SaltyDog Posted January 13 #1 Posted January 13 Hello I've been lurking on this website for a couple of years and building ship models to various levels of completion but thought it was actually time to build something to completion and post it on this website. The frame and bulkheads went together nicely and I am putting on my first layer of planking. I did some rabbet work and a bearding line down by the keel, stem, and post rather than following the kit instructions to the letter. CTDavies, KARAVOKIRIS, Mr Whippy and 1 other 4 Quote
SaltyDog Posted February 6 Author #2 Posted February 6 I finished the 1st layer of planking and then sanded the hull. I applied some wood filler and sanded it again. The instructions tell you to plank the bottom of the stern with walnut before starting the 2nd layer of planking. KARAVOKIRIS and Mr Whippy 2 Quote
SaltyDog Posted February 13 Author #3 Posted February 13 Progress continues. 2nd planking commences. Then the wale was installed. Heinrich der Seefahrer, ccoyle and Mr Whippy 2 1 Quote
Thunder Posted March 19 #5 Posted March 19 This is a delightful little model that does not get the attention it deserves. I built this and was one of the most enjoyable builds i have completed. Hope you enjoy as much as i did. Quote Current Build(s): H.M.S Diana 1794 - Caldercraft 1:64 Scale Completed Builds: H.M.S. Cruiser 1797 - Caldercraft 1:64 Scale H.M. Naval Cutter Speedy 1828 - Model Shipwright 1:48 Royal Caroline 1749 - Panart 1:47 H.M. Brig Supply 1759 - Caldercraft 1:64 H.M.S. Pickle 1778 - Caldercraft 1:64 H.M.Y. Chatham 1741 - Caldercraft 1:64 H.M.S. Resolution Cutter - Corel 1:50 H.M.S. Racehorse - Sergal 1:47 (Renamed H.M.S. Thunder 1740) first wooden kit build.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.