Faux burl finish on base boards- How to make

[allanyed]

I have been following Druxey's build log on the 28 foot American cutter (which a fantastic log with lots of details) and he shows a faux burl finish on what will be the display base board for the model.   He recommended a specific book which I will likely get, but I found the following website video that gives step by step instructions on creating a burl finish on a plain piece of wood.  Nothing exotic or expensive is needed.

https://www.google.com/search?q=How+to+make+Faux+burl+finish+on+plywood&oq=How+to+make+Faux+burl+finish+on+plywood&aqs=edge..69i57.7636j0j1&sourceid=chrome&ie=UTF-8#kpvalbx=_LT3HYOiwI_CD_Qbap5HoCg15

 

Allan

[druxey]

Nice demo of this particular finish technique. As I only had a small area to do, I used artists' oil paint and thinners instead of stains. Otherwise I just used smaller brushes.

[TomShipModel]

Very good demo.  Thanks.

[Gregory]

On 6/14/2021 at 7:51 AM, allanyed said:

but I found the following website video that gives step by step instructions on creating a burl finish on a plain piece of wood.

Do you have a specific video in mind?

 

Your link takes me to a page with several.

[allanyed]

When I cut and paste the site in the post it comes right up on top and then just click on the arrow in the middle.

Hope this helps.

[Gregory]

The video at the top of your link is " How to faux burl wood-Artisan Rooms "

 

Is that the one.

 

If not, do you think you could click on the video , then paste the link here?