kurtvd19 Posted March 18, 2022 #1 Posted March 18, 2022 NRG VIRTUAL WORKSHOP SHARPENING SLITTING SAW BLADES FOR OPTIMAL WOOD CUTTING & PAINTING WATERLINES WITH MINIMAL MASKING Saturday, March 26, 2022 10:15 AM Central Time (11:15 AM Eastern, 9:15 AM Mountain & 8:15 Pacific) The NRG is inviting MEMBERS to a scheduled Zoom meeting. Topic: SHARPENING SAW BLADES & PAINTING WATERLINES Bob Filipowski will demonstrate and explain a way to sharpen slitting saw blades, so they cut wood better and easier. Your Preac saw is not underpowered if you sharpen your blades as Bob will show you. This technique will work for all saws using slitting blades. Kurt Van Dahm will show and explain how to paint waterlines with minimal masking and will provide masking tape tips to help you achieve a flawless waterline. PRE-REGISTRATION IS REQUIRED NRG MEMBERS - REPLY TO THE NRG OFFICE by 3-24-2022 – I will attend the March Workshop - with your name and email to nrghomeoffice@gmail.com There is some time before the workshop starts at 10:30 AM Central so everybody can get settled in. Please do not sign in before the start time shown. The workshop will be recorded so we ask all to observe the microphone muting requirements. Unmuted microphones can cause problems for the audience. Sorry, but if your microphone is unmuted and causing a disruption, we will have to drop you out of the meeting – when you rejoin be sure you are muted. Please note that we will ask for attendees to turn off their cameras and their microphones after joining the meeting. The speaker will explain when questions can be asked. When asking a question your microphone can be unmuted but please mute it again after asking your question. Registered members will be sent the required link to the ZOOM meeting on Friday, March 25, 2022. mtaylor and Chuck 2 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
kurtvd19 Posted March 27, 2022 Author #2 Posted March 27, 2022 Thank you to the 135 who showed up yesterday to the Virtual Workshop. Your attendance means a lot to the Guild and the speakers. The many questions during and following the presentations showed you were listening and coming up with well thought out questions. Some of the questions will a help in making some additions of information to address those questions in the future. Very satisfying to the speakers as they showed you were listening attentively. Take care, Kurt Ryland Craze, mtaylor and bruce d 2 1 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
bruce d Posted March 27, 2022 #3 Posted March 27, 2022 Thank you for a useful and thought-provoking presentation. mtaylor 1 Quote 🌻 STAY SAFE A model shipwright and an amateur historian are heads & tails of the same coin current builds: HMS Berwick 1775, 1/192 scratchbuild; a Slade 74 in the Navy Board style Mediator sloop, 1/48 - an 18th century transport scratchbuild French longboat - CAF - 1/48, on hold
robert952 Posted March 27, 2022 #4 Posted March 27, 2022 Excellent presentations. Kudos to the presenters for a job well done. I learned several items that I will use in the future. mtaylor 1 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?)
BobG Posted March 27, 2022 #5 Posted March 27, 2022 5 hours ago, kurtvd19 said: Thank you to the 135 who showed up yesterday to the Virtual Workshop. I was unable to attend this workshop, Kurt. Will it be available for viewing on the NRG website at some point in the near future for NRG members? mtaylor 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
kurtvd19 Posted March 28, 2022 Author #6 Posted March 28, 2022 Yes it will. We post all the Workshops for members. It will take a bit of time as we have one guy who can do the posting and he's real busy with his work right now. We will let members know when it is posted. robert952, BobG, mtaylor and 2 others 3 2 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
kurtvd19 Posted April 19, 2022 Author #7 Posted April 19, 2022 On 3/27/2022 at 6:43 PM, BobG said: I was unable to attend this workshop, Kurt. Will it be available for viewing on the NRG website at some point in the near future for NRG members? Bob: The videos are up on the website to view at your convenience. Kurt mtaylor and BobG 1 1 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
BobG Posted April 19, 2022 #8 Posted April 19, 2022 Thanks, Kurt. Much appreciated! mtaylor 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
JohnLea Posted April 22, 2022 #9 Posted April 22, 2022 I missed the Half Hull seminar. Was that recorded? robert952 1 Quote The closer you get to Canada, the more things will eat your horses. ~ T. King
kurtvd19 Posted April 22, 2022 Author #10 Posted April 22, 2022 We have not done a Workshop on the Half Hull. We are discussing possibly doing one or doing up a frequently asked questions about the kit and posting the FAQs in our resources section - with updates when somebody asks a new question. All the Workshops we have done are available on the website. You must sign in to access them. Kurt mtaylor and robert952 1 1 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
JohnLea Posted April 22, 2022 #11 Posted April 22, 2022 So I am not an old man who can't find things on the internet. I am just an old man who creates his own reality. I could have sworn there had been one. BobG, mtaylor and robert952 1 2 Quote The closer you get to Canada, the more things will eat your horses. ~ T. King
kurtvd19 Posted April 23, 2022 Author #12 Posted April 23, 2022 I am in charge of this program for the NRG and I had to call Toni to see if we had done one after you asked your question. So consider yourself less gone than I am! mtaylor, BobG and robert952 2 1 Quote Kurt Van Dahm Director NAUTICAL RESEARCH GUILD www.thenrg.org SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS CLUBS Nautical Research & Model Ship Society of Chicago Midwest Model Shipwrights North Shore Deadeyes The Society of Model Shipwrights Butch O'Hare - IPMS
robert952 Posted April 23, 2022 #13 Posted April 23, 2022 John, I always use the Adam Savage (Mythbusters TV show) approach. "I reject your reality and substitute my own." (Like today, I remember I bought some door stops. But it must have been a different reality as I can't find them in this one.) mtaylor, JohnLea and CDR_Ret 2 1 Quote ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Robert Chenoweth Current Build: Maine Peapod; Midwest Models; 1/14 scale. In the research department: Nothing at this time. Completed models (Links to galleries): Monitor and Merrimack; Metal Earth; 1:370 and 1:390 respectively. (Link to Build Log.) Shrimp Boat; Lindbergh; 1/60 scale (as commission for my brother - a tribute to a friend of his) North Carolina Shad Boat; half hull lift; scratch built. Scale: (I forgot). Done at a class at the NC Maritime Museum. Dinghy; Midwest Models; 1/12 scale (Does LEGO Ship in a Bottle count?)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.