the new, large galleons of the Armada period.

 

You can get high resolution photos  from RMG.

 

Allan  

1467887168_SpanishGalleonNMM.jpg.a5177a1d0f40488991e75f8bd87f51f0.jpg

2097784366_SpanishgalleonNMM2.thumb.jpg.5f4aa8dc65e8ab3e5627163af7552000.jpg

674625863_SpanishgalleonNMM3.thumb.jpg.a3a493ae520d0d5333cc1eafdaa3c507.jpg

Edited by allanyed

PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series.   Click on http://trafalgar.tv   There is no cost other than the 30 seconds of your time.  THANK YOU

 

Link to comment
Share on other sites

  • 3 weeks later...

Thanks, Allan. I think there's a lot to learn from contemporary representations, and I thought it would be good to collect as many as possible in one place as an easily-accessed reference.

 

Bill, just a quick question - when you ask about chain plates, do you mean metal plates or the flat wooden extensions to the hull which hold the shrouds, known as chain wales (channels)?

 

Steven

 

 

Link to comment
Share on other sites

  • 3 weeks later...

Sorry to hear you've been sick, Bill.

 

I hope the pictures on the pinterest page are helpful to you. Unfortunately the archaeological record is fairly sparse, and a lot of the technical information we need is only available from contemporary pictures, which often incorporate a fair bit of artistic licence. Matthew Baker's pictures are perhaps the most reliable for this period. It's a pity there are so few of them.

 

Best wishes,

 

Steven

Link to comment
Share on other sites

  • 2 months later...

That's great news, Bill.   Welcome back home.

Mark
"The shipwright is slow, but the wood is patient." - me

Current Build:                                                                                             
Past Builds:
 La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD           Triton Cross-Section   

 NRG Hallf Hull Planking Kit                                                                            HMS Sphinx 1775 - Vanguard Models - 1:64               

 

Non-Ship Model:                                                                                         On hold, maybe forever:           

CH-53 Sikorsky - 1:48 - Revell - Completed                                                   Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)         

         

                                                                                                                                                                                                                                                                                                

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...