HMS Winchelsea 1764 by svein erik

[svein erik]

Hello.. am starting  the buildlog... and fore know am waiting fore the plans,

then i need some wood 😉

 

svein.erik

[svein erik]

hi, so am planing to start this projekt before the winter (3-4mnd) i need to finished the pequot ship first....

but am starting to get wat i need for the first 3-4 chapter at start ,

my question ? is there a wood list ? to ripp the planks myself or do i have to by the wood finished ripped?

 

 

svein.erik

[scrubbyj427]

You can rip as you go or buy the completed wood package . I just cut my wood as I needed it. Chuck outlines pretty clearly what thickness you will need, If you’re cutting your own.

http://www.modelerssawmill.com/wood-packages.php

[svein erik]

hi ,again☺ know my joureny begins .... after waiting for this build to start ,

i have order the 1/4 laser cut bulkhead set from Chuck , but i do have to wat for it.....😲

so ... am desided to plank the hull with boxwood and am also using the ayc for the dekk planking and many other parts 

because there are many parts thats  is painted , so fore this am using the ayc kits from Chuck.

 

As i can see, Modeler's sawmill do not ship to Norway/Euro. so i have to get it from Hobbymill.EU

thats means the sheets is in metric so i have to cut it twice to make it to inch... 

example: 1/4 (6.35 mm) for this i need 7mm sheet  then cut it down .. thats Europe...😉

there wil be some photos later lol...

 

svein-erik

 

[scrubbyj427]

17 hours ago, svein erik said:

hi ,again☺ know my joureny begins .... after waiting for this build to start ,

i have order the 1/4 laser cut bulkhead set from Chuck , but i do have to wat for it.....😲

so ... am desided to plank the hull with boxwood and am also using the ayc for the dekk planking and many other parts 

because there are many parts thats  is painted , so fore this am using the ayc kits from Chuck.

 

As i can see, Modeler's sawmill do not ship to Norway/Euro. so i have to get it from Hobbymill.EU

thats means the sheets is in metric so i have to cut it twice to make it to inch... 

example: 1/4 (6.35 mm) for this i need 7mm sheet  then cut it down .. thats Europe...😉

there wil be some photos later lol...

 

svein-erik

 

Will hobbymill mill the wood to your desired thickness? I would inquire to see if they also offer a lumber package for the Winchelsea. I believe the owner of hobbymill.eu is also a MSW member. 

[Chuck]

Yes they do...they will be able to mill to the sizes you need.

[svein erik]

18 minutes ago, scrubbyj427 said:

Will hobbymill mill the wood to your desired thickness? I would inquire to see if they also offer a lumber package for the Winchelsea. I believe the owner of hobbymill.eu is also a MSW member. 

yes  thee is a lumber package all milled ready to go, but the price is 314 euro for ayc and about 385 euro for boxwood +shipment and tax

if i get the sheets and mill my self the cost is about 90-100 euro ☺☺

[svein erik]

17 minutes ago, Chuck said:

Yes they do...they will be able to mill to the sizes you need.

thanks i wil send them a mail.

i have not used hobbymill before and i hope the boxwood is a good as when i got it from syren ☺

[Edwardkenway]

9I received some boxwood from Hobbymill EU 

I've found it to be excellent 

along with Vahur customer services. 

Hope this helps with your choice!

[svein erik]

hi, so wat did i recive today...😲 know i can see its a big monster...

 

svein-erik