Kevin
-
Posts
7,006 -
Joined
-
Last visited
Reputation Activity
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Ponds
well that took a lot longer than anticipated, about 150 cuts of strip wood, took me most of the day, but for now it looks ok.
I still gave to adapt the bottom board to sit tight to the deck, and then see if i can simulate handles, or cut slots out to enable lifting, and then weather, and put back into the same position they were removed from, Real world DIY tomorrow so hopefully by the weekend
-
Kevin got a reaction from chris watton in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Ponds
well that took a lot longer than anticipated, about 150 cuts of strip wood, took me most of the day, but for now it looks ok.
I still gave to adapt the bottom board to sit tight to the deck, and then see if i can simulate handles, or cut slots out to enable lifting, and then weather, and put back into the same position they were removed from, Real world DIY tomorrow so hopefully by the weekend
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Hatches
well back to the pointy end, and the fish hatches Balsa wood, sprayed back and dry-brushed to tone it all down,
-
Kevin got a reaction from chris watton in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from lmagna in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Hatches
well back to the pointy end, and the fish hatches Balsa wood, sprayed back and dry-brushed to tone it all down,
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
as i try to close the stern off, adding blocks and now the Gallows, which were build up quite a while ago, the basic unit is secured into position and at present i am making the retaining bars from brass rod, i was undecided what base colour to use, but went safe and used black
-
Kevin got a reaction from popeye the sailor in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from gieb8688 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from GrandpaPhil in HMS Diana by Shipyard sid - Caldercraft - 1/64 scale
im fine thank you, as is the wife and doggie, i finished the Victory last year, and did a bit on the SD14, but presently have the St Nectan on the table, great to hear from you, and hope you will be around and staying with us
-
Kevin got a reaction from realworkingsailor in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from chris watton in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Hatches
well back to the pointy end, and the fish hatches Balsa wood, sprayed back and dry-brushed to tone it all down,
-
Kevin got a reaction from GrandpaPhil in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from popeye the sailor in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Hatches
well back to the pointy end, and the fish hatches Balsa wood, sprayed back and dry-brushed to tone it all down,
-
Kevin got a reaction from FriedClams in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
me again
thats the hatch covers nearly completed, just a bit more dry-brushing
-
Kevin got a reaction from popeye the sailor in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
as i try to close the stern off, adding blocks and now the Gallows, which were build up quite a while ago, the basic unit is secured into position and at present i am making the retaining bars from brass rod, i was undecided what base colour to use, but went safe and used black
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
Good evening everyone
made a very stupid mistake today, whilst doing the photo shoot, the light breeze took the build for a flying lesson, did a little damage, you can see it in the photo on the capping rail port side by the yellow cod liver oil house, I was lucky to get away with it, because 30 seconds later it would have had the superstructure on
anyway the hull looks ok now, it is very nearly the same on both sides, the admiral didnt notice it, and anyway one side will never be seen again when in the diorama
so here are a few photos taken today post flying lesson
and another lesson learnt today, is acrylics do not adhere to silver oxcide spray paint, hence the whale back is looking patchy, lol i like the look
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone,i hope everyone is well and safe, Happy Easter,
the capping completed and foredeck is now in position, i should have left it another day, but changed my plans on the way ahead as i seam to be torn between the chicken and the egg. i cannot progress the deck with out doing the hull, and the hull is to big to move around to progress the deck with out scratching anything. but in the end, the hull won
the whaleback has had a coat of primer then aluminium oxide. and yellow ochre. the hull has been sanded and sanded, where to a stage it will have to do,
the red is Halfords Rattle can Red Primer, and the same brand Matt Black for the top of the hull, there is a lot of over-spray onto the red but it needs another coat
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
left the diorama for a while, i have a build to do as well
the hull is getting some attention now, starting with the after capping rail, i have still to adjust it width wise where the rail leave the rounded part of the cod liver house, but will be done as the next part is made up
and today she saw her first coats of paint on the hull, i can now see the areas that need work doing on it
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
lots of ideas for the diorama, but i may start a new thread for that, so i can attack some comments, who dont see my long build lpgs
but for now i have got a boat to build and finish,
the radar mast got some attention today, the radar will have to be removed in the future
quite a lot has changed since the mast as completed
painted silver with a black wash over the top
the radar dish is from the kit, will one day put something in its place that looks like one
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
lol OC this is your fault
i have now decided on how to display the build
how do you intend to display the build kevin? i hear you ask
well in a diorama of course
here are a couple of ideas i have
version 1
in this version i like the right hand side idea, of the vessels tied up against a wall
these two appeal to me, may be a combination of the lot
any other ideas will be accepted. i will have about 6 foot by 4 foot and plenty of height to play with
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
Good afternoon everyone
been thinking of how to display this 6 foot monster, and what configuration i would like to display, any ideas gratefully accepted
anyway with that in mind, i did a few detail bits
made the lockers look like they opened, still to be painted
a stash of barrels
and the ash chutes are fixed into position
-
Kevin got a reaction from PeterB010 in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
Good morning everyone
Thank you for the likes and comments
the boom rigging will be done at a later date when i have a better understanding of where all the lines go, also depending on how she will be displayed
work progresses on the build, and i am thoroughly enjoying it, yesterday the stanchions above the ladders were completed,sprayed with white primer and a grime wash put on top
the big parts that were made up a few months ago and now being fitted, another week or so, i may have to put her on hold, as the hull will then require work and its just too wet/damp to do it,
-
Kevin got a reaction from mort stoll in HMS Diana by Shipyard sid - Caldercraft - 1/64 scale
im fine thank you, as is the wife and doggie, i finished the Victory last year, and did a bit on the SD14, but presently have the St Nectan on the table, great to hear from you, and hope you will be around and staying with us
-
Kevin got a reaction from GrandpaPhil in St Nectan by Kevin - FINISHED - Mountfleet Models - 1/32 - Steam Trawler - Completed June 2020
good evening everyone
Fish Hatches
well back to the pointy end, and the fish hatches Balsa wood, sprayed back and dry-brushed to tone it all down,
Our Emblem ®
