HMS Victory by Yabuhebi (Chris) - Caldercraft - 1:72

[Yabuhebi]

Today I did just that. I took them all off, I was worried they would break, but I got lucky.

I sanded them and then painted everything. I also went back over things with a very fine paint brush to clean up the margins.

 

I also took a piece of .5x3mm walnut and split it in half, sanded in smooth and painted one side blue. I decided I would glue this to the vertical rails.

 

I can still some some touch up needs here and there which I will address...especially some of the lower spots that I don't see from my chair.

 

Is it perfect, not even close, but it is much better than 24 hours ago, so I can sleep easier tonight.

[Yabuhebi]

While doing all that, there was a lot of waiting time for things to dry so I continued to work on the cannons.

 

There are 6 cannons that will be below the poop deck, I decided that these 6 will be minimally constructed. Just the bare carriages with enough to keep the cannons in place. I chose the 6 worst carriages and cannons for them.

 

2 or 3 of the breeching rings of the cannons fell off, so I used them. Another note: the earlier instructions mention that the hole in the cannon to hold the trunnion (brass wire) are off center, that means there will be a low or high spot and they needed to be mounted so the trunnion/brass axle needs to be low.

 

I had to drill out the holes on all the wheels. After painting the axles before installation, I added too much diameter, but I didn't want to have to touch up the axle ends with black paint after installing the wheels....too sloppy. Most of the wheels fit in nicely, a few didn't but I didn't want to force anything and break them.

 

There is also a piece, the quoin (#163) that is at the back of the cannon bed to help elevate the cannon. These are very crumbly pieces. Most disintegrated with handling. It's the wood grain, no matter which way they're made, they are subject to damage.

 

I didn't bother butting the trunnion covers on the 6 under the poop deck and glued them in place. I will continue to work on the others!

[Yabuhebi]

To wrap up the day, I started working on the catheads. I have 4mm wooden sheaves and they installed nicely into the assembly. 

I have to research how all the brackets attach and will work on them this week.

 

I also added the poop deck. I thought there would be more side walling for this deck, but I see that the mattress hammocks must do that work for the ship.

I planked one side only. I did it that way so I wouldn't lose the pattern and would be able to cut out the mast hole and hatch opening.

 

Been a busy weekend!

 

Thanks for ALL the likes, it's nice that people would stop by to look at (or even read!!!) my posts!

Very humbling!

Chris

 

[PUNISHERMARKO]

Hey Yabuhebi,

I never posted or commented here before, but just would like to make nice comment.
I especially love your posts as you are just bit ahead of me, which always gives me new ideas on how to do things in future.
I purchased my HMS Victory in April 2024 and I am currently on page 21 Quarterdeck fixings working on it roughly 7 hours every day, but I am enjoying it.
Prior to that I finished 5 large scale ships.
But anyway, I love your posts, keep up great work 🙂

[Yabuhebi]

9 hours ago, PUNISHERMARKO said:

Hey Yabuhebi,

I never posted or commented here before, but just would like to make nice comment.
I especially love your posts as you are just bit ahead of me, which always gives me new ideas on how to do things in future.
I purchased my HMS Victory in April 2024 and I am currently on page 21 Quarterdeck fixings working on it roughly 7 hours every day, but I am enjoying it.
Prior to that I finished 5 large scale ships.
But anyway, I love your posts, keep up great work 🙂

I appreciate your post!

 

April and already at the quarterdeck!!! That's moving!

 

I'm working on the bow and poop deck right now, the instructions are so vague at times. You'd think they would have revamped them in the last 21 years since the version we're looking at! If it's the cost to add more paper I get it, then perhaps a supplement of pictures on their website.

 

The only other model I've done is Trumpeter's 1:200 scale Titanic. It's a huge 48" model with TONS of PE parts. It's funny, their directions have absolutely no words in them! Just numbered pictures of what goes where and how pieces fit together. I think that would be helpful.

 

I spent 15 minutes this morning trying to figure out what they meant when explaining how to install the pillars for the marine walk. Once I came upstairs and looked at all the pictures of builds and live shots I keep on my harddrive, it made sense. But the words!!!!! LOL...

 

Thanks again and at some point you're going to catch up!!!!

Chris

 

[PUNISHERMARKO]

I do agree that most of the time instructions are very clear, but I did come across something very recently put this in there. No mention about drawing or any pictures or references. I did same as you either look at the picture from the box which I still have or look at the pictures from the real thing.

