Jump to content

jsolka

Members
  • Posts

    24
  • Joined

  • Last visited

  1. This is a great forum. I'm new to ship models, and didn't even know that there is the whole world of gluing products and techniques.
  2. I've found a nice link (IMHO) on traditional English Ships structure. I liked the drawings showing detail of framing. http://www.cnrs-scrn.org/northern_mariner/vol03/tnm_3_1_1-43.pdf One more link - a nice book, and free pdf download. https://anthonywillmott.files.wordpress.com/2012/09/a-practical-course-in-wooden-boat-and-ship-building-by-van-gaasbeek.pdf
  3. "Supplied in a French-fitted embossed leatherette box" - hmm... Sounds a little effeminate:) But seriously - I know Lee Valley, and their tools are very good. And what was I thinking to consider planes that cost $10 for three. Best to spend a bit more. One question - can you use a honing guide on their blades? What do you think of those? http://www.leevalley.com/US/wood/page.aspx?p=50232&cat=1,41182 There are some more, but don't won't to push the envelope. I think the most useful would be one with good square shape for shooting. The also have an edge plane. Okay, that's enough. Thank you gentlemen.
  4. It seems a good idea. And yeah, checking during the process... I know. Measure twice, cut once, I have to work on it. Thanks
  5. First mistakes - sanded too much, and now the pieces are a tad smaller than they appear on the plan (and surfaces weren't perfectly true). This could be not entirely me fault since the precut pieces didn't allow for sanding (perhaps?). While building from scratch this could be compensated by cutting pieces a bit larger. Also I think that when I would really like surfaces to be perfect, I may consider using planes for truing surfaces rather than sandpaper. Does anybody have any advise/recommendations about hand planes that can be used in model making. I've seem some cute brass and wood micro block planes, but wasn't fully convinced.
  6. Your presentation is very good and detailed. Nice pics. Amazing job. I'm not there yet, so the most of it didn't really speak to me as it would, should I have been on that level. Thank you.
  7. I want to learn gradually so I can eventually build my real Spray to travel the world round and round:). It is also a very basic guide on sanding for very basic absolute beginners. I used a glass surface to guide my sanding block so it stays at the right angle. I also glued pieces of sandpaper to it so I could have more control over sanding.
  8. Hi, This is a very basic beginner's question. When I want to sand a narrow piece of wood (especially while making bevels) is there any technique (besides a steady hand) to maintain steady angle and flat surface on the sanded piece? Thank you.
  9. You have a point. Wood has a proven record of lasting very, very long, at least in certain conditions. On the other hand, mdf is used now even in restoration projects in architectural woodworking. The rule is, mdf for stability, wood for strength. Medium Density Fiberboard (MDF) Moisture Resisitant, FSC Certified, No Added Formaldehyde (NAF) Medex® is a sustainable, moisture resistant, medium density fiberboard (MDF) panel utilizing a formaldehyde-free adhesive system and pre-consumer recycled wood fiber. Medex® is engineered for interior high moisture areas in non-structural applications and is used in place of sanded plywood or solid wood. With the versatility of a superior composite wood panel and the enhancement of indoor air quality, Medex® has been specified in hundreds of commercial, institutional and conservator projects since the 1980’s. Medex carries an industry leading MR50 moisture rating We have upgraded our stocking program to Medex over the venerable Medite II SierraPine’s Medex MDF is produced with a No Added Formaldehyde resin and 100% post-industrial recycled wood fiber. FSC MEDEX MAY CONTRIBUTE FOR THE FOLLOWING LEED CREDITS Materials & Resources (4.1, 4.2, 7.0) Indoor Environmental Quality (4.4) Stock Items 4' x 8' 4' x 10' 4' x 16' 5' x 8' 5' x 10' 1/4" ,3/8",1/2", 5/8",11/16",3/4",1" , 1-1/8" ,1-1/4" ,
  10. Please tell. I was trying to get freebies pdfs but not very successful. So long. BTW I Got me a kit rowing model boat to follow Chapell's advice to start small t. If I succeed I will proceed further. Thank you, Secret Sharer Joshua Pascal M. Fitch Slocum the 3rd
  11. Thanks Alan. I was actually looking for the name. I've just found a book: The Built-Up Ship Model By Charles G. Davis It seems good.
  12. Hi, Here's a pic of traditional framing in which the frames (ribs) are not at the right angle to the keel (on the vertical plane). I was wondering what could be possible cons and pros for this kind of framing. I am interested in different approaches to framing and its history. I'm new to boat design, and maybe a tad anal. Anyway, as an absolute beginner, I've found it interesting. Thank you.
  13. Almost unbelievable, as my pastor used to say. Congrats!
×
×
  • Create New...