Ray

Progress has been a bit slow mainly due to having a bout of flu which laid  me up for over two weeks.
The first photos show the tac toggles some start at a block and some go through a rope loop. The next part of the rigging was to add the leechlines and the buntlines to the fore & main yards and the crossjack,I then added the cluelines and sheets to all three masts,I am not adding  the tac sheets for the moment to give access, the next decision, is wether to add the braces before the gaffs and the spritsail yard are fitted as some braces are rigged to the gaffs its is still a mater of turning space.
 
Tac toggle in the making

Toggle through rope loop

Toggle through a block

Fore main yard


Main yard


Main & Mizzen

Mizzen



 

The next boat to be completed is the 26ft launch built as the other two plus some photos of all three only the pinace to do now as before the early stages done but on holiday for two weeks from Sunday so they should all be completed by the end of the month.
Keel & frames

1st planking

2nd planking


false keel

inside ribs

decks added

seats

row locks & winch

tiller

painted

tiller added

inside fitted out

completed 


tiller inboard

three finished boats



 
 
 

The next boat to be completed is the 26ft launch built as the other two plus some photos of all three only the pinace to do now as before the early stages done but on holiday for two weeks from Sunday so they should all be completed by the end of the month.
Keel & frames

1st planking

2nd planking


false keel

inside ribs

decks added

seats

row locks & winch

tiller

painted

tiller added

inside fitted out

completed 


tiller inboard

three finished boats



 
 
 

Ships boats
I decided the next job was to build the four ships' boats,I started with the smallest one, the 18ft cutter, this was to be my first real build of a ships boat, as the ships boats on Pegasus were hulls I fitted out. Again the kit drawings are a bit basic, so using the boat kit as a starting point, I built the boats adding detail from The Anatomy of ship Diana s  drawings, off the ships boats and will hopefully, using the experience gained on the first one built, be able to build, the others even more closely to the books boats. ( below is a photo of the the kit plan for the 24ft cutter and the plan from the book)
The cutter hull build went OK double planked with some 4mm x .5mm timber I already had, I made sure to overlap the joints of the first planking with the second planking to add strength (after a little bit of filler to the the first planking), the frame tabs were then broken off and the hull sanded inside and out with only a tiny amount of filling required, I then planked the bottom inside, the A O S Diana shows fore and aft gratings, so some wooded packs, and a plastic moulded one were ordered, they were both way too thick, so I cut the shape for the aft one from the plastic grating, and then reduced its thickness, and it looks fairly good,next the internal frames were added using plastic strip and painted yellow ochre, and the the seats added, the wash strake next, again from plastic, and the row-locks were then filed out. The tiller was again made from plastic sheet with the hinges added and lastly the tiller arm, the outer hull was then painted, on the 18ft cutter a green band waqs painted, and the rest of the hull satin white. Lastly the anchor, boat hooks, ropes and oars were added for effect, overall I am pleased with this cutter and hope to improve my small boat building on the other three, and I have made a start on the next boat whilst waiting for coats of paint to dry on this one.
Kit plan and the plan in A N O S Diana ( these are the 22ft cutter)


first planking

2nd planking

keel added

grating

wash strake thwarts & grating


Painting


tiller

Completed no fittings


Completed cutter fitted out




 
 
 
 
 

Gaff & Booms
Time to add the Spanker boom and the Gaff boom,again the supplied rigging drawings are sketchy and difficult to follow,so I decided to rig the booms as per L Petersons R P S M which is my rigging bible I highly recommend this book which can be  purchased for around £25.The booms are now both rigged and the last of the braces which rig into the booms have also been added. One thing that will to be attended to is re-tensioning some of the rigging, but I will do this when the rigging is completed,the only rigging remaining are the tac sheets,and then just the dummy rope coils and a few odds and ends.
Next job ships boats or the stand.





Diana as she is now starting to look the real deal



 

Braces
The braces were rigged next the fore main braces were rigged as per Pegasus and R P S M which runs through blocks fixed the the rear of the top not blocks around the lower mast. The rest of the braces other than those from the mizzen rigged to the gaff have also been added.







 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats
I decided the next job was to build the four ships' boats,I started with the smallest one, the 18ft cutter, this was to be my first real build of a ships boat, as the ships boats on Pegasus were hulls I fitted out. Again the kit drawings are a bit basic, so using the boat kit as a starting point, I built the boats adding detail from The Anatomy of ship Diana s  drawings, off the ships boats and will hopefully, using the experience gained on the first one built, be able to build, the others even more closely to the books boats. ( below is a photo of the the kit plan for the 24ft cutter and the plan from the book)
The cutter hull build went OK double planked with some 4mm x .5mm timber I already had, I made sure to overlap the joints of the first planking with the second planking to add strength (after a little bit of filler to the the first planking), the frame tabs were then broken off and the hull sanded inside and out with only a tiny amount of filling required, I then planked the bottom inside, the A O S Diana shows fore and aft gratings, so some wooded packs, and a plastic moulded one were ordered, they were both way too thick, so I cut the shape for the aft one from the plastic grating, and then reduced its thickness, and it looks fairly good,next the internal frames were added using plastic strip and painted yellow ochre, and the the seats added, the wash strake next, again from plastic, and the row-locks were then filed out. The tiller was again made from plastic sheet with the hinges added and lastly the tiller arm, the outer hull was then painted, on the 18ft cutter a green band waqs painted, and the rest of the hull satin white. Lastly the anchor, boat hooks, ropes and oars were added for effect, overall I am pleased with this cutter and hope to improve my small boat building on the other three, and I have made a start on the next boat whilst waiting for coats of paint to dry on this one.
Kit plan and the plan in A N O S Diana ( these are the 22ft cutter)


