bryanc Posted March 21, 2015 Share #1 Posted March 21, 2015 HM Brig Supply 1759 Yard Transport / Convict Ship - the ship that, ahead of the first convict fleet, was first to enter Australian waters and what became Sydney harbour. First impressions; a very long, heavy box (the delivery note claimed it was 3Kg!), on opening I was surprised first by the amount of sawdust(!) then the reason for all the weight; copious amounts of 5mm thick ply and walnut panels very much in evidence, not to mention a staggering amount of planking, doweling etc. The quality of the wood and indeed the fittings appears good and that is very encouraging. The instructions; well, the actual written instructions little more than adequate, but the 6 huge sheets comprising the plans do seem very comprehensive and well produced. Time will tell! Construction has already begun, so my next post will be quite soon. Bryan tkay11, Dan Vadas, JimGer947 and 3 others 6 Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
UpstateNY Posted March 21, 2015 Share #2 Posted March 21, 2015 Hi Bryan, This looks like a great kit of a historic ship. Will follow along if you don't mind! Enjoy! Cheers, Nigel. bryanc 1 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild Link to comment Share on other sites More sharing options...
Jparsley Posted March 21, 2015 Share #3 Posted March 21, 2015 Can't wait to see iy bryanc 1 Quote USF Constellation 1/85 AL Jparsley Link to comment Share on other sites More sharing options...
bryanc Posted March 21, 2015 Author Share #4 Posted March 21, 2015 Hi Bryan, This looks like a great kit of a historic ship. Will follow along if you don't mind! Enjoy! Cheers, Nigel. Absolutely not Nigel, I'd be honoured if you sail along ;-) Its a good, solid kit, should be interesting, but please bear in mind I'm no expert. First set of pics and update coming shortly. Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
sygreen Posted March 21, 2015 Share #5 Posted March 21, 2015 I would like to follow the built. Seems interesting from both a construction and historical perspective. Hope you enjoy it Sy Quote Link to comment Share on other sites More sharing options...
riverboat Posted March 21, 2015 Share #6 Posted March 21, 2015 Hi Bryan......... Good choice ....I'm sure you'll enjoy the build..... I just got thru building her... will follow your progress. Have fun!! Frank bryanc 1 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
bryanc Posted March 22, 2015 Author Share #7 Posted March 22, 2015 Hi Bryan......... Good choice ....I'm sure you'll enjoy the build..... I just got thru building her... will follow your progress. Have fun!! Frank Hi Frank, did you do a build log, or have any construction pics? I need all the help I can get ;-) Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 22, 2015 Author Share #8 Posted March 22, 2015 The Build Continues I got straight down to work, and was mostly impressed by the quality of materials. The hull construction went ahead without any problems and I continue to be impressed by the robustness of the thing (at this stage anyway). I'm quite convinced that if I dropped it, the floor would suffer, not the ship ;-) I ploughed straight on with the false decking which did need some 'fettling' to make it fit, but nothing unexpected. But thats the easy bit, now to move onto the first planking, which I always approach with some trepidation, because as usual, the instructions for terminating plank ends, by which I mean where and how, is woefully inadequate. But this time I'll do more research into other peoples planking experiences, and the tips to be found in the 'Technique and Research' part of the site. Bryan riverboat, UpstateNY and tkay11 3 Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
UpstateNY Posted March 22, 2015 Share #9 Posted March 22, 2015 Hi Bryan, Wow...fast work and she looks great! As for planking, in case you haven't already seen it, take a look at the below video by Chuck in his great Cheerful Cutter build log. Great stuff and his heat technique has already really helped me on my build to shape strips easily. http://modelshipworld.com/index.php/topic/8131-hm-cutter-cheerful-1806-148-scale-by-chuck/page-22 Cheers, Nigel. bryanc 1 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild Link to comment Share on other sites More sharing options...
