ancre La Belle 1624 by cabrapente - FINISHED

[cabrapente]

hi all.

 

in July 2010, I decided to try the belle.

 

 

was my first serious project boat.

 

 

Thanks to this work, I have finished my love of modeling.

 

[cabrapente]

okay. after many laps and to make rules of three, I got the plans for the keel and frames at the same scale. average levels of frame, the photocopied one by one, in a sheet, leaving room, and when bent, the center line, place them in a window, and can trace very well. these, I've got 4 copies, to cut, assemble frames, and leave a "new for what might happen"

[cabrapente]

wow. I myself believe it. is contrary to what I thought, very easy to do on the advice of the veterans. the glue stick, easy to use, and comes off with just teach the lija.hoy could do 3 frames, but it costs a lot less than with the victory, and are infinitely better.

[cabrapente]

how to make a rib is sticking the pieces, so that on both sides there drawing. in the first photo, are all parts of the front. in the second, is that I flip, to a face.

[cabrapente]

I have already keel ...

[sonicmcdude]

Nice start. What is the wood that you are using?

[cabrapente]

as do the stern, contrary to what I thought, I struggled a lot.

[cabrapente]

home had a rotating support televisions, making a nuisance. and see where I have won an amazing place to shop, and laid on the jigsaw.

some overlapping frames.

[cabrapente]

After many attempts, I finally got, make the nose, with the pieces that go on the plane. earlier, they fell short or long.

[cabrapente]

as frames and nose, are not as think it has to be. I had to cut the frames for abajo.estoy a bit lost, as I like to do I care fielmente.no repeat as many times as it takes.

to see if someone gives me advice. Thank you.

the nose, I've gained a bit to match the frame.

[cabrapente]

Well as I worked so hard to make the nose, I began to doubt the blueprints. so I got to ride over to see what happens.

I think the plans are almost well. the frame 10, I have to repeat it, because the court much. and the nose, I also have to change. When finished sanding frames, check again.

[cabrapente]

good and see what happens.

[cabrapente]

after making the figurehead for the fourth time, is going wrong. superimposing the frame 11 on the flat (which I did not before ... wxjrpttt), it is clear that the measures are not well.

[cabrapente]

September 2010.

While I have serious doubts. the boss (who has won heaven), has promised me monograph fleuron him, but I do not have room for that bug. and lower levels, if not reliable, apart from the added expense .... la belle, I can go with it, but I have to modify measures because the planes are not well. and want to do something that fits reality. therefore. is there anyone who has made the belle, and want to sell your flat? Do you know any other monograph bower, which is written in Spanish? thank you all.

[cabrapente]

uff I found a century. I already have the monograph. I'm reading and begin to make photocopies. now to start from scratch.

 

this afternoon I prepared the original frames on paper. first photocopied the plane. - I cut each frame. - the photocopied individually, leaving room. - the bend in the middle and the sticker in a window, or a glass table with a lamp debajo.mañana, repeat them three times. two, to glue on the wood and cut. another template to use when attached. that is, the keep.

 

[cabrapente]

these frames, keel and do not coincide with the planes of the monograph.

[cabrapente]

these other if they can utilizar.empiezo a new keel, which is not as I thought at first. the good is below ... if I'm not mistaken

the rabbet did a useful thing I saw in a forum

[cabrapente]

I still have the keel

[cabrapente]

contrary to what I thought, I find it harder with the monograph, as before. I mean. before (to victory) if something did not fit, he added or took away asking me. Now, the first thing is to try to learn the names and take them to the plane. and once I find out, get a picture as faithful as possible to build the piece. but more I read, the more things I discover. every night I fall asleep reading and locating parts of the ship

[cabrapente]

I got a cherry plank. and I bought cinta.no saw is very good, but I've put PROXXON leaf and is luxury.

and I'm trying to get decent strips of scraps of ebony. sawdust, coal seems.

[cabrapente]

and I have all the frames

[cabrapente]

Good. if I've gone mad, I stopped short. but finally I came superimpose the last four frames. the lower boundary is a straight line along the top of the keel.

[cabrapente]

are running very well. no gaps.

[cabrapente]

Good. I caught one by one, measures the height of the frames, in the plane No. 7. and one by one the measures in ls frames planes 4 and 5.

are not accurate. no frames, which are not drawn whole. and there is much left over at the top. my question is cut for your site. I will guide me along the line n º 7.If each leaf of each frame, I marked the heights. Anyone can tell me if it is correct? what rules, is the vertical line on the right, which is the height in the plane No. 7. so I checked all the leaves. Thank you.

[cabrapente]

they do not know how, the notches of the keel, not well ... I cut all the pins, and I started from the teacher out, and with the squad, I have repositioned. I think it should do so first.

[cabrapente]

I think all the measures go well ... for now.

[cabrapente]

the sleeper, not hard-working.

[cabrapente]

ligations of the hawse, I keep getting problems. I think not read the plans.

 

and am getting a "tape" in the book calls Frolich,: moulurée lisse large. Well these slats to give rigidity.

[cabrapente]

I have to find more clips.

[cabrapente]

November 2010.

Today I began with the transom.