le débutant Posted November 22, 2014 #1 Posted November 22, 2014 Welcome every body. Finally i am there. Tree build up to now,to build some experience and skill,for this project. I am glad to start the Santa Ana. I open the box this morning,to check all parts,fitting,wood,and instruction. I have to admit the instruction manuel is fantastic minimum tree picture per page,and plan are well done. The cut for parts is also good,i just hope the enthusiasm of first view will continue. So now first step after counting parts,is to number them and separate them from the form. I will come back with some picture later. P.S If i am doing something wrong feel free to help me. Thanks to all. jastrząb 1
jastrząb Posted November 22, 2014 #2 Posted November 22, 2014 Let's get it started DOn't forget to download some photos of this beautiful ship. Regards, Paweł le débutant 1 Paweł Current build: HMS Pandora: http://modelshipworld.com/index.php/topic/3409-hms-pandora-by-jastrz%C4%85b-constructo-185/ Finished projects: Roar Ege 1:25, Billing Boats Albatros 1:55, Constructo Santa Maria 1:50, Mantua
le débutant Posted November 22, 2014 Author #3 Posted November 22, 2014 Let's get it started DOn't forget to download some photos of this beautiful ship. Regards, Paweł I was ready to start.but i decided to empty the box first and i found out a corrective paper. Now all wood are properly number. Yes some picture will come.
mtdoramike Posted November 22, 2014 #4 Posted November 22, 2014 Oh boy, I can't wait. Plenty of Pictures please. The Santa Ana is one of my favorite models. le débutant 1
le débutant Posted November 22, 2014 Author #5 Posted November 22, 2014 Oh boy, I can't wait. Plenty of Pictures please. The Santa Ana is one of my favorite models. I will free the parts and after i will take picture of the content.
joemo Posted November 23, 2014 #6 Posted November 23, 2014 Please check build log of The Santa Ana by San Martin on this web site, excellent pictures of his build Good Luck Joe le débutant 1
le débutant Posted November 23, 2014 Author #7 Posted November 23, 2014 Please check build log of The Santa Ana by San Martin on this web site, excellent pictures of his build Good Luck Joe I did and there is only few picture.
le débutant Posted November 25, 2014 Author #8 Posted November 25, 2014 (edited) First picture. I build the keel the 3 parts together on a piece of wood to make sure the keel is straight. Good result. Then i build frame #7 making sure as the instruction manual for the 90D of all parts. Next step, 7 and 13 frame gets in but a little sending was necessary to fit,(but not glue up to now) Edited December 18, 2017 by le débutant GuntherMT, FishingManiac and mtdoramike 3
mtdoramike Posted November 26, 2014 #9 Posted November 26, 2014 That looks suspiciously like the same way the AL Victory build starts out. I have been curious if Artesania Latina didn't just revamp the Victory kit to make the Santa Ana. But either way, I love the ship and can't wait to follow along on your progress. le débutant 1
mtdoramike Posted November 26, 2014 #10 Posted November 26, 2014 Also, make sure and do a thorough inventory of the kit contents as I found a few pieces missing from my AL Victory kit like the whole photo etched brass sheet containing hammock stays. le débutant 1
le débutant Posted November 26, 2014 Author #11 Posted November 26, 2014 Also, make sure and do a thorough inventory of the kit contents as I found a few pieces missing from my AL Victory kit like the whole photo etched brass sheet containing hammock stays. It's done,at this time i d'ont have any problem on parts or the build. The only dark cloud is ,one sheet of error to correct. The picture on that sheet is non visible.
le débutant Posted November 26, 2014 Author #12 Posted November 26, 2014 Today i build or put in place the frame,not glue and tried to fit the floor,front part no problem, rear part yes first problem. I come to the conclusion that those parts are not the one for the boat.#38and #39 from 7A board.(as per instruction manual) First the parts are to long and the opening for the frame are .257in. when all the oder floor the opening are .328 average.
