HMS Victory cross-section by Russ2025 - Artesania Latina - 1:72

[Russ2025]

Hey everyone, I have been working away at this cross-section as a retirement project. My previous experience with model making goes back to plastic models as a much younger version of myself. 
Kind of just feeling my way through this project and realizing the learning curve is steep. I have made a few critical errors, one that is noticeable if viewed from the top, and the other being putting the heavier guns on the highest gun deck. Once I noticed the mistake it was too late to rectify the error but a lesson learned. 
Any feedback or suggestions would be welcomed. 
 

Cheers, 

Russ

[Russ2025]

A cool morning here in the Maritimes so started to paint the hull. 
I am using Artesania paints and find the hull colour quite thick. Does anyone have advice on thinning these paints, is it necessary etc. 

 

Thanks,

Russ

[puckotred]

I used airbrushthinner, but you need to do a extra coat...

[Russ2025]

Thanks for the advice. I’ll order some and give it a try.