Jump to content

Recommended Posts

Hi,

 

I started Heller Soleil Royal 20 years ago when I was a student after that came kids and all and didn't have time to finish it. I think that I painted some gold decorations and cannons and now I would like to "restart" it.

 

I was wondering how to remove the paint without causing any damage to plastic? I used Tamiya paints. I remember the bottles looked the same as what they sell now (Acrylic) but I'm not sure if the paint was the same back then. I'm not 100% sure but I think that back then there was something in the Tamiya paint that wasn't ok with EU regulations or something.

Link to comment
Share on other sites

If they are their acrylic type, Tamiya paints can be removed by alcohol (IPA). I have done it several times in the past. Alcohol does not affect polystyrene plastic. Otherwise, I also used Mr Color Leveling Thinner. Please make a test on a small part first.

Good luck,

Dan

Current build : Mayflower - AL 1:64Lady Nelson - Amati Victory 1:64

Completed non-ship builds : Spitfire MK I - 1:48Arado 196B - 1:32, Sea Fury - 1:48F-15C Eagle - 1:48Hawker Tempest Mk.V - 1:48F104S Starfighter - 1:48

 

"The most effective way to do it, is to do it" - Amelia Earhart

Link to comment
Share on other sites

  I Googled 'how to remove acrylic paint',  and a result was that denatured alcohol (methanol) will work better than 90% isopropanol (IPA or 'rubbing' alcohol) ... note that 70% and even 50% is also sold as the watered down version is less irritating to skin.  My admirable Admiral was pulling her hair out trying to remove dry acrylic from a formed plastic mixing tray used for a project, as she was only using soap and water.

  

  I applied some hardware-store methanol on a paper towel and SHAZAAM, much of the residue came off - only the thickest and oldest blobs remained.  So pouring some denatured in the pockets of the tray to let them soak (plus a little prying later with a dull 'dinner' knife), and most of that came off.  I left the clean tray, soiled paper towel and the can of methanol out on the counter to give her a pleasant surprise for her later when she comes down form the sewing room.

 

  I suppose you could soak the parts in a deep tray of denatured alcohol if they don't come cleaner with IPA (the first recommendation of the Google search).  It is possible that 20 year old paint may not be removable ... so in that case, you can paint over the parts where needed.

Completed builds:  Khufu Solar Barge - 1:72 Woody Joe

Current project(s): Gorch Fock restoration 1:100, Billing Wasa (bust) - 1:100 Billings, Great Harry (bust) 1:88 ex. Sergal 1:65

 

 

 

Link to comment
Share on other sites

  Perhaps its the ammonia (among other ingredients) in the Windex that do the job.

Completed builds:  Khufu Solar Barge - 1:72 Woody Joe

Current project(s): Gorch Fock restoration 1:100, Billing Wasa (bust) - 1:100 Billings, Great Harry (bust) 1:88 ex. Sergal 1:65

 

 

 

Link to comment
Share on other sites

Fifteen to twenty years ago I used Easy-Off oven cleaner to remove paint from a collection of plastic ships. I put each ship model in a zip lock bag (they were small!) and spray liberally with the oven cleaner. Twenty-Four hours later the paint simply slid off the plastic models. A toothbrush took care of the rest. The plastic seems healthy to this day. More than I can say about Easy-Off. I think it's been changed considerably.

Link to comment
Share on other sites

Experiment first in an inconspicuous place on the model or a separate piece of similar plastic. Some paint removers will melt plastic and distort the surface.

 

Some paint removers use ethylene glycol (brake fluid).

Phil

 

Current build: USS Cape MSI-2

Current build: Albatros topsail schooner

Previous build: USS Oklahoma City CLG-5 CAD model

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...