NMBROOK

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

Like I said before Nigel.  A great Idea.  However at the smaller scales I have found that taking a piece of wood that is the same thickness as the width of the plank and giving it a light coat of paint will do nicely as well.  Once the paint dries you just slice off the planks and apply them in the same matter.  Since I am a firm beliver in scraping a slight irregularity in the plank hight does not bother me.
David B

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

Keith,
I am sure Nigel will answer you, but from my experience, the glue holds the planks upright, no problem.  If they are close together they will wind up glued together.  That is my experience anyway.
Allan

Thank you Nigel, I have been waiting for this. I do have a couple of questions - why do you lay the planks separately, and what stops them from falling over given that you have laid them on the edge? What happens when you clamp the planks together, spread glue over the entire clamped face, and then lay the tissue paper on top?
 
I really like the result. I want to try this!

thanks for the tutorial I will be trying it on my next build
 
just one point as a yorkshireman that seems a waste of tissue leaving such a large gap between planks
 
(this will be lost on most members !)
Andy

Very nice write up Nigel.  The explanation of slicing away the planks from the tissue sheet while the glue is semi cured should be heeded. Too soon will see some tearing but too late is as described previously, possible but difficult.
 
For those in the states,  I bought a pack of black tissue at Michael's some years ago and I think they sill carry it.
 
 
Allan

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

Thank you very much for sharing this with us. It has answer a lot of question about this subject.

I learn something new everyday.  Thanks Nigel.
David B

Thanks Nigel  thats something i will definately be trying

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

Thanks, Nigel.
 I use very thin brown paper, like from packing or botique type bags, with diluted, water soluable, glue and I don't find strength an issue because it seems to penetrate the paper well.
 Whatever finish I use, usually darkens it to a dark, natural color.
 I may be underthinking it, but works well enoigh for the look I like.
 I look forward to your extended use and thanks for the post.
 
Cheers,
Steve

Thank you very much for the tutorial!
 
The clear pictures and matching explanations make it so easy to follow and the results are just perfect.  Thank you again!

Thank's Nigel, I've been waiting for this one , Well done and informative I will try it
 
Best Regards,
Pete

Excellent tutorial, Nigel.  Thanks!

Thanks for the details Nigel. I will be using this technique on my 1/50th scale cutter. I think it looks really good. I did find leaving the glue too long did make things more difficult. I used very fine scissors to trim the tissue.

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel

After experimentation and actually using this technique on my Mordaunt build,I decided I would post a small tutorial of this system I developed due to the interest it caused.
Whilst I am not reinventing the wheel,this is a variation I adopted on the common method of using black paper.There are disadvantages with using black paper,firstly,that it reduces the glue penetration in a joint and secondly,it can appear too thick at the smaller scales.Some may say,the strength is not an issue for planking on a false deck,fair point,but I wanted a system that could be used for all joints where some caulking or similar would be used.This would include scarph joints in the keel where strength is important.
There are many similarities in techniques between using paper and tissue,but there are small differences caused by the delicate nature of the tissue.
This is a pic of the lower gun deck on Mordaunt using this technique.The timber is Pear and the planks are 6mm wide max(the planking is tapered)

To demonstrate the technique,I will be planking a small deck section that goes under the main deck hatches on Norske Love.This piece doubles up as part of the structure and is made from 6mm birch ply.No camber is incorporated as this will be unnoticeable as the only real view is through a companionway.It does have some shear and this is conveniently catered for by the bow the ply has attained,being stood in the corner of the workshop for several months.
The planks are cut from 3mm boxwood sheet.Cutting from the edge of the sheet,using the thickness as the plank width,helps maintain consistency.I cut the planks @1.5mm thick.To me this is less important as the deck will be scraped/sanded smooth.All gluing is done using Deluxe Materials Aliphatic Resin.The black tissue paper is acid free and bleed resistant.I obtained mine from WHSmith in the UK and can be found in the present wrapping section.

A section of tissue was placed on a small piece of clean glass.Glue was added to one side and one end of the plank.The plank is placed edge down on the tissue,ensuring the tissue develops no creases and the plank is firmly down on the glass.I then slice the tissue with a new scalpel blade to form a 'finger' that can be curled up on the plank end.The process is repeated until you have a good quantity of planks 'edged'.
]
When the glue goes clear,but not fully set,slice through the paper between the planks.The individual planks will simply break off the glass with a little twisting pressure.The tissue should remain intact on the plank.Whilst the glue is still in the 'green' stage (a bit like cheese as it hasn't fully hardened),carefully trim the tissue flush with the plank faces.Keep the scalpel blade cutting toward the plank,not away as this can drag pieces of tissue off the edge.You can wait until the glue has hardened overnight,but I found this much harder and more time consuming.

Lay the planks in a conventional manner,ensuring to keep the tissue covered faces going the same way.I brush over the surface with a small wetted paintbrush.This consolidated any glue that has oozed out and is added insurance against the tissue dragging with the sanding and scraping.

 
Kind Regards
 
Nigel