Tomasz B

Finally sorted out 👌

So the problem was microsoft edge web browser, when i tried editing did not have cursor anywhere in post to place pictures where i want them for some reason 🤔so got chrome now and works just  fine 😊....

Looks like web browser sometimes have a bad days as well 😅🤣😂😆

All sorted now thanks good people for suggestions.

52 minutes ago, mtaylor said:

No.  I've never had to do that.   

I will keep trying .maybe  my web browser don't work properly. 

Well basically i started this build vlog just after i started rigging ratlines so my first post have about 60 pictures in it - quite a lot 😅 so that pictures are different size as well from 1600 up to 5000 width so maybe that's the case...

2 hours ago, Rik Thistle said:

I upload photos one at at time. As James says, I place the cursor where I want the first pic to go, then put the cursor a couple of lines below the first pic (to leave room for text), then click on the next pic to be inserted and so on.

 

I have to say that sometimes I end up with a couple of unwanted repeat pics at the end, under my post. Not sure why that happens, and I can't seem to delete them. But it's not a showstopper.

 

Richard

Thx ,do i have to save it after each picture and edit again over  and over? 

Hi 👋

I am trying to solve my issue with pictures order on my very first post ,

doesn't matter i upload the pictures 1 after 1 or in bulk they are uploading in order they want.

Already edited few times with no success.

Maybe i should delete all those pictures from first post and upload them again 🤔...

Any suggestions very welcome 

Hi All.

Little rigging and sail update 

Just to see how it looks like.

I think i go for it 

Hi All 👋.

Since last post been experimenting with sails (just didn't like the kit ones -too thick and  bad looking sewing imo)

Wasn't sure i want them😕 cuz i don't have sewing machine,

hand sewing ? Hmm tried , is not for me 😅

So i took cloth double the size of a sail and mark exactly half on it then stained one of them 

Next pulled stained strand through .

they looks not bad i think-not perfect but i am happy with , i will add rope on every edge later after shaping them and some more details on them but not sure yet what kind of🤔

not 100%sure how they should looks like...

But this time wasn't able to make that tracks out of wood ,i used 22 awg wire sleeve brown...

8 minutes ago, kirill4 said:

Good day,

This variant looksmuch better,!:)

Thanks ,is more like proper size compare to mast diameter  i think.

Hi all.

Had to resize parrel bead, was to big imo... just did smaller.

1 picture is way too big. Last picture smaller one 

But i think this block will be to big as well 🤔

1 hour ago, kirill4 said:

Please consider the way, how to fitt them right way ! :)))😂

As usual - from R.C.Anderson book

 

Just have read exactly the same page ha ha... is fig 309 can be applied to my case 🤔when i have only 2 rows of tracks ? 

After few attempts finally make mizzen mast  parrel made of walnut and pine. Just hope they where used in that era 🙏if not please don't tell me 🤐🤣🤣🤣🤣🤣

So here it is. Heights of this block will be adjusted later when yards done,but i think just like now is quite good (i am satisfied with 😌) 1 more to go. Also did some work with mizzen boom?(if boom is correct still Learning ,apologies) 😃  

Also will replace ropes supplied with kit to my own ones made it yesterday 

On 2/9/2021 at 6:55 AM, kirill4 said:

Good day Tomasz,

Did You mean this arrangements?

One,4th sheave of the knight  need to be left free - it is used for top rope

Good morning sir. Yes first left sheave will be free(as mentioned earlier those ropes are not glued yet they are like that just for now)this halliard picture is from GH London i will follow...

2 hours ago, kirill4 said:

Good day Tomasz,

Have question , for what there is one more running end of the tie halliard , as seems on the foto there are two? but tie halliard is a single rope ...

Knight with 4 sheeves may be  correct - on Your model mast cap is continental form/type (which is not correct for this ship, but choozen by kit maker as I understood)) but not in english style as it should be/it should be like a half brick ... and such shape and method of connection mast and top mast (moveable)suppose the top mast could be lowered ... in such case , 4 sheeves in the knight quite reasonable...4th sheeve could be used for top rope...

I will fix it like this... 😅🤣 i am not good with drawing 

And my primitive blocks  drum sander ( just did the job) drill powered 

Little improvement of kit blocks -sanded and reshaped and stained. 

And this one is not glued yet ,on 1 side there must be a cleat as well 

9 hours ago, kirill4 said:

Some remarks...

These ropes are free to move for future yard adjustment  is not glued yet, i have to make few cleats and fix them in place like this. 

Almost forgot, also work on yards little bit 

Or like this so so confused 😕

Mostly because of this instruction is like this -i think they mixed 2 different ships imo....