But from all the ships mentioned below, this one has the best instructions and drawings.

I started building these beautiful boats in 2020 and since then I finished in correct order Occre: HMS terror, santisima trinidad, montanes, prinz eugen, and from Mantua - Sovereign of seas [ my favourite ] and now working on caldercraft-hms victory and hoping I can finish by summer and start on second hms victory from caldercraft.

I am still new to this forums, so not sure if I am allowed to put 1 picture of my hms victory on here.
Thank you and keep up good work Chris

[Yabuhebi]

15 hours ago, PUNISHERMARKO said:

I do agree that most of the time instructions are very clear, but I did come across something very recently put this in there. No mention about drawing or any pictures or references. I did same as you either look at the picture from the box which I still have or look at the pictures from the real thing.

But from all the ships mentioned below, this one has the best instructions and drawings.

I started building these beautiful boats in 2020 and since then I finished in correct order Occre: HMS terror, santisima trinidad, montanes, prinz eugen, and from Mantua - Sovereign of seas [ my favourite ] and now working on caldercraft-hms victory and hoping I can finish by summer and start on second hms victory from caldercraft.

I am still new to this forums, so not sure if I am allowed to put 1 picture of my hms victory on here.
Thank you and keep up good work Chris

You can absolutely post any pictures you'd like here. I believe any builder log would encourage any pictures on their page.

 

4 years and 6 boats under your belt! That's some skill building and now that I think of it....don't put any pictures of your build on my page, I don't want to start crying!!!!!!

 

Looks like you prefer Occre...

[PUNISHERMARKO]

2 hours ago, Yabuhebi said:

You can absolutely post any pictures you'd like here. I believe any builder log would encourage any pictures on their page.

 

4 years and 6 boats under your belt! That's some skill building and now that I think of it....don't put any pictures of your build on my page, I don't want to start crying!!!!!!

 

Looks like you prefer Occre...

Yeah, no. I wouldn't recommend occre to my worst enemy, but thats how I started this hobby.
During summer I try to work on ships for 12 hours a day, wake up super early and work till 9pm sometimes.
There is way too much wrong with occre for ridiculous price. I also did buy their latest HMS Victory in 2023 I believe, once again for absolutely ridiculous price with intention to return it. Cheap materials, bad drawings, lots of missing parts, bad manual and fancy packaging. Occre got me started, but soon I realized that there are far better models for similar price. And every single model had lots of parts missing and when I requested parts it took over 2 weeks to arrive.
Their latest USS Missouri is literal copy of Prinz Eugen for double the price. Occre in 2020 was actually ok. Low ish quality models for fair price, but now, its even lower quality models for ridiculous price.
I attached couple of pictures of my progress on Victory. The writing on the stand is design and 3d printed by me. Maybe once everything is finished I will try to 3d print some very nice looking stand, but this one is really good and strong.
That's the thing with occre, stand is easier very flimsy or most of the time they dont include stand and you have to spend extra £££ to have stand...
 

[Yabuhebi]

9 hours ago, PUNISHERMARKO said:

Yeah, no. I wouldn't recommend occre to my worst enemy, but thats how I started this hobby.
During summer I try to work on ships for 12 hours a day, wake up super early and work till 9pm sometimes.
There is way too much wrong with occre for ridiculous price. I also did buy their latest HMS Victory in 2023 I believe, once again for absolutely ridiculous price with intention to return it. Cheap materials, bad drawings, lots of missing parts, bad manual and fancy packaging. Occre got me started, but soon I realized that there are far better models for similar price. And every single model had lots of parts missing and when I requested parts it took over 2 weeks to arrive.
Their latest USS Missouri is literal copy of Prinz Eugen for double the price. Occre in 2020 was actually ok. Low ish quality models for fair price, but now, its even lower quality models for ridiculous price.
I attached couple of pictures of my progress on Victory. The writing on the stand is design and 3d printed by me. Maybe once everything is finished I will try to 3d print some very nice looking stand, but this one is really good and strong.
That's the thing with occre, stand is easier very flimsy or most of the time they dont include stand and you have to spend extra £££ to have stand...
 

 

 

 

Your work up to now is looking great. I just love when paint lines come out crisp and clean....just something perfect about that!

 

I see you added caulking to the lower deck...I saw one builder lay string in between each plank to create the caulking. Looks good, but man that's a lot of work!

