Rick Abramson Posted November 8 #1 Posted November 8 After a joint effort between John Elwood who began the Portland in 2016 and myself, who took over where John left off, the Portland is finally complete. I would never want to tackle anything like this again! Now awaiting the plexiglass cover. The second photo is before I stained the base. Ryland Craze, schooner, SiriusVoyager and 6 others 9 Quote
Rick Abramson Posted November 8 Author #2 Posted November 8 An additional note; the paper flags proved to be too heavy resulting in the flags flying in different directions. . .not good! I had decals made from the paper decals, they worked perfectly! Not only are they lighter than the paper ones, after installing the flag halyards with black thread, I then gave the thread a thin coating of ACC which stiffened the thread preventing it from twisting. Ryland Craze 1 Quote
ccoyle Posted November 8 #3 Posted November 8 Beautiful model, Rick! I have split your posts into a separate topic to avoid the misconception that this model is the same model as in the other build log. Cheers! Ryland Craze 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
SiriusVoyager Posted November 8 #4 Posted November 8 Very nice model! Ryland Craze 1 Quote - Eric Drafting: Sultan Arab Dhow Finished: Norwegian Sailing Pram, Lowell Grand Banks Dory, Muscongus bay lobster smack, OcCre Palamos, San Francisco Cross Section
Nunnehi (Don) Posted November 9 #5 Posted November 9 Nicely done! Have been looking at it for a while and may have to place an order. Don Quote
Rick Abramson Posted November 9 Author #6 Posted November 9 (edited) Chris, Eric and Don, thank you for your kind comments, much appreciated!! This "kit" is certainly not for the "feint of heart." It is basically a "scratch-building kit." Except for the Portland, I build usually in plastic. I attached some shots of my plastic builds., Top to bottom: QE2, QM2, USS Olympia, details on USS Arizona. The bridge and fighting tops on the Arizona are all photo etched parts. Edited November 9 by Rick Abramson Quote
Rick Abramson Posted November 9 Author #7 Posted November 9 This is the original ITC model of the USS Oregon from 1959. Original price was $2.98!! I built this in 1977. I made all of the railings. The model was re-released by Glencoe Models. It does appear frequently on ebay. . .a bit more $$$ than $2.98. PaddyO 1 Quote
Rick Abramson Posted November 13 Author #8 Posted November 13 As info, that "I" beam like structure from the bridge to the bow was a removable support for a canvas cover to provide shade. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.