loupy45

Hi Bob,

Thank you very much for the compliment.

The ship is all in walnut, some wooden strips are darker and some are lighter, therefore I kept the darker strips at the bottom of the hull as much as I could. 

Once the hull was roughly sanded I proceeded in using and abrasive cloth, the same type that is used in polishing stainless steel, after that I finished off with another abrasive paper "silicon carbide" 400.   The end result is that the wooden hull became very smooth; it feels like "velvet", or like the skin of a dolphin if you ever touched one.😀

Then I applied a very transparent varnish. That's all.

I have just completed the dust cover in Plexyglas and aluminium. See attached.        

Hi Nate,

Thanks, sure no problem any time.

Cheers,

Renato

Hi Mark

Thanks for the photos and congratulations you have build a beautiful ship.

Regards,

Renato  

Welcome to MSW Nathan, I am living in Cape Town

Regards,

Renato 

It basically sums up the quality of AL, with my kit I had to cope as well with warped pieces of wood. I completed the San Juan Nepomuceno in 47 months. The photos of the completed model are posted on this forum.

Regards,

Renato  

Ciao Antonio, se vuoi ti posso aiutare.

Cordiali saluti.

Renato 

Hello form Cape town (Durbanville) , unfortunately you will have to pay customs and post office handling charges.

 

I purchase my  kit  from Artisania Latina "San Juan Nepomuceno" in Barcelona while i was on holiday.

I took me 47 months to finish. I posted the photos on the MSW. 

If i can be of any assistance let me know.

Regards,

Renato

 

 

Thank you  for your  comment, it is very much appreciated.

Regards,

Renato 

Building the Artesania Latina(AL)  San Juan Nepomuceno (SJN).

The kit was purchased in Barcelona in a modeler’s shop called Casa Palau (Home Palau). The name Palau has some distant and fond memories, when on a navy pass, Palau was my first stage of a long trip to my home in North Eastern Italy . This was in my younger days when I was in the Italian Navy School at the Island of La Maddalena in Northern Sardinia.

I commenced building this kit in May 2015 under the supervision of the ever-present Smokey my loving cat which died of cancer in February 2017.

After that I was unable to give any attention to the model for more than 2 months.

In August 2018 I had a surgical intervention on my left hand which I am still recovering from very slowly.  

The SJN is my second model, the first being the (AL)HMS Endeavour.

 Having said that, I was introduced to this hobby by my wife having received this wonderful model on my 60th birthday.

I was somewhat puzzled then as I didn’t have a clue, or the know how, in building 18 centuries wooden ships models.
My wife’s idea for me in having this kind of hobby for my retirement present was fantastic, but as I realized very quickly, that this was not going to be an easy task .

However, in the meantime, I was recalled by my ex employer and worked as consultant for another 5 years, consequently the kit remained in the box.

Finally, in between many trials and tribulations the (AL) HMS Endeavor was completed in 2013. After that challenge I was’’ bitten’’ by the hobby. 

What surprises me is that two years later instead of going for an easier model I went for even a more challenging one, maybe it is the nature of my character.

I must emphasize that the AL SJN kit was marred from the very beginning. The AL Elite Series are made by their branch in Hong Kong and it shows in the quality and parts some of which were undersupplied and some oversupplied.

The kit’s wooden parts are all in walnut, however in my kit most the sticks and dowels were all warped , the plywood wood quality was horrendous as the glued compressed sides came apart easily, even when filing it with a simple nail file. The false keel was packed in plywood as well. Coupled with all this, the main bulkhead frame was warped, the cannon bores were of centre and one anchor was twisted.

This is a cat.4 difficulty but the difficulty is compounded even more due to the poor quality of the parts.

However, AL kindly assisted me during this time, right up to now and although the parts took some time  to get to Cape Town (8 weeks) , their response and support is very good.

In South Africa it is very difficult to get tools and parts for this hobby, and what is available on line is at an horrendous price due to our currency being worth a fig!! And the delivery costs are prohibitive un less you want to mortgage your house !! 