 

I live in upstate NY, which is in the NE of the USA right on one of the Great Lakes. I spend our summers (April - October) sailing or hanging by the Lake. She's put away for the winter so I've started getting back into the model since last April....well at least until all the leaves fall and I spend a week doing that!

 

I think right now I can spend about 5-6 hours during the day and then I go back down around 10pm for an hour or two. 

 

I figure I'm about 2/3's of the way through the hull instructions. I have to finish the poop deck and then tackle the stern. This are, like the bow is certainly going to be a challenge!

[Yabuhebi]

My work on the poop deck may have been a little overboard.

 

I was concerned that I might not have seated the poop deck template low enough on the bulwarks. It seemed to fit, but in retrospect, there may have been a millimeter or two that I could have 'found'.

 

The instructions call for adding a piece of scrap 1.5mm to the inside bulwark to flesh it out a bit, then add the requisite planking to match all the other interior bulwarks. But since I had little if any actual depth at the end of the poop deck (where it drops off back down to the quarterdeck) I though I needed to just a add a little bit.

 

The actual bulwark from outside to inside consists of: the walnut 2nd planking (painted black), the plywood gunport template, the scrap piece just added.

 

So I added another piece to the middle of this sandwich. I added about 3-4mm to the stern of the poop deck and tapered it down to about 1mm. On the outside, I added another piece of 2nd planking walnut to bring the hull up a bit and then when it was done, I added the interior planking.

 

This actually gave me a nice base for the capping (#390). 

 

The work looked pretty bad, but once it dried and I was able to send it down and cap it, I think it looks fine. Hopefully I haven't created height issues later in the build!

 

Once done, I added some stained wood filler to the deck, let it dry and then sanded it smooth. After adding 1 coat of matt finish, I was pretty happy with the look of the deck. 

 

I've checked ahead and wonder if the back of the stern facia should be planked. I'm going through other build pics, but it looks like the flag locker does a good job of covering this completely (I say this because I just started working on assembling these little buggers)

 

I also added a walnut cap in front of the poop deck. It's a bit off and needs to be sanded better and some filler added.

I removed the copper smoke stack from the binnacle so I wouldn't whack it while sanding.

 

Edited November 13 by Yabuhebi

[Yabuhebi]

I think that it is the close up pictures that give me the jitters. At this scale, the amplify so many errors or inconsistencies. 

 

Perhaps I will only take and post long distance shots from now on...or maybe pics with some nice mellow coloring, add some gauze effects to obscure things!!!

 

I finished the catheads, sanded the base and had to trim away a bit of the exterior hull on the starboard side to get it to fit. I still have to add the blue trim, but can do that on the hull where it's easier and steadier.

 

After painting and adding black highlighting to the bow main rail (#394). The plans call for this rail to essentially fit tight against the main inner timberhead on the quarterdeck (#125) and then kind of tack glued to the bow rails and stem. I think if you look at more detailed plans there is an actual rail or timber that this rail would secure to.

 

Either way, I glue and clamped the rail to the timberhead and the fit it to the stem (a little trimming was required). I used white glue for this and then tacked the inside against the bow rails with CA glue. I still have to shape the top of this main rail to fit into the timberhead seamlessly and I have to paint the top black. There is a little touch up I need to do...again and again and again.

 

I added the knightheads after adding a piece of scrap dowel to simulate the bowsprit. 

After, I added the marine walk and support pillars.

 

I have the boomkins, but I will add them when I begin adding the various masts. 

 

So, believe it or not. I think that is a wrap on the bow until I add the bowsprit and begin rigging.

 

Oh...I have to add 4 doors, 2 fake ones and 2 smaller gun ports that have side by side doors....so I guess I'm not done.

[PUNISHERMARKO]

8 hours ago, Yabuhebi said:

 

Your work up to now is looking great. I just love when paint lines come out crisp and clean....just something perfect about that!

 

I see you added caulking to the lower deck...I saw one builder lay string in between each plank to create the caulking. Looks good, but man that's a lot of work!

 

I live in upstate NY, which is in the NE of the USA right on one of the Great Lakes. I spend our summers (April - October) sailing or hanging by the Lake. She's put away for the winter so I've started getting back into the model since last April....well at least until all the leaves fall and I spend a week doing that!

 

I think right now I can spend about 5-6 hours during the day and then I go back down around 10pm for an hour or two. 

 

I figure I'm about 2/3's of the way through the hull instructions. I have to finish the poop deck and then tackle the stern. This are, like the bow is certainly going to be a challenge!