riverboat Posted March 22, 2015 Share #10 Posted March 22, 2015 (edited) Hi Bryan...... here's a link to my build log http://modelshipworld.com/index.php/topic/133-hmat-supply-by-riverboat-jotikacaldercraft-164th-scale/?hl=%2Bhmat+%2Bsupply Edited March 22, 2015 by riverboat bryanc 1 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
bryanc Posted March 22, 2015 Author Share #11 Posted March 22, 2015 Hi Bryan...... here's a link to my build log http://modelshipworld.com/index.php/topic/133-hmat-supply-by-riverboat-jotikacaldercraft-164th-scale/?hl=%2Bhmat+%2Bsupply Thank you so much Frank, you've no idea how much help thats going to be to me - and to others. What a wonderful job you did with her, so many hints and tips there, and I've only briefly skimmed through it for now. And thats got to be a masterclass in weathering!! Wonderful. Thanks again, I'll be referring to it constantly, Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 22, 2015 Author Share #12 Posted March 22, 2015 Hi Bryan, Wow...fast work and she looks great! As for planking, in case you haven't already seen it, take a look at the below video by Chuck in his great Cheerful Cutter build log. Great stuff and his heat technique has already really helped me on my build to shape strips easily. http://modelshipworld.com/index.php/topic/8131-hm-cutter-cheerful-1806-148-scale-by-chuck/page-22 Cheers, Nigel. Thanks Nigel, a really helpful little video. Like he admits though, what a shame a camera couldn't be behind him. Good tips though. Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
Tallshiptragic Posted March 22, 2015 Share #13 Posted March 22, 2015 Great start Bryan. I'm a big fan of the caldercraft kits, having built a heavily bashed Diana a few years ago. Unfortunately the log was lost when MSW 1 crashed. They're brilliant kits OOB and true masterpieces can be made with care and not too much effort. I admit even with the Diana the instructions where not the easiest to understand at times but there some wonderful builds of the supply on here so I don't think you'll have any problems. Will follow with interest. bryanc 1 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
riverboat Posted March 22, 2015 Share #14 Posted March 22, 2015 Looks like you're off to a nice start Byran..... I see you've already done the Lady Nelson, That really is a little nicer kit then the Supply, I think you'll find the instructions were a lot better than one's with The Supply. You Nelson came out real nice , so you should have no problem with the Supply build......... just take your time fairing up the hull, it's very important so your planks have a nice run. I hope my log will be of some help,if you need it. Have fun!!! Frank bryanc 1 Quote completed build: Delta River Co. Riverboat HMAT SUPPLY USRC "ALERT" in progress: Red Dragon (Chinese junk) Link to comment Share on other sites More sharing options...
hornet Posted March 23, 2015 Share #15 Posted March 23, 2015 Hi Bryan. I am somewhat ahead of you on the same build. Am about to start work on the masts and yards. Have done a fair bit of bashing of the kit though. My only comment at this stage is that the supplied timber for the second layer of planking is quite brittlle, rough and splintery, particularly on the edges. You will probably need to go through the whole lot and disregard some of them. Luckily Caldercraft provides more than enough to complete the job. I also found a very good example of this ship in the online exhibit from the Powerhouse Museum in Sydney. It is worth a look if you are considering any bashing. Use the Museum search facility - enter HM Armed Brig Supply - 24 hi res pics. bryanc and Telp 2 Quote Hornet Current Build: - OcCre Shackleton’s Endurance. Completed Ship Builds: Caldercraft - HM Bark Endeavour. (in Gallery) Caldercraft - HMAV Bounty (in Gallery) Caldercraft - HM Brig Supply (In Gallery) Aeropiccola - Golden Hind - Constitution Clipper Seawitch (maker unknown - too long ago to remember!) Corel - Victory Modeller's Shipyard - A Schooner of Port Jackson - In Gallery - Brig `Perseverance' - In Gallery - Cutter `Mermaid'- In Gallery - Sirius Longboat (bashed) - In Gallery - Sloop Norfolk - In Gallery Completed Cannon: - French 18th Century Naval Cannon - Napoleonic 12 pound field piece - English 18th Century Carronade Non Ship Builds - Sopwith Camel - Artesania Latina - Fokker DR1 - Artesania Latina Link to comment Share on other sites More sharing options...
