Erik W Posted July 11, 2015 Share #181 Posted July 11, 2015 It looks like the Essex kit is currently out of stock and back ordered at Model Shipways. I would assume then that anyone purchasing this kit directly from them from now on will receive the kits with the latest corrections/upgrades. It's a shame the execution of this kit didn't match what was designed. Erik Quote Current build: HM Cutter Cheerful - Scratch Build - 1:48Finished build: 18th Century Longboat - Model Shipways - 1:48 Link to comment Share on other sites More sharing options...
Jaxboat Posted July 12, 2015 Share #182 Posted July 12, 2015 Hi Stefan, Check the date for the parts list. If it is recent, then the kit is the new version. The same holds true for the Instructions print date. The ship's plans were not updated to the best on my knowledge. Be aware that the laser cut parts were improved substantially and now fit but the metal castings remain awful. Best Jaxboat Quote Link to comment Share on other sites More sharing options...
standard2k Posted July 13, 2015 Share #183 Posted July 13, 2015 (edited) Hi, thanks for the Answers. But the Problem is, as i said my Post before, that i'm not able to look inside the Kit. The German Importer Krick has only one Essex left and did not order reglulary at Model Expo, only one or two Times a year or on exclusive Order. So if i order, i would buy a pig in a poke. If i got luck and it's a new One everything is ok, but if it's an old one the Problem sending the replacement parts to Germany is open. therefore i would buy the Confederacy, it's actually also exclusive Order( delivery Time up to 6 month ), but then i hope that there are no problems with the parts because the Confed did not have such problems. Greetings Steffen Edited July 13, 2015 by standard2k Quote Link to comment Share on other sites More sharing options...
Jaxboat Posted July 13, 2015 Share #184 Posted July 13, 2015 The Confederacy is a much better bet. It is a beautiful kit. It still suffer from terrible castings like the Essex which is no fault of the designers. Chuck Passaro's company (Syren) sells a resin cast figure head and beautiful cannon replacements. Enjoy Best Jaxboat Quote Link to comment Share on other sites More sharing options...
Blackheath9 Posted July 14, 2015 Share #185 Posted July 14, 2015 I'm looking for some advice today. I'm making good progress on Essex, and will be ready to start the copper sheathing in a few weeks. This will be my first attempt at sheathing, and am at a loss as to the best adhesive to use to apply the copper tiles. Could anyone give me some suggestions? Stu Quote Link to comment Share on other sites More sharing options...
Thistle17 Posted July 18, 2015 Share #186 Posted July 18, 2015 I had ordered a ME kit of the Essex in October of 2014 and it arrived in early 2015. In reading this thread I have become a bit confused regarding the release and shipment date of the "revised kit". I am not sure of what I have at this point. Also I think I saw some where in this thread on this site regarding a time stamp on the kit or drawings. Did I imagine this? Thanks Quote Link to comment Share on other sites More sharing options...
Mercdaddy27 Posted July 20, 2015 Share #187 Posted July 20, 2015 (edited) I received my ESSEX kit from ME last month(See previous posts this topic), and the parts list had a date of 5/21/2015. To my knowledge, ME did not update the drawings nor the packaging. My box had a 2013 date on it. Hope this helps. Mercdaddy Past Builds: Corel"s Victory, Mamoli's Friesland, Mantua's San Felipe, Model Shipway's USS Constitution Current Build: Model Shipway's USS Syren Future Build: Model Shipway's USF ESSEX Edited July 20, 2015 by Mercdaddy27 Quote Link to comment Share on other sites More sharing options...
Thistle17 Posted July 22, 2015 Share #188 Posted July 22, 2015 Do you suppose Mercdaddy27 we could compare kit contents in a controlled fashion so as not to contaminate yours? I am a resident of Webster NY and a member of NRG. Quote Link to comment Share on other sites More sharing options...
Mercdaddy27 Posted July 24, 2015 Share #189 Posted July 24, 2015 I would certainly be open to meet and discuss this kit since I'm probably 20 -30 minutes from you. As far as doing a item by item comparison, I believe that is unnecessary since the updates have been well document in this thread. Mercdaddy Past builds: Core's Victory, Mamoli's Friesland, Mantua's San Felipe, Model Shipways, USS Constitution Current Build: Model Shipway's USS Syren Future Build: Model Shipway's USF ESSEX Quote Link to comment Share on other sites More sharing options...
overdale Posted August 3, 2015 Share #190 Posted August 3, 2015 For those building the Essex, here is an attractive 1/48 version I found online with some interesting color options. I particularly like the the black gunport lids. Anyone know if that could be considered accurate.? CharlieZardoz, uss frolick, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.