Jump to content
MSW Spring Donation Drive

Paul0367

Members
 View Profile  See their activity

  • Posts

    504

  • Joined

  • Last visited

 Content Type 

Everything posted by Paul0367

  1. Paul0367
    Sails going at a snails pace, cut, stitched, fitted to the spars and test fitted before adding tell tails and staining to look used, worn and marked. Well thats what I’m trying to do but one will see if I made the right choice to bear sails.
  2. Paul0367
    I am still on the sails saga and will be for quite some time, sewing, trimming, edging, fitting bolt ropes and basically learning the skills of a taylor, well trying that is. I have tried many methods of getting them to hold that wind swept look. I have opted to soak the sail in PVA water mix, at first I moulded the sail into a close to finished shape an let it dry and air brushed coffee on to make it aged. it was very effective but as I fitted it to the spar and added the tell tails it was almost flat again. Plan B is now to airbrush water on the sail in situ and heat with a heat gun and hopefully they will form naturally and hold position due to adhesive ingrained. At the moment the sail is just bent by Hand to get the look. Despite the ships made, many opt out of sails, mmm I wonder why ?
  3. Paul0367
    Oh mate thanks for the lovely comments during your build, I have not been posting much lately, I have to install the spars but to be honest the sails have had me stopped from doing this whilst testing fabrics as I am making my own. They need fitting to the spars prior to the spars being fitted. Due to deciding to ditch the kits sails this forced me to learn how to use a sewing machine. I felt whilst the canons are run out the sails, lower furled and uppers in full Wind was the way to go. This adds a lot of work to the kit but I hope to get a one off build and use the Victory as a learning curve for future ships
  4. Paul0367
    Andy, the lifeboats look spot on that you mentioned, cheers
  5. Paul0367
    I,m still here and my ship has officially passed its fourth year build time, hey no rush as they say. I have come to a stand still for a while whilst I tackle the sails and I have come to the assumption that the kit ones are to be abandoned as there just two thick and hang all wrong, even furled they look clumsy. As my canons are run out I have to enter the world of furled sails, not sure if to furl them all, Easiest solution, or furl just the lower sails to that would be to avoid canon ball damage from battle. The sail in the picture is actually a test and is mounted on a spare rod and held in position for effect. I have not stitched it at the moment but that is another thing I have to learn, sewing machine although I do not have an over locking one. Its pure white Poplin I have used and literally just lightly sprayed it with coffee to give it the dirty worn appearance.
  6. Paul0367
    Not what to do especially with the tricky netting but somehow I feel I’m not alone doing this, dropping my snips above the deck, the ship looks battle worn. Well after an hour af extra work she is repaired and on I go with the rigging.
  7. Paul0367
    Aaaaah I know it’s difficult so see on the picture but I have only rigged the upper mast section and 3/4 the way up with the same line as the lower,,, ahhh and it’s way two thick, there are a few other lines that are being replaced with the correct size too. the only saving grace is there not notted or glued yet so it’s quite easy to sort. Steve I will be visiting the site you have pointed me too regards the sails, thanks.
  8. Paul0367
    I am actually enjoying this rigging stuff now but realise the spars have to be installed before any of the rigging fitted can be fastened down and become live, as you know a lot of spar fastenings are tied off inbound and all the above will get in the way. I now have to consider the sails and learning to furl the lower ones.The ship is becoming a ship now as the rigging already positioned gives it so much character. I have had to get the rat lines out of the way to see where I’m at and this was the only way I could think of getting rid of them l, for now
  9. Paul0367
    Nice comments, thank you, I have started making a few coils for the belay pins, I also do a few lines a night well until I have had enough, I couldn’t sit there bashing them out all night, I also find I have to be in the mood to do the ship and really I am one of the lucky ones as she lives in a room of her own and I can just come and go. That said If I have a long break it takes me ages to pick her up again, this log helps to look back on. I have prowled other builders sites and taken advise from there errors regards rigging and trying to avoid them. It’s certainly the hardest part especially, hard in respect of lots of research required, if your going for the real way things were done, problem is it’s very visible too
  10. Paul0367
    Not yet they have been left for another day, that said the boats would hide the canons and the detail below so artistic licence may be issued but I will see.
  11. Paul0367