I asked my wife whether she prefers deck planking with caulking or without and she said without. That's why I did quarter deck planking without. But yeah like you said I've seen people doing with string and that's crazy amount of work, especially planking the hull and using string.
Your sailing hobby makes me jealous. I am trying to do as much as I can now because in December Christmas tree will come out and ship will have to be put away for a month, unless we don't have tree and I will be able to continue.
While ago I made mistake which is kind of funny. When I was working on galleries, on each window there is that little cut out for the brass later on in the build. I didn't check, I just assumed that that little cut out is for the "glass" so I spent hours cutting out that little clear plastic into each window when i just could have cut out big rectangular piece and stick it on. So they are inside out and lesson learnt "never assume".
Second mistake which I will definitely do on second hms victory is I didn't do lights and I am kicking myself for it.
And just wanted to show what I used to do canon rigging. I 3d printed myself little jig and do all rigging on there and once done, just transfer everything to ship.
And lastly the platform around bow sprit looks very well.

[Yabuhebi]

6 hours ago, PUNISHERMARKO said:

I asked my wife whether she prefers deck planking with caulking or without and she said without. That's why I did quarter deck planking without. But yeah like you said I've seen people doing with string and that's crazy amount of work, especially planking the hull and using string.
Your sailing hobby makes me jealous. I am trying to do as much as I can now because in December Christmas tree will come out and ship will have to be put away for a month, unless we don't have tree and I will be able to continue.
While ago I made mistake which is kind of funny. When I was working on galleries, on each window there is that little cut out for the brass later on in the build. I didn't check, I just assumed that that little cut out is for the "glass" so I spent hours cutting out that little clear plastic into each window when i just could have cut out big rectangular piece and stick it on. So they are inside out and lesson learnt "never assume".
Second mistake which I will definitely do on second hms victory is I didn't do lights and I am kicking myself for it.
And just wanted to show what I used to do canon rigging. I 3d printed myself little jig and do all rigging on there and once done, just transfer everything to ship.
And lastly the platform around bow sprit looks very well.

 

 

 

Making jigs is a great idea. I thought about lights, but they are a HUGE extra hurdle. I did them on my Titanic model. It was hours of creating mini light groups that didn't overwhelm the amp tolerance of the lights, getting them all soldered together correctly and making sure they worked from deck to deck.

 

When it was done and glued beyond salvaging, I had some issues with one side of the model not quite lighting up as much as I wanted. I had bought one of those adjustable DC power supplies to test lights prior to moving on.

 

It was a quite a project and I am glad I did it. But I knew that trying to add lights to this model when I had NEVER worked on a wooden model or something of this scale or difficulty would only add a level of frustration that I didn't want to face.

 

Thanks!

Chris

 

 

[PUNISHERMARKO]

1 hour ago, Yabuhebi said:

 

Making jigs is a great idea. I thought about lights, but they are a HUGE extra hurdle. I did them on my Titanic model. It was hours of creating mini light groups that didn't overwhelm the amp tolerance of the lights, getting them all soldered together correctly and making sure they worked from deck to deck.

 

When it was done and glued beyond salvaging, I had some issues with one side of the model not quite lighting up as much as I wanted. I had bought one of those adjustable DC power supplies to test lights prior to moving on.

 

It was a quite a project and I am glad I did it. But I knew that trying to add lights to this model when I had NEVER worked on a wooden model or something of this scale or difficulty would only add a level of frustration that I didn't want to face.

 

Thanks!

Chris

 

 

Those lights look amazing, great work. I have never done lights before, this is first model I really wanted to do lights and I keep looking at my options for next model. trying to keep it simple and was looking at ARGB strips like 5-10 metres and then cut it at the points and solder cables on the connections. But someone recently mentioned Christmas tree lights and actually that is really good idea, not gonna lie. I think to keep it very simple I might get Christmas lights for next victory. Gonna be hassle to keep pulling whole 4 metre cable through holes, but it's simple and it will look good and there are many shapes of bulbs. But your Titanic looks really good 🙂

[Yabuhebi]

6 hours ago, PUNISHERMARKO said:

Those lights look amazing, great work. I have never done lights before, this is first model I really wanted to do lights and I keep looking at my options for next model. trying to keep it simple and was looking at ARGB strips like 5-10 metres and then cut it at the points and solder cables on the connections. But someone recently mentioned Christmas tree lights and actually that is really good idea, not gonna lie. I think to keep it very simple I might get Christmas lights for next victory. Gonna be hassle to keep pulling whole 4 metre cable through holes, but it's simple and it will look good and there are many shapes of bulbs. But your Titanic looks really good 🙂

 

I don't think you'd like christmas lights. Even small ones are huge. At the very least, you could look at LED light strips and/or little nano lights. The problem with nano lights is you need resistors to keep them from burning out as they can only take 1.5volts or so. The resistors will allow you to use a 12v power supply.