I can’t count the amount of hours spent on this kit , neither my exasperation, confusion, satisfaction, and fascination.

I have added some extra details that are not part of the kit or the given drawings. 

Therefore, one must adapt, plan, and use brain resources. During my ship modelling I had help from a friend in the USA a lot of encouragement from my wife.

Hopefully the attached phots will encourage beginners like myself. 

 

SAN JUAN NEPOMUCENO HISTORY:   

San Juan Nepomuceno was a Spanish ship of the line launched in 1765 from the royal shipyard in Guarnizo (Catanbria). Like many 18th century Spanish warships she was named after a saint (John of Nemomuk). She was a solidly built ship of proven seaworthy qualities. Captured by the British Royal Navy during the Battle of Trafalgar, the ship was renamed first HMS Berwick, then HMS San Juan. The ship was discarded in 1816.

Design and description

Her sister, were San Pascual, San Francisco de Asis, San Lorenzo, Santo Domingo and San Augustin.

She was originally fitted with a total of 74 cannons: 28 24-pounders, 30 18-pounders, 8 12-pounders and 8 8-pounders, and was manned by 8 officers, 11 midshipmen, 19 leading seamen and 492 able seamen (530 total). Her supply capacity was for 60 days victuals and 80 days water.

Service history

She rendered numerous important services to the Armada, some of them in the Caribbean where she participated in several sieges and was distinguished in 1779.

In 1793, she took part in the Anglo-Spanish occupation of Toulon under the command of Admiral Don Juan de La’ngara. Four years later, in 1797, she was part of a Spanish fleet under Teniente General Jose’ de Cordoba y Ramos at fought against the British at the Battle of Cape St. Vincent.

Battle of Trafalgar

 

The Battle of Trafalgar is the historical feat in which she participated and of which we have the best account. In spite of being dismasted by Admiral Nelson’s artillery on 21 October 1805, she achieved glory in this battle under the command of the commander Don Cosme Damian Churruca and constituted for the Spaniards a handsome example of the heroism of their nation and the bravery of their sailors.

San Juan Nepomuceno was one of the last ships still fighting after most of the French ships had surrendered and most of the Spanish ships had either been captured or had yielded. The commander, Don Cosme Churruca, had previously ordered for the flag to be nailed to the highest mast.^] At the time, it was commonplace for ships to signal surrender by lowering their nation’s flag. 'Nailing the flag' was a way to tell the enemy, allies, and indeed the ship's own crew and officers not to expect an easy surrender. As the hours passed Churruca, whose leg had been torn off by a cannonball^] the deck of his ship covered by the blood of his wounded and dead seamen, continued to stubbornly order his ship's batteries to fire. Mortally wounded, the Basque-born Churruca prohibited his officers from surrendering and ordered them to continue returning fire whilst he remained breathing. His officers kept their word, even after Churruca died and command of the ship had been passed to the second -in command, Francisco de Moyna,^] who continued the fight until he himself was killed. He was replaced by the next officer in command who also refused to surrender. However, unable to break the circle of fire formed by the six enemy ships, including Defiance, Tonnant and Dreadnought, and in order to prevent the ship from sinking with all the wounded trapped below, the last officer left alive in San Juan Nepomuceno yielded with over 400 dead and injured on board.