le débutant Posted December 2, 2014 Author #13 Posted December 2, 2014 (edited) All frame are glue,making sure 90 degree on both plan are respected. Eight stern collars are installed,the picture given is not accurate. The bow is installed,the two parts #38and #39 are not cut for this boat,to long and the slot are to small, but everything is modified for the fit. . Edited December 28, 2017 by le débutant yvesvidal and msberkman 2
mtdoramike Posted December 2, 2014 #14 Posted December 2, 2014 It's looking very good. Matter of fact, it looks just like the Latina Victory at this stage.
le débutant Posted December 2, 2014 Author #15 Posted December 2, 2014 It's looking very good. Matter of fact, it looks just like the Latina Victory at this stage. I believe also looking at other build. I am still looking for some picture of the original for the color of the boat,the only one available is all black.
mtdoramike Posted January 21, 2015 #16 Posted January 21, 2015 Has there been any progress on your build? Mike
le débutant Posted February 6, 2015 Author #17 Posted February 6, 2015 (edited) Sorry for the late info. Yes i have moved forward with the build,first the frame #7 did not sit level compare to the mane frame,and also when i glue the frame 32 did not sit to is place as i glue it. So i had to correct the too mistake. Then page 8 of the build,the planking of the first floor request to start at frame 17 and finish at frame 21,but on picture show between 20 to 24,to correct this error i did plank a bit longer than the request and install temporary the next floor to find the exact position. I also start to plate the lower part of the stern forecastle,and plate the hull, and cut out the gun port doors. The problem with the gun port is to respect the distance given between each one (30mm) I will put some picture later. Edited February 6, 2015 by le débutant
mtdoramike Posted February 7, 2015 #18 Posted February 7, 2015 I happily await pictures. If your Ana was anything like my AL Victory, you will have to shim numerous frames in order to get the planking to lay properly. le débutant 1
le débutant Posted February 7, 2015 Author #19 Posted February 7, 2015 I happily await pictures. If your Ana was anything like my AL Victory, you will have to shim numerous frames in order to get the planking to lay properly. I have to admit it is the same. To prevent any undesired curve i file and shim some frame as i build.
le débutant Posted February 7, 2015 Author #20 Posted February 7, 2015 (edited) Edited December 28, 2017 by le débutant Gundorph 1
le débutant Posted February 7, 2015 Author #21 Posted February 7, 2015 (edited) Edited December 28, 2017 by le débutant cristikc and msberkman 2
michael20 Posted February 7, 2015 #22 Posted February 7, 2015 Wow that looks great, Looking foreward to seeing more. Happy modeling. Marty G.
le débutant Posted February 7, 2015 Author #23 Posted February 7, 2015 Wow that looks great, Looking foreward to seeing more. Happy modeling. Marty G. Thanks. The progress is slow but there is a lot to correct.
mtdoramike Posted February 7, 2015 #24 Posted February 7, 2015 very nice work. It also doesn't look like you had to shim too many frames. Mike
le débutant Posted February 7, 2015 Author #25 Posted February 7, 2015 very nice work. It also doesn't look like you had to shim too many frames. Mike I had to send,and shim a total of four frame,and as i build before installing the plate i check the curve inward or outward and fix before glue.
le débutant Posted March 2, 2015 Author #26 Posted March 2, 2015 (edited) Edited December 28, 2017 by le débutant shipcarpenter, marktiedens, cristikc and 2 others 5
mtdoramike Posted March 2, 2015 #27 Posted March 2, 2015 It's looking beautiful. Those gun ports look perfect. I wish I could cut gun ports that nicely. Mike
le débutant Posted March 2, 2015 Author #28 Posted March 2, 2015 It's looking beautiful. Those gun ports look perfect. I wish I could cut gun ports that nicely. Mike I did mesure every gun port to the proper distance,compare to each other,using a pencil and once i have all design i start to make the hole. This way is easier to correct before making hole.
mtdoramike Posted March 3, 2015 #29 Posted March 3, 2015 (edited) hahahahahaha, I did the same as you, but mine in no way came out as nice as your gun ports. Maybe your pencil was sharper than mine. Edited March 3, 2015 by mtdoramike le débutant 1
le débutant Posted March 3, 2015 Author #30 Posted March 3, 2015 hahahahahaha, I did the same as you, but mine in no way came out as nice as your gun ports. Maybe your pencil was sharper than mine. I still have to do the other side. Sargon 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now