Jump to content

Recommended Posts

Posted

 

On 2/25/2020 at 10:42 PM, dzerbato said:

I am certainly impressed with the Syren blocks, particularly at this scale, they really do make a huge difference. 

I just ordered Syren blocks and deadeyes, there's no way I can make the kit ones look as good as theirs.  You're right... this big of a scale makes everything more obvious!

I have some wiggle room on my mast partner so I plan on mounting it after I drill for the lower deadeyes. That way everything "misses each other" correctly.

Bob Cardone

 

On the bench:

Gunboat Philadelphia Model Shipways 1:24

CSS Palmetto State Verlinden 1:200 

Next up:

USN Picket Boat #1 Model Shipways 1:24

Completed:

F-4 Phantom Hasegawa 1:48

Smilodon Fatalis Unknown manufacturer and scale

Panzer IV 1:32 Unimax/ Forces of Valor prebuilt with mods, diorama

 

Member of the Nautical Research Guild         

 

 

 

 

Posted (edited)

I've made some progress on this build. I've completed the cannon carriages, added the cannon ball racks, completed the stove, and rigged the 12lb gun. I must say rigging my first gun was pretty fun for me. The Syren rope and blocks really make a difference in the overall appearance of the model. I had never really thought about it, but the tackle really works (until I glued the carriage, lol). For the stove, I used the advice of some of the other builds on this site and make bricks using clay and the wood cutout as a mold. I used white putty as grout. It's intentionally a bit messy, but needs a bit more clean up. I added some burned match sticks and ash as well. I thought it came out pretty decent. I made one rope coil for the slide tackle, but that was a pain. I may just pre-make them and glue them down for the others.

 

 

 

IMG_1586.JPG.92e18102a92c370e907bd93db6ebb58a.JPG

 

IMG_1587.JPG.fcd56ee72f7bda06adbc7716bb6755ab.JPG

 

IMG_1588.JPG.b2e877e428b29374ab6a102aa44a943a.JPG

IMG_1591.JPG.98dbc934b2444a857b9f3aa11c426ee9.JPG

IMG_1593.JPG.5966670be17156d59f0490fd2bdd4dfc.JPG

IMG_1594.JPG.fc596942ddd55c69196c4679cb2578de.JPG

 

IMG_1592.JPG

Edited by dzerbato
Removed duplicate picture
Posted

Great!

The deck plank beveling really shows up well. The bricks came out very realistic and those Syren blocks look nice. I'm also going to pre-make the rope coils and install them later.

Is that the kit supplied carriage rigging?

Fine work, I'm really enjoying and learning from your build log.

BobC

Bob Cardone

 

On the bench:

Gunboat Philadelphia Model Shipways 1:24

CSS Palmetto State Verlinden 1:200 

Next up:

USN Picket Boat #1 Model Shipways 1:24

Completed:

F-4 Phantom Hasegawa 1:48

Smilodon Fatalis Unknown manufacturer and scale

Panzer IV 1:32 Unimax/ Forces of Valor prebuilt with mods, diorama

 

Member of the Nautical Research Guild         

 

 

 

 

  • 3 weeks later...
Posted

After a few weeks, I've made some more progress, but nothing spectacular. The cannons are completed now, the rails installed, rear rails installed, catheads and the swivel gun bases. The rails detail continues and I've started work on the rudder. I'm really enjoying this build and really like the scale of this boat. Rigging the cannons was very satisfying for me. Here are some pictures.

 

IMG_1633.JPG.ba312f5a6c96939cc5c2ed34707b6c32.JPGIMG_1632.JPG.76034ed0fff5338359eaf49b2809afde.JPG

I stained the catheads Minwax natural to match the interior, but looking at this picture, I may refinish them to match the rail. We'll see.

558233816_IMG_1634(1).JPG.b8b31cbdd5669764aaa4877a701956d7.JPG

IMG_1635.JPG.4d4162dbf85eff411e77069978f94b17.JPG

Posted
1 hour ago, dzerbato said:

I'm really enjoying this build and really like the scale of this boat.

Big scales have a lot of advantages (except they're huge!). She sure is a fun build, with a lot of neat features.

Your boat is looking fit and trim, I like the natural interior- it really sets the contrast with the hull and cannons. Really nice workmanship, and I see you installed the rail caps just fine.

How is the brass blackening going?

Bob Cardone

 

On the bench:

Gunboat Philadelphia Model Shipways 1:24

CSS Palmetto State Verlinden 1:200 

Next up:

USN Picket Boat #1 Model Shipways 1:24

Completed:

F-4 Phantom Hasegawa 1:48

Smilodon Fatalis Unknown manufacturer and scale

Panzer IV 1:32 Unimax/ Forces of Valor prebuilt with mods, diorama

 

Member of the Nautical Research Guild         

 

 

 

 

  • 1 month later...
Posted

It's been a while since I've posted an update. My wife and I had our second kid in April, so modeling time has been tight, or I'm just too tired, lol. I have made a bit more progress and gotten some of what I'll call the harder parts done. The mast and yards are completed. They are made from wood dowel. I tapered them by carving to square first, then taking the corners down and finishing by using my electric drill and sand paper. The drill worked great and was very easy. I just left more of the dowel on the end to not have the drill damage the piece. 

 

I also finished up the final touches on the hull. I added nails to the swivel gun stanchions and prepared and installed the two swivel guns that come with the kit. I added the various cleats as well. Next is to start the rigging.

 

IMG_1705.JPG.6f22eb2f3c75e4e1f69ebd9cff0c21b4.JPGIMG_1706.JPG.82bba60d191a8f543fb76cec2b1966a2.JPG

 

IMG_1707.JPG.d3a53d27eb7b5bb6025ea268bd52fa40.JPG

 

 

Posted

Congrats on your second child!  I had three kids during my Badger build, and it ended up taking me 5 years to complete so I know what you mean :)  Nice job on the Philadelphia!

Mike

 

Current Wooden builds:  Amati/Victory Pegasus  MS Charles W. Morgan  Euromodel La Renommèe  

 

Plastic builds:    Hs129B-2 1/48  SB2U-1 Vindicator 1/48  Five Star Yaeyama 1/700  Pit Road Asashio and Akashi 1/700 diorama  Walrus 1/48 and Albatross 1/700  Special Hobby Buffalo 1/32   IJN Notoro 1/700  Akitsu Maru 1/700

 

Completed builds :  Caldercraft Brig Badger   Amati Hannah - Ship in Bottle  Pit Road Hatsuzakura 1/700   Hasegawa Shimakaze 1:350

F4B-4 and P-6E 1/72  Accurate Miniatures F3F-1/F3F-2 1/48  Tamiya F4F-4 Wildcat built as FM-1 1/48  Special Hobby Buffalo 1/48  Eduard Sikorsky JRS-1 1/72

Citroen 2CV 1/24 - Airfix and Tamiya  Entex Morgan 3-wheeler 1/16

 

Terminated build:  HMS Lyme (based on Corel Unicorn)  

 

On the shelf:  Euromodel Friedrich Wilhelm zu Pferde; Caldercraft Victory; too many plastic ship, plane and car kits

 

Future potential scratch builds:  HMS Lyme (from NMM plans); Le Gros Ventre (from Ancre monographs), Dutch ship from Ab Hoving book, HMS Sussex from McCardle book, Philadelphia gunboat (Smithsonian plans)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...