-
Posts
381 -
Joined
-
Last visited
Reputation Activity
-
Rich.F got a reaction from Vinnie in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hello All, Thanks for the comments and Likes, as always very much appreciated.
Rigging from Jib boom via Dolphin I searched how that to do with this rigging as i could not figure it out, So by asking a few questions. came up with, Drilling out 5mm Dead-eye, Lost a few on the way but, most made it, not the easiest
This is how I have see a few pictures on Net how how I like the look of and how this has ended up
I have also Been working on Anchors
-
Rich.F got a reaction from gieb8688 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hello All, Thanks for the comments and Likes, as always very much appreciated.
Well Been a few months since the last update, I have Completed (almost) Lines, Fore and aft, Starbordside atm.
Could not be bothered at the moment to do the main mast lines.
(Fore )I could make a few improvement, as this side is not the viewing side.
Hard part was making sure lines are same length and level.
(Aft- Starboard) Really Happy how these lines came out.
-
Rich.F got a reaction from gieb8688 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F reacted to src in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Well done rich, good to see you back. Ya life has that way of interfering doesnt it??
Sam
-
Rich.F got a reaction from gieb8688 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Been a long while since a good update. RL getting in the way with a new job. But back for a while as we are moving. Going to be doing a little bit more on the for stays, then it will be boxed until the move
Ratlines 99% Complete.. Worked on the Mizzen stay and the Main Stay.....
-
Rich.F got a reaction from Moab in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Been a long while since a good update. RL getting in the way with a new job. But back for a while as we are moving. Going to be doing a little bit more on the for stays, then it will be boxed until the move
Ratlines 99% Complete.. Worked on the Mizzen stay and the Main Stay.....
-
Rich.F got a reaction from Moab in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F got a reaction from mort stoll in HMS Victory by paulb - Caldercraft - 1:72
Great work so far look forward to updates
-
Rich.F got a reaction from leginseel in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
fantastic planking. per I would not plate the hull looking like that. love how you have a mix of colours in the wood. really stands out
-
Rich.F got a reaction from Old Collingwood in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
fantastic planking. per I would not plate the hull looking like that. love how you have a mix of colours in the wood. really stands out
-
Rich.F got a reaction from Robert29 in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
fantastic planking. per I would not plate the hull looking like that. love how you have a mix of colours in the wood. really stands out
-
Rich.F got a reaction from src in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
They look more red here lol,
-
Rich.F got a reaction from src in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hey Nothing has really happened in months due to my work load and working away...
I have how ever added a picture ready for Christmas
Hope everyone has a great Christmas and New Year.
TC
-
Rich.F got a reaction from Robert29 in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
Bertu, Your build is coming along great, Love the wood work so fare will be a shame if your going to paint it.....
Robert.
LOL That's Not a problem help your self. everything is to be shared.
-
Rich.F reacted to Robert29 in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
Richardjjs
Thank you for your comments and thank you for your information, but to be honest I cannot understand what you mean when you are referring to the deck planking and say ‘BUT it should be joggled 4 apart NOT 2’. The planks on my model are laid in a four butt system, the end edge of each neighbouring plank is offset by 1/5 of twice the length of the planks. Four planks separate the plank ends where they meet edge to edge. Isn't that what you mean by ' 4 not 2'. Am I missing something?
Also you stated ‘Again if you are going to mark the tree nails at least make sure each plank end is accompanied with the corresponding treenails next to each other’. What is the difference from what I did on my model to what you are saying? Again, am I missing something?
Richardjjs, I would appreciate if you clarify this for me, or maybe another member of the forum who has more knowledge and know how than me on this subject enlighten me if the four butt system is the correct one for the HMS Victory, and if so, are my deck planks laid in the correct way?
This is an image of the HMS Victory deck planking. On my model I only marked the treenails on the edge of each plank as I thought that if I mark the once in between as well it was going to be too much.
Rich (Archicar), I hope you don’t mind, I borrowed this image from your great set of photos you took and placed in your log. If you do mind I will remove it. They are great pictures and found them very helpful. Thanks.
Robert
-
Rich.F got a reaction from GrandpaPhil in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F got a reaction from Old Collingwood in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F got a reaction from tadheus in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F got a reaction from dafi in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F reacted to Robert29 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Great pictures Rich, thanks for sharing. I will definitely be referring to them for some detail. My daughter lives in Stratford-Upon-Avon, hopefully on one of my visits to her from Malta I should also give HMS Victory a visit, Portsmouth is not that far from Stratford.
Robert
-
Rich.F got a reaction from balsadustmaker in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Part two
-
Rich.F got a reaction from Robert29 in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hello All, Thanks for the comments and Likes, as always very much appreciated.
Rigging from Jib boom via Dolphin I searched how that to do with this rigging as i could not figure it out, So by asking a few questions. came up with, Drilling out 5mm Dead-eye, Lost a few on the way but, most made it, not the easiest
This is how I have see a few pictures on Net how how I like the look of and how this has ended up
I have also Been working on Anchors
-
Rich.F got a reaction from Shipyard sid in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hello All, Thanks for the comments and Likes, as always very much appreciated.
Rigging from Jib boom via Dolphin I searched how that to do with this rigging as i could not figure it out, So by asking a few questions. came up with, Drilling out 5mm Dead-eye, Lost a few on the way but, most made it, not the easiest
This is how I have see a few pictures on Net how how I like the look of and how this has ended up
I have also Been working on Anchors
-
Rich.F got a reaction from src in HMS Victory by Rich.F - FINISHED - Caldercraft - Scale: 1/72
Hello All, Thanks for the comments and Likes, as always very much appreciated.
Rigging from Jib boom via Dolphin I searched how that to do with this rigging as i could not figure it out, So by asking a few questions. came up with, Drilling out 5mm Dead-eye, Lost a few on the way but, most made it, not the easiest
This is how I have see a few pictures on Net how how I like the look of and how this has ended up
I have also Been working on Anchors
-
Rich.F reacted to Robert29 in HMS Victory 1805 by Robert29 - FINISHED - Caldercraft - Scale 1:72
Finally lower part of the hull all covered with the second planking, but still needs more work, sanding, sealing, varnishing... The small gap between the planks has been purposely left so I will fill with a black filler. Probably now I will continue work on the upper gun deck and continue the upper part of the hull and wales later.
A few photos:
Robert