 

That was the killer for me. I could only attach 4 nano lights to a resistor and keep them from burning out. More than 5 and 12v wouldn't light them, 3 an and they were too bright.

 

LED light strips on the ceiling of the upper deck would light up all the work that gets done on the cannons, stairs, etc. Then adding strategic nano lights in stern to light the stern quarter galleries and up front so light shines through the beak head would be great. The nice thing about LED strips, you can stick whatever you need, say 10" to an area, then add a snap on connector to go to the next strip in an other area and hide the wires up in the rafters...so to speak.

 

Then add a few nano lights to the Admiral's quarters behind the screen, one in the binnacle and if you can figure the wiring, 3 for the stern lanterns.

 

I know you can get nano lights that flicker or get the required material to make them flicker. Then you could follow some of the builder logs and create little mini lanterns lit by those nano lights.

 

I think I paid like $17USD for 50 nano lights (come with resistors), $18 for 16' of LED light strips. I did have to buy a solder kit and various wiring and connectors to connect everything. 

 

It's doable...lol.

[Yabuhebi]

I didn't have any pics on my laptop, I must have moved them off to save space.

The boat had about 4' of light strips in the bottom of the boat and then light strips under the C, B and A decks (A deck is just below the open deck where people walk) Plus almost 100 nano LED lights all over the place. The task was to keep all of it under 12volts and 3 amps or so....

[PUNISHERMARKO]

8 hours ago, Yabuhebi said:

I didn't have any pics on my laptop, I must have moved them off to save space.

The boat had about 4' of light strips in the bottom of the boat and then light strips under the C, B and A decks (A deck is just below the open deck where people walk) Plus almost 100 nano LED lights all over the place. The task was to keep all of it under 12volts and 3 amps or so....

all that hard work with the lights definitely paid off as it does look amazing. Lights coming through every single window and on the deck, it looks really good🙂

[Yabuhebi]

Worked on the various poop deck pieces. 

 

The flag lockers are a bit of a pain. I suppose I could have used masking tape to 'tie' them together as I glued them. Ultimately, the cabinet part came out fine.

 

The parts manual has a full size silhouette of the shelve pieces. I laid the cut pieces onto the manual and then followed the blue prints to make them. They fit pretty tight and I didn't even bother gluing them. The shelf in the blueprint is for one side, you'll have to reverse them to make the other side..

 

I painted the cabinet with a few coats and then slid the shelving in, again didn't need glue as it fit snug. I did notice that the 2 pieces don't quite sit flush with the stern and I am not sure if they are supposed to or not. I sanded them as much as I could and then fit them in place. There are 2 small pieces that fit on top of the lockers to mock the extension of the knees. Trying to get them off the sprue sheets was impossible, they are too small and thick and kept breaking. I finally just took some scrap and sanded them on my bench sander as best as I could.

 

The skylight just flat out sucks. The shell is fine enough. When it was done, I dipped it in walnut stain to give it a richer color. I spent some time cleaning out the grooves for the window frames.

 

I cut the top frames and the shorter side frames off their sprue, placed them on double sided tape and applied Mr. Metal to etch them.

The next day, I started painting them with a brush. I have a good airbrush, but I haven't used it in 5 months or so and just didn't want to face breaking it down and getting it ready. I SHOULD HAVE.

 

The frames frankly look like ****. I tried to remove as much excess paint as I could...even using my tweezers to squeeze the sides to get rid of paint.

The larger side frames looked a little better, but the top ones...

 

I airbrushed the long side frames and they came out 100% better and that is what I'll be doing from now on with all the PE. The only negative is that painting them on the sprue makes it harder to get rid of the excess with a file or cutter.

 

You can see the difference between the top and side and my guess is at some point I am going to remove the skylight, take the frames off, soak them in turpentine and redo them again.

 

The next task were the 2 stairs from the poop deck to the quarterdeck. 