 

 

Royal Navy service

 

After Trafalgar, the ship was taken into British service and briefly renamed HMS Berwick before adopting the name HMS San Juan. In honour of Churruca's courage, the cabin he had occupied while alive bore his name on a brass plate, and all who entered it were required to remove their hats as a mark of respect for a gallant enemy. She initially served as a base hulk at Gibraltar from 1805 to 1808 before being recommissioned in September 1808 as a prison ship under Commander John Gourly.^[

During the Penisula War San Juan was fitted to act as flagship to a flotilla of gunboats based in Gibraltar. For this task she was re-rated as a Sloop and placed under the command of Commander Thomas Vivion, who was the first flotilla commander, taking post in 1810. He was followed subsequently by Commander James Tillard who took command in 1812. There were a total of fourteen lieutenants under his command, each of whom took charge of one of the gunboats in the flotilla. As the gunboats had little capacity for accommodation, the lieutenants were assigned to, and lived aboard San Juan. In later service San Juan acted as flagship to the admirals appointed as Commander-in-Chief Gibraltar. In 1813 she was flagship to Rear Admiral Samuel Hood Linzee with Captain John Fraser acting as flag captain. In 1814 she was flagship to Rear Admiral Charles Elphinstone Fleeming with Captain Gardiner Henry Guion acting as flag captain. Her final commission began in October 1814 when she reverted to her original role as a base hulk under the command of Lieutenant Charles M'Kenzie. San Juan was finally paid off and sold at Gibratalr on 8 January 1816.^]

Sources & references

·         John D. Harbron, Trafalgar and the Spanish Navy (1988) ISBN 0-87021-695-3

·         Rif Winfield, British Warships in the Age of Sail 1793-1817 (2005) ISBN 978-1-84415-717-4

·         Robert Gardiner, Frigates of the Napoleonic Wars (2000) ISBN 978-1-86176-292-4

·         Historia del navío de línea San Juan Nepomuceno (in Spanish)

Saluti da Citta' Del Capo e benvenuto al MSW . 

Ciao.

Renato

Welcome to MSW.

Regards,

Renato

Hello Javier, congratulations on your models they are superb!! Great skill and workmanship.

Welcome to MSW.

Un saludo,

Renato

Hello Angel ,it is very beautiful and inspiring.

Regards,

Renato

Hello Ivan, 

Welcome to MSW, as well I started with Artesania Latina  HMS Endeavour it was a retirement gift from my wife. The problem with this gift was that i didn't have a clue from were to start. I left the gift on the box for 3 years as I went back to work, after that i had another look at my gift and started building the model. I gave up 5 times.

My "Admiral" encouraged and supported me during the building stages and it took me 5 winters to complete. It is a Cat 4 difficulty therefore is not easy. Basically you will need to adapt,persevere, with lots of patience and innovation and you will complete the model. You will find challenges in building the kit, however skills you will acquire as you go along don't worry enjoy it is a fantastic hobby. I would recommend 2 books : Frank Mastini's Ship Modelling Simplified, and Lennarth Petersson's Rigging Period Ship Models. Good luck.

Renato                

Hello Javier,

welcome to MSW, your model looks great , It must take lots and lots of patience.

Regards,

Renato

Hello Angel,

fantastic work!!!

Renato

Hello Quincy and welcome,

I started building the the San Juan Nepomuceno 3 years ago.  From the photo your model looks OK, mine was not, the material was mostly warped and the casting was of inferior quality.

I guess your kit is from A L Elite Series out of their branch in Hong Kong? Don't worry you will make mistakes as it is a difficulty 4 kit , but the main object is that you must enjoy it. I didn't start a blog OF my SJN on the MSW but i hope to do so soon. If you wish to correspond regarding the ship build frustrations, difficulties, and satisfaction. Let me know . This is my second kit.

Attached  are some pics. 

Regards,

Renato    

Welcome to MSW from Cape Town. Your wife support is very important as it is a time consuming hobby.

Renato   

 

Quite a task, my very best wishes on your restoration.

Regards,

Renato     

Hello Oscar, welcome and good luck with your project.

Regards,

Renato 

Hello Mike a very warm welcome from Cape Town, the first city in the world that may run out of water!!!

Regards,

Renato   

Hello Peter welcome to MSW, good luck with your project. Renato

Welcome to MSW. Padua... is like the town of Padova  in Italy? 

Hello Oliver , welcome to MSW enjoy the new hobby.

Hello Scipios, welcome to MSW.

Regards,

Renato