bryanc Posted March 24, 2015 Author Share #16 Posted March 24, 2015 Looks like you're off to a nice start Byran..... I see you've already done the Lady Nelson, That really is a little nicer kit then the Supply, I think you'll find the instructions were a lot better than one's with The Supply. You Nelson came out real nice , so you should have no problem with the Supply build......... just take your time fairing up the hull, it's very important so your planks have a nice run. I hope my log will be of some help,if you need it. Have fun!!! Frank Hi again Frank, Yes its planking the hull that always tests me! I'm taking it more slowly and deliberately, but am still struggling! Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 24, 2015 Author Share #17 Posted March 24, 2015 Great start Bryan. I'm a big fan of the caldercraft kits, having built a heavily bashed Diana a few years ago. Unfortunately the log was lost when MSW 1 crashed. They're brilliant kits OOB and true masterpieces can be made with care and not too much effort. I admit even with the Diana the instructions where not the easiest to understand at times but there some wonderful builds of the supply on here so I don't think you'll have any problems. Will follow with interest. Thanks Anton, Yes the quality of this Caldercraft has impressed me very much - mostly. The aft deck facia is actually quite pathetically bad! For the first time I'm going to have to indulge in some quite dramatic 'bashing'! I'll try and photograph it all. Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 24, 2015 Author Share #18 Posted March 24, 2015 Hi Bryan. I am somewhat ahead of you on the same build. Am about to start work on the masts and yards. Have done a fair bit of bashing of the kit though. My only comment at this stage is that the supplied timber for the second layer of planking is quite brittlle, rough and splintery, particularly on the edges. You will probably need to go through the whole lot and disregard some of them. Luckily Caldercraft provides more than enough to complete the job. I also found a very good example of this ship in the online exhibit from the Powerhouse Museum in Sydney. It is worth a look if you are considering any bashing. Use the Museum search facility - enter HM Armed Brig Supply - 24 hi res pics. Hi Hornet, Thanks for the message. I can't find your build log, I'd love to see it. I can't remember how I stumbled upon it, but I'm already familiar with the Powerhouse Museums superb photos of the 'Supply', and have plundered them unmercifully. I have grave doubts my work is going to end up of a similar standard though! Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 25, 2015 Author Share #19 Posted March 25, 2015 Planking Begins!And so to the planking. As discussed, something I'm always apprehensive about, but I'm feeling a tad more confident than previously.The photos will speak more loudly than I can... Stern post and keel edge to be glued on first (I know, I know, the keel should be longer and the stern post sit on it, my first mistake, but hardly vital. I hope)....and the planking proper begins......and continues. The eagle eyed will notice a hole 'carved' into the aft deck facia. This is part of my first attempt at 'bashing'. The hole is an aperture for one of the two windows (plus a door) in the aft deck 'wall'. I'm completely replacing the facia with a home made one, and got completely carried away in an attempt to make the windows (and door) 'see-through'! You can actually see the brass 'windows', and the door (which will also be replaced I think) on the mat at the bottom right.It remains to be seen how successful it is! But, plenty of planking to be done yet... GuntherMT, oscarmate, UpstateNY and 1 other 4 Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
Thunder Posted March 25, 2015 Share #20 Posted March 25, 2015 Hello Bryan, excellent choice of kit. I built this, unfortunately what I put on this site was lost. Just watch one of rear bulkheads. One of mine was too small so had to do a lot of work to correct. You can see the same fault on some other builds. Bryan, you are not far from me if you wanted to look as this build or the William kit. I am only in Burton on Trent. bryanc 1 Quote Current Build(s): H.M.S Diana 1794 - Caldercraft 1:64 Scale Completed Builds: H.M.S. Cruiser 1797 - Caldercraft 1:64 Scale H.M. Naval Cutter Speedy 1828 - Model Shipwright 1:48 Royal Caroline 1749 - Panart 1:47 H.M. Brig Supply 1759 - Caldercraft 1:64 H.M.S. Pickle 1778 - Caldercraft 1:64 H.M.Y. Chatham 1741 - Caldercraft 1:64 H.M.S. Resolution Cutter - Corel 1:50 H.M.S. Racehorse - Sergal 1:47 (Renamed H.M.S. Thunder 1740) first wooden kit build. Link to comment Share on other sites More sharing options...
