Jump to content
Moxis

Any model steam engine builders here?

Recommended Posts

When starting my new project, a steamship from the beginning of 20th century, I have thought hard to build a steam engine to power the model. My preferred engine would be a two cylinder compound engine, which would be the same type as used in the original ship. There are a few possible engines offered at Internet, both ready machined and sets of castings. It seems that prices for ready made engines are beyond my possibilities, but sets of castings are more reasonably priced. But how difficult it is for a beginner to machine a steam engine? How accurately you must work to get pistons and cylinders work together, to fabricate crankshaft, bearings, steam valves etc. or should I just forget these wild dreams and use electric power instead?

Edited by Moxis
mtaylor and thibaultron like this

Share this post


Link to post
Share on other sites

Moxis.

 

The difficulty really depends on the type of machinery you have available and what experience you have of using it. Do you have access to a metal working lathe and milling machine and the tooling that goes with them?

 

Rather than go straight to the expense and complexity of a kit compound engine I would suggest you try something simpler like a wobbler first to build up your skills. You can find designs on the web.

 

Alternatively you can try something a bit more complex like a "paddle duck". Good designs and build instructions are also available on the internet.

mtaylor and thibaultron like this

Share this post


Link to post
Share on other sites

Thanks Keith. This paddle duck might be a very interesting model to start with. Yes I have a metal lathe and milling machine, together with the tooling for them. And also a little bit experience to use them, but so far I have never made anything which needs tight tolerances and accuracy within 1/100 millimeter.

thibaultron and mtaylor like this

Share this post


Link to post
Share on other sites

Moxis - I dont think you need to be as good as 1/100 mm. Half that is fine 1/1000 inch in my way of working. Bores can be finished with a reamer which easily gives this accuracy. Here is one I did earlier:-

 

DSC05213.thumb.JPG.7649e11a24f39717f6c87aeacdf95abc.JPGDSC05214.thumb.JPG.dbeaae8af65ae71eb92f97f0b15f3aa3.JPG

 

 

mtaylor, KingDavid, Mike Y and 1 other like this

Share this post


Link to post
Share on other sites

Moxis

 

It makes up into quite a nice and interesting model. The pistons are double acting which mean it self starts. The valve  allows the steam and exhaust ports to be reversed which means the engine can be reversed. The valve also allows the engine speed to be adjusted between dead slow and very fast. Have fun - a build log would be good as I am sure you will get a lot of interest.

mtaylor, Canute and thibaultron like this

Share this post


Link to post
Share on other sites

Look on YouTube for "Keith Appleton" he makes wonderful videos about building small steam engines many play lists and a great sense of Yorkshire humor 

and has built many steam launches etc well worth many hours of viewing on cold damp winter evenings 

Andy

jud, thibaultron, mtaylor and 2 others like this

Share this post


Link to post
Share on other sites

I don't think there are too many people on this forum with an interest in the subject and the skills and experience to go with it.

 

(Steam) model engine builders are mostly found on fora such as the one that is run by the traditional magazine 'The Model Engineer': http://www.model-engineer.co.uk/forums/

 

There are also many good tutorial and reference books on the market. An on-line booksellers that I used in the past and that has virtually everything that is on the market is: https://www.camdenmin.co.uk/

Edited by wefalck
mtaylor likes this

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×