    Enjoyable mmmm hardest.... getting good info on the rigging is difficult. Drawings etc, I need Caldercraft plans there so much better for rigging. Anyone out there who can copy me some would be a instant hero. Problem I have is a start building, then leave a while and have to re pick up where I left off and it takes ages to grasp the point I’m at. Rigging full time would have me go crazier than I already am.
  12. Paul0367
    Still here, slowly building through life’s commitments, rigging is taking quite some time studying what went where and what it does and how to rig avoiding the, I can not get to it now because I rigged that first scenario. The rigging fitted so far is just loose except main stays and when I’m happy the access is not comprised I will fix them. There is no rush and she will probably take me as long as the real ship to complete at this rate of knots. Hope your all ok out there.
  13. Paul0367
    Help. I was lead to beleive that when the canons are run out for battle as the image shows the lower sails are furled to prevent canon balls shredding them. But the image contradicts this theory. Now was this an artist licence to paint the HMS Victory in this way, or are our beliefs questionable. I ask as I am creeping upto this stage. I considered leaving her bereft of sails but why would canons be run out when there are no sails on her. This image was from a documentary : Shipwrecks Britains Sunken past
  14. Paul0367
    Winter arriving in the UK and building re-starts. I have started adding many additional details from the books that I have at my disposal before the ratlines are fitted and a lot of access is lost. Despite the kit being basic in its approach to many areas, there is a lot that can be added depending on where we as builders are prepaired to take it. Main Jeers and main slings added on the main mast.
  15. Paul0367
    I'm still going, putting the many blocks and fittings on the mast, lower ratlines are ready but I will leave them as late as possible before fittings go on to keep access to the mast bases. lots of work but little to show and trying to rig her as she really was is very time consuming and tricky at this scale
  16. Paul0367
    I have done just the main mast upper shrouds, reading other forums this was recommended to be carried out on the bench, this make life mush easier. I actually made them the same thickness as the main shrouds as the kit states but I felt them to be to thick and after further research found that the uppers are actually thinner ropes. Yep after all the work I had to strip them and start again.
  17. Paul0367
  18. Paul0367
    That makes good sense, I wasn't sure if I could build a ship so the Caldercraft one would have been a bit expensive to find the hobby wasn't for me. I never took in account the scale issues on a mass scale. bad enough making a few.
  19. Paul0367
    Sort of expected that but really it's quite a crucial part to decide not to supply with a model ship. ok I got two which swing from the davits. My guess is they assumed it only had the two because today they are not in situe on the vessel
  20. Paul0367
    Still going slow but adding in extra detail of the tackle used to assist the boat removal, boats which the kit has decided were not important enough to fit.... Does any one know where I can get boats of the scale of 1.92 for this kit, Or am I to make my own
  21. Paul0367
    Beautifully neat and precise work. such a shame to be adding copper plates to hide it all, What is a shock for me is how big the Caldercraft version is. Just wish now I had the guts to risk spending the cash on a hobby I was dabbling in for the first time with my current build.
  22. Paul0367
    Cheers guys, the lower shrouds are to be installed as late as I can possibly leave them so I have access to those mast as much as possible. The only reason I fitted them was to enable me to fit the standing rigging over the tops of the shrouds and hide more work. I have been messing with my new DSLR today and the Victory was my target, so here is a few random shots of her as she stands today Oh MSW the new site is fantastic and so easy to put pictures on than it was before, hats of guys and thank you
  23. Paul0367
    Maturin, Thank you very much but I do find myself looking at other models and feeling the same. There are some beautiful works on here.
  24. Paul0367
    Sorry to hear you have been unwell and glad your on the mend. I don't do the ship too often as other things take over, Summertime. (my log shows this) It is difficult to pick up after a long break trying to remember where im at. The rigging for a first timer is tough, not the actual rigging itself but the sequences to avoid lines getting in my way and it looks like the dead eyes on the shrouds and ratlines come very late in the build.
  25. Paul0367
    I looked at them and they were very good but I was lazy and Andy W gave me the sizes I required. despite this I did make up the shrouds at 0.75 in error when they should have been 1.0 all were seized too.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...