Gremreeper1967 Posted April 5, 2020 Author #31 Posted April 5, 2020 14 hours ago, Edwardkenway said: It's looking good, very tidy planking btw!😁👍 Edward, thank you but they are not quite as tight as I wanted in some spots. Quote
catopower Posted April 5, 2020 #32 Posted April 5, 2020 Nice progress on your model. The planking looks great! Quote Clare Hess He's a -> "HE" Current Builds HMS Wolf, 1754 - Shipyard Laser Cut Kit Kitamaebune - Japanese Coastal Trade Ship, 18th/19th Centuries - Woody Joe Kit Atakebune - Japanese Sengoku Period Warship - Woody Joe Kit
Gremreeper1967 Posted April 5, 2020 Author #33 Posted April 5, 2020 5 hours ago, catopower said: Nice progress on your model. The planking looks great! Thank you cat. Quote
Gremreeper1967 Posted April 7, 2020 Author #34 Posted April 7, 2020 Planking is complete with the exception of a few touch ups. I do have one issue however. The last picture shows what needs to be fixed. According to the plans, it is above the water line but I don't have any measurements for the water line. I'm measuring off of the actual size plan. Any ideas as to what to do with this area? Edwardkenway and GrandpaPhil 2 Quote
Gremreeper1967 Posted April 7, 2020 Author #35 Posted April 7, 2020 I had to make my own ballard's. 6mm tall and a tight .010 tolerance with a have drill and files. Who needs a lathe. Lol VTHokiEE and GrandpaPhil 2 Quote
Gremreeper1967 Posted April 9, 2020 Author #36 Posted April 9, 2020 About 45 days later and the hull is 90% done. VTHokiEE, Edwardkenway and GrandpaPhil 3 Quote
VTHokiEE Posted April 9, 2020 #37 Posted April 9, 2020 It’s looking quite good! Is there a reason not to have the waterline painter across the bottoms of the stern? Edwardkenway 1 Quote Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
Gremreeper1967 Posted April 10, 2020 Author #38 Posted April 10, 2020 1 hour ago, VTHokiEE said: It’s looking quite good! Is there a reason not to have the waterline painter across the bottoms of the stern? That's where the line was when I marked it off. After looking at the pictures, it does look a bit narrow. Thanks for the tip. Quote
VTHokiEE Posted April 10, 2020 #39 Posted April 10, 2020 This little part here was what I was specifically referring to: Quote Current Build: HM Sloop Echo 1781 (First Scratch Build) Previous Builds: HM Cutter Alert, Sharpie Schooner, Chesapeake Bay Flattie, Half-Hull (NRG)
Gremreeper1967 Posted April 10, 2020 Author #40 Posted April 10, 2020 9 hours ago, VTHokiEE said: This little part here was what I was specifically referring to: Not only did I forget that part but I didn't paint the rudder. I appreciate your pointing that out. Thank you greatly. VTHokiEE 1 Quote
Gremreeper1967 Posted April 12, 2020 Author #41 Posted April 12, 2020 Here's the latest on my build. Building the masts is right around the corner. Edwardkenway, GrandpaPhil and VTHokiEE 3 Quote
Gremreeper1967 Posted April 14, 2020 Author #43 Posted April 14, 2020 On 4/12/2020 at 6:09 PM, Snow said: Looking good Thank you sir. Quote
Gremreeper1967 Posted April 22, 2020 Author #44 Posted April 22, 2020 It's been a week or so since I have posted anything but I have been busy. All the masts, yards and booms are are built and mostly pre rigged with blocks for the running rigging. I still have a little bit of standing rigging to go but I'm waiting on blocks. And I am still looking for my next model. GrandpaPhil and Edwardkenway 2 Quote
Gremreeper1967 Posted May 12, 2020 Author #45 Posted May 12, 2020 I have started on the Rigging and moving along at a good pace. I am also getting things in place to start the Model Ship Ways Syren US Brig as soon as I'm done with this one VTHokiEE, GrandpaPhil and Edwardkenway 3 Quote
Gremreeper1967 Posted May 23, 2020 Author #46 Posted May 23, 2020 I have just a touch of rattling of the shrouds to do and rope coils left to do but I think I will wait on the coils until I find a suitable way to produce them. I have also started working on the US SIREN BRIG and I will have a lot more could to do then. Knocklouder, Edwardkenway, GrandpaPhil and 3 others 6 Quote
dmalcolm72 Posted August 5, 2020 #47 Posted August 5, 2020 I'm pretty new to this and am starting the rigging on the MS 18th Century Longboat. How are the instructions for this kit? Are they clear and understandable? Accurate? How about the drawings? What about quality of materials? Thanks for your incite. Quote Regards, Don "Unless you're out of air, it's NOT an emergency!" Current Build: "Lady Nelson" by Amati/Victory Models Current Build: "Polaris" by Occre Current Build: "Battle Station" A Navy Board Model (Scratch Build)
Jward Posted March 26, 2023 #48 Posted March 26, 2023 (edited) Good day to all, firstly i am pleased to find others who have built this kit as my progress so far has been slow and challenging, so your posts on this build is more than helpful so thankyou ! . Thought I'd share what I have managed so far... Edited March 26, 2023 by Jward Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.