hornet Posted March 25, 2015 Share #21 Posted March 25, 2015 (edited) You may also want to shape and glue a couple of pieces of ply under the front and rear of the main deck ( part 21). There is quite a lot of flex in it where it butts up to bulkhead 8 at the stern end and bulkhead 3 at the bow end. I have also sent you a PM with a few pics and some other ideas I have used in my build so far. Edited March 26, 2015 by hornet bryanc 1 Quote Hornet Current Build: - OcCre Shackleton’s Endurance. Completed Ship Builds: Caldercraft - HM Bark Endeavour. (in Gallery) Caldercraft - HMAV Bounty (in Gallery) Caldercraft - HM Brig Supply (In Gallery) Aeropiccola - Golden Hind - Constitution Clipper Seawitch (maker unknown - too long ago to remember!) Corel - Victory Modeller's Shipyard - A Schooner of Port Jackson - In Gallery - Brig `Perseverance' - In Gallery - Cutter `Mermaid'- In Gallery - Sirius Longboat (bashed) - In Gallery - Sloop Norfolk - In Gallery Completed Cannon: - French 18th Century Naval Cannon - Napoleonic 12 pound field piece - English 18th Century Carronade Non Ship Builds - Sopwith Camel - Artesania Latina - Fokker DR1 - Artesania Latina Link to comment Share on other sites More sharing options...
bryanc Posted March 26, 2015 Author Share #22 Posted March 26, 2015 You may also want to shape and glue a couple of pieces of ply under the front and rear of the main deck ( part 21). There is quite a lot of flex in it where it butts up to bulkhead 8 at the stern end and bulkhead 3 at the bow end. I have also sent you a PM with a few pics and some other ideas I have used in my build so far. Yes Hornet, I think bulkhead 3 caused me a bit of grief and I wish I had the foresight to reinforce it a little. Didn't get your PM (as far as I can tell!!). Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 26, 2015 Author Share #23 Posted March 26, 2015 Hello Bryan, excellent choice of kit. I built this, unfortunately what I put on this site was lost. Just watch one of rear bulkheads. One of mine was too small so had to do a lot of work to correct. You can see the same fault on some other builds. Bryan, you are not far from me if you wanted to look as this build or the William kit. I am only in Burton on Trent. Yes Thunder, its proving to be a really enjoyable build. The errant rear bulkhead is probably the one refered to above. Thats a really kind offer, and yes Burton on Trent is not too far, perhaps when the weather (eventually) picks up? Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 26, 2015 Author Share #24 Posted March 26, 2015 Port side (first) planking complete. I cracked on, encouraged by things going fairly well. Very enjoyable build this is proving to be. Of course mine is far from perfect, but my word I'm improving! Photos below show the port side complete and filled, but not yet sanded and much of it is little more than a 'wash'. Now I know filler covers a multitude of sins, but its so much better than my last build. Now a good sanding session, then the starboard side gets the same treatment! Bryan maggsl_01 and riverboat 2 Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
hornet Posted March 26, 2015 Share #25 Posted March 26, 2015 (edited) Brian, do you have messenger enabled. From my end it says the massage has been sent but not read by you. I've never had a problem sending a message before. Not sure what the problem is otherwise Edited March 26, 2015 by hornet Quote Hornet Current Build: - OcCre Shackleton’s Endurance. Completed Ship Builds: Caldercraft - HM Bark Endeavour. (in Gallery) Caldercraft - HMAV Bounty (in Gallery) Caldercraft - HM Brig Supply (In Gallery) Aeropiccola - Golden Hind - Constitution Clipper Seawitch (maker unknown - too long ago to remember!) Corel - Victory Modeller's Shipyard - A Schooner of Port Jackson - In Gallery - Brig `Perseverance' - In Gallery - Cutter `Mermaid'- In Gallery - Sirius Longboat (bashed) - In Gallery - Sloop Norfolk - In Gallery Completed Cannon: - French 18th Century Naval Cannon - Napoleonic 12 pound field piece - English 18th Century Carronade Non Ship Builds - Sopwith Camel - Artesania Latina - Fokker DR1 - Artesania Latina Link to comment Share on other sites More sharing options...