first planking

2nd planking

keel added

grating

wash strake thwarts & grating


Painting


tiller

Completed no fittings


Completed cutter fitted out




 
 
 
 
 

Gaff & Booms
Time to add the Spanker boom and the Gaff boom,again the supplied rigging drawings are sketchy and difficult to follow,so I decided to rig the booms as per L Petersons R P S M which is my rigging bible I highly recommend this book which can be  purchased for around £25.The booms are now both rigged and the last of the braces which rig into the booms have also been added. One thing that will to be attended to is re-tensioning some of the rigging, but I will do this when the rigging is completed,the only rigging remaining are the tac sheets,and then just the dummy rope coils and a few odds and ends.
Next job ships boats or the stand.





Diana as she is now starting to look the real deal



 

Braces
The braces were rigged next the fore main braces were rigged as per Pegasus and R P S M which runs through blocks fixed the the rear of the top not blocks around the lower mast. The rest of the braces other than those from the mizzen rigged to the gaff have also been added.







 

Lower stun sail booms
One other outstanding job was to make and add the lower stun sail booms, the plans and instructions are rather sketchy on these, so a look at the box photos sorted out the main mast ones,but it does not show them fitted to the fore mast but they must have been fitted and a look in R P S M shows them hooked into the hull,the kit supplies enough brackets for four booms so I just lined up the fore mast ones with the yard, and added them the same as the main mast one.

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Hi guys thanks for the coments and ticks.
 
Nils the other boats in the shipyard are a 24ft cutter which is nearly finished (photos soon), a 26ft launch and a 32ft pinace.
 
Mort the gratings are Amiti A4328 100x40mm hole size 1.5 mm to my mind they look very good at this scale as mentioned in the log they are too thick but with care can be thined down. I obtained mine from Cornwall Model Boats.

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats
I decided the next job was to build the four ships' boats,I started with the smallest one, the 18ft cutter, this was to be my first real build of a ships boat, as the ships boats on Pegasus were hulls I fitted out. Again the kit drawings are a bit basic, so using the boat kit as a starting point, I built the boats adding detail from The Anatomy of ship Diana s  drawings, off the ships boats and will hopefully, using the experience gained on the first one built, be able to build, the others even more closely to the books boats. ( below is a photo of the the kit plan for the 24ft cutter and the plan from the book)
The cutter hull build went OK double planked with some 4mm x .5mm timber I already had, I made sure to overlap the joints of the first planking with the second planking to add strength (after a little bit of filler to the the first planking), the frame tabs were then broken off and the hull sanded inside and out with only a tiny amount of filling required, I then planked the bottom inside, the A O S Diana shows fore and aft gratings, so some wooded packs, and a plastic moulded one were ordered, they were both way too thick, so I cut the shape for the aft one from the plastic grating, and then reduced its thickness, and it looks fairly good,next the internal frames were added using plastic strip and painted yellow ochre, and the the seats added, the wash strake next, again from plastic, and the row-locks were then filed out. The tiller was again made from plastic sheet with the hinges added and lastly the tiller arm, the outer hull was then painted, on the 18ft cutter a green band waqs painted, and the rest of the hull satin white. Lastly the anchor, boat hooks, ropes and oars were added for effect, overall I am pleased with this cutter and hope to improve my small boat building on the other three, and I have made a start on the next boat whilst waiting for coats of paint to dry on this one.
Kit plan and the plan in A N O S Diana ( these are the 22ft cutter)


first planking

2nd planking

keel added

grating

wash strake thwarts & grating


Painting


tiller

Completed no fittings


Completed cutter fitted out




 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters


 
 
 
 
 
 

Ships boats 2
The next boat to be built was the 24ft cutter, which was built the same as the 18ft one again it was a mini build and again towards the end I have started the next boat. I am also very pleased how the boat has turned out and looks nice with the blue painted band, and quite workman like with added oars,anchors,ropes,boat hooks,and barrels.
Frames and  keel clamped

1st plank

1st planking and filler 

2nd planking


planking done and false keel added

inside hull prepared

deck & grating

inside painted

inside fitted out

wash strake & rowlocks

painting

tiller

Completed cutter





Both 18ft and 24ft cutters