 

There is a mid platform and I opted to add decking to give it some detail. I also used the thinner deck planks for the stair treads instead of the walnut that is asked for. Even sanding the edges of the walnut make it difficult to get the stairs together. The deck planks work very good in my opinion. Once I had the treads in place, I added some watered down white glue to make sure they would hold.

 

I knew it was going to cause and issue, because intent was to dip the stairs in walnut stain so they would match, but the glue keeps that from happening, but it was the best I could do. 

 

After, the directions call for the platforms, stairs and 2 additional steps to be put together and glued under the poop deck. The issue I encountered is that there is a crown to the poop deck. The first attempt and I could see that the platforms were tilted. I tried sanding the steps that go from the poop deck to the platform at an angle to counteract the crown. It helped. Ultimately, there is a bit of a gap, but they are fairly straight.

 

I tried my best to make the wooden inside stair rails, I soaked some strips for a day or two and tried to heat them but couldn't get the short angles without the wood breaking. I ended up cutting pieces and reglueing them. They look ok and I've painted them black to hide the assembly work.

 

I finished the day working on the poop deck barricade. Cutting the little 3x4mm pieces to create the base of the barricade is tough, my cutter tends to drift and the pieces come out with a bit of a taper to them. At 5mm in length, it's hard to sand them square. I was able to glue the little pieces to the poop deck rail (#388) but I COULD NOT get that stupid piece to glue to poop deck shear piece. The crown caused issues and I couldn't get any clamps around the barricade and the underside of the poop deck. Using white glue wouldn't work as it sets too slow.

 

I tried using CA glue and for some reason it just wasn't setting. I gave up and will try again tomorrow. 

 

I bought some decal paper that might allow me to print the HMS Victory logos on the pails, but looking at the pails in the kit...they're like 1-2mm wide. I don't see it, but I will give it a shot and let you know!!!

 

As I look at the pics, I may paint the stairs black too, I'll pretend there was major damage during a battle and the only replacements were already painted.....

 

Edited November 15 by Yabuhebi

[Yabuhebi]

I was finally able to secure the poop deck barricade down using smaller clamps without their feet attached. This allowed them to grab the top rail and underside of the poop deck. Once painted along with the stair rails, things were looking ok.

 

....except for that skylight

[Yabuhebi]

I saw Robert29's take on creating rings for the fire buckets. I put a toothpick in some scrap wood and pushed a brass barrel on top.

 

I was able to wrap thin PE sprue around the base and use CA glue to attach. I plan on putting the glued edge to the back so they aren't visible.

 

I also bought some Waterslide decal paper to see if I can make little decals. No big deal if that doesn't work.

 

This is tedious work and I do 3-4 a day in between other...'funner' things.

[Yabuhebi]

I wanted to take a stab at painting the cast metal to see what I'm facing.

 

I figured I would paint the broad base colors and slower and lightly add layer after layer.

 

I noticed the starboard cherub's cape is a lighter blue than I have. I mixed some white and the kit blue. They only issue will be when adding the 2nd or 3rd coat because it won't match.

 

I did make an error when installing the stem bow curved rails. The directions specifically remind you to leave room for these castings. I didn't catch that warning and my rails are too close. I'll have to adjust these pieces to fit over one of the rails as I am not going to remove them from the stem....they are committed to their positions and would affect too many other pieces in that area.

[Yabuhebi]

Working on both the stern and side galleries.

 

The stern gallery required some work. I glued glazing to the inside of the exterior facia (#375). I then glued this to the internal facia that is already on the stern(#374).

 

After, I painted it black and after it dried I taped off the areas around the window to paint them yellow and create the black banding in between frames.

 

I have seen other builders add depth to the side galleries. I added some .5x3mm and .5x4mm walnut around the window frames. The balusters will fit over them so I will see how that works.

 

I also added 1mm wide styrene painted black for the striping on the balusters. 

 

Once the wood putty dries, I can begin putting the frames and balusters on. I also added the facia capping after soaking them in water to get the proper bend.

[Bob Fraser]

4 hours ago, Yabuhebi said:

I saw Robert29's take on creating rings for the fire buckets. I put a toothpick in some scrap wood and pushed a brass barrel on top.

 

I was able to wrap thin PE sprue around the base and use CA glue to attach.

Scrap PE fret comes in handy.  I've used it as hoops on barrels, smokestacks and capstan tops to simulate the iron metalwork.

I've also seen, for thinner strips and iron woolding bands, people use the soft lead tops off sprits bottles.  Cuts bends and shapes easier than brass!