Tallshiptragic Posted March 26, 2015 Share #26 Posted March 26, 2015 Looking good Bryan. I've always used my first planking just as a base - still try to keep as neat as possible but mainly to give good lines for the second planking. A lot of builders treat the first layer as if it was the only but I'm one of the lazy ones... can't wait to see more. bryanc 1 Quote Anton T Current build 1/78 Sovereign of the Seas - Sergal - kit bashed 1/72 Arleigh Burke class DDG flight iia/iii - Sratch built RC - no log Waiting for further inspiration STS Leeuwin II 1/56 scratch built (90% completed) Previous builds - completed 1/72 HMAS Brisbane, Airwarfare Destroyer 2014 -Scratch built RC - completed 1/64 HMS Diana 1796 - caldercraft kit - completed 1/75 Friesland 1668- mamoli kit - completed 1/96 HMAS Newcastle FFG 2011- scratch built RC - completed 1/75 Vasa - Billing Boats - completed Link to comment Share on other sites More sharing options...
bryanc Posted March 27, 2015 Author Share #27 Posted March 27, 2015 Looking good Bryan. I've always used my first planking just as a base - still try to keep as neat as possible but mainly to give good lines for the second planking. A lot of builders treat the first layer as if it was the only but I'm one of the lazy ones... can't wait to see more. ...and I'm sure you're right, its obviously just a base for the second and more important one. I was just waxing a little lyrical because its such an improvement on my first ship:-) Mind you having just completed the sanding, its not quite so pristine looking now! Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
bryanc Posted March 27, 2015 Author Share #28 Posted March 27, 2015 Brian, do you have messenger enabled. From my end it says the massage has been sent but not read by you. I've never had a problem sending a message before. Not sure what the problem is otherwise Hi Hornet, I've just checked my settings, and while they are a little confusing, as far as I can make out I should be able to receive messages - in fact I have an old one from ages ago. !? Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
hornet Posted March 27, 2015 Share #29 Posted March 27, 2015 Hi Hornet, I've just checked my settings, and while they are a little confusing, as far as I can make out I should be able to receive messages - in fact I have an old one from ages ago. !? I'm not keen to 'clog up' your build log with my stuff Brian. I'll try resending the PM. bryanc 1 Quote Hornet Current Build: - OcCre Shackleton’s Endurance. Completed Ship Builds: Caldercraft - HM Bark Endeavour. (in Gallery) Caldercraft - HMAV Bounty (in Gallery) Caldercraft - HM Brig Supply (In Gallery) Aeropiccola - Golden Hind - Constitution Clipper Seawitch (maker unknown - too long ago to remember!) Corel - Victory Modeller's Shipyard - A Schooner of Port Jackson - In Gallery - Brig `Perseverance' - In Gallery - Cutter `Mermaid'- In Gallery - Sirius Longboat (bashed) - In Gallery - Sloop Norfolk - In Gallery Completed Cannon: - French 18th Century Naval Cannon - Napoleonic 12 pound field piece - English 18th Century Carronade Non Ship Builds - Sopwith Camel - Artesania Latina - Fokker DR1 - Artesania Latina Link to comment Share on other sites More sharing options...
bryanc Posted March 31, 2015 Author Share #30 Posted March 31, 2015 Second Planking The second planking continues apace. It's going well thus far and I think it will look good when fettled and finished properly. Of course I've made errors which I'll have to make good before too long. In an effort to avoid pin holes, I've used superglue for the planking (except at the very tip of the prow, where the curvature of the planks was too much for the glue to hold initially), but its wicked stuff to work with. This type (the yellow labelled bottle) is a tad too runny, and resolutely fast and hard drying. Its hell for the finger tips! A lot of work yet before I can turn my attention to the more interesting deck planking. Bryan Quote Completed build Caronada Francese Completed build Posto di Combattimanto Current build Navio Rayo - Puesto de Combate Current build HMS Bounty Completed build HMS Victory Cross Section Completed build HM Brig "Supply" Completed build The Lady Nelson Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.