Jump to content

Jack12477

Members
 View Profile  See their activity

  • Posts

    5,573

  • Joined

  • Last visited

 Content Type 

Everything posted by Jack12477

  1. Jack12477
    Yes it is for siphon tube airbrushes.
  2. Jack12477
    I hope the Finance Minister approves all this Military Spending 😁😁😁😁😇
  3. Jack12477
    Have you looked at Badger's In bottle filter I've used on for years
  4. Jack12477
    It's simple ! Get a 15x15 piece of 1/2 inch plywood, coat it with Gesso, before that dries sift some backyard dirt over the whole surface. Let dry! (Use the finest mesh kitchen shifter/strainer you can find. Lay the Gesso on rather thick). Then lay the matt on to that base.
  5. Jack12477
    Actually I didn't! I started out building model HO scale train car kits with my Dad when I was 10 or 11, got my first 35mm Kodak camera in 8th grade. After that it was both modeling and photography.
  6. Jack12477
    I guess when they did my cataract surgery they sucked a few extra brain cells along with the cataract debris. 😉🤔 I was thinking I could avoid taping all the windows by not installing them till later. But I realized they are installed in their own frames which are then installed in the door frames. So matching the camo patterns across the frames would be a bear. So after coating the clear plastic windows, headlamps, in two coats of Pledge, I glued them into their frames using Gator's Grip Acrylic Hobby Glue, then glued the frames into the doors and windshield, glued the doors, except driver's door, into place (driver's door got taped in place from inside because the drivers right arm has to be glue to his body after the top is glue to chassis.) Then came the tedious task of taping all the windows, headlights, tail lights et al. Results look like this I think I will re-spray the green coat since it got a little mucked up in the process, then spray the camo coats. And this time I will try the Vallejo Model Air paints. Question for all you users of the Tamiya stands shown above: how do you keep them so new looking while spray painting? 🤔 Do you have two stands, one for spray painting and one for decaling etc? Sorry for the fuzziness in photos, the cellphone camera doesn't focus close and neither do my eyes at the moment. 😁😆
  7. Jack12477
    Growing up as a wee lad post WWII, we had a neighbor across the street from us who had flown with the Lafayette Escadrille. I remember him telling Dad about their flight instructions/training. Basically classroom instructions using those airplanes on a stick, then out to the airfield for some static instruction on controls, then you took off solo, flew around then landed. If you landed with both you and the plane in one piece, they pinned your wings on and pronounced you an aviator/pilot. And yes he did talk about the castor oil and the post flight (sometimes in-flight) oopsies. I heard the same comments from Cole Palen, founder of the Olde Rhinebeck Aerodrome here, and got a whiff of the castor oil from his planes.
  8. Jack12477
  9. Jack12477
    I'm in
  10. Jack12477
    Nice job ! Both look good together !
  11. Jack12477
    Andy, seems Canada Post, UPS, and FedEx all use the same tracking software, I get those same kind of updates here, except here they mark it as "in transit" .
  12. Jack12477
    I placed an order with Scale Hobbyist on 10/12, they shipped it out on 10/13 via UPS. UPS picked the package up in Nashua NH, transported it to Bristol RI, then to East Syracuse NY, then to Kingston NY to deliver to me. It traveled approximately 606 land miles to reach me. A car leaving Nashua NH would only need to drive 215 miles in 3 hours 45 minutes to reach me. UPS could have shipped it thru Albany NY a more direct route. But it did arrive in 2 days time on Saturday 10/15. Don't know how it was transported from Bristol RI to East Syracuse NY (air or road) but they passed right by me enroute to Syracuse. Don't feel bad Andy !
  13. Jack12477
    While waiting for my eyes to heal and settle down, I ordered a resupply of Vallejo paints, thinners etc, and this new kit to add to the stash.
  14. Jack12477
    I recommend using Hydrocal casting plaster, it’s lightweight, strong and easy to use. Woodland Scenics makes it. ScaleHobbyist is a good source for Woodland Scenics products including the rubber rock molds.
  15. Jack12477
    Thanks! The 2 ruins are old Verlinden cast plaster kits I had. The 3rd dio is freelanced scenery using rubber rock molds from Woodland Scenics. Oops my bad ! The other Verlinden diorama is in my M16 Multi-gun Motor Carriage Diorama
  16. Jack12477
    Yes, you're right Mark, but at 1:35 scale. Alan is right they are bulky, mine are about 12x12x12. Link is in my signature under Sherman tank dioramas I'm in too, Alan.
  17. Jack12477
    I still have mine. But after several failed attempts at developing and printing color film, decided it was cheaper to let Kodak do the color and concentrated on doing B&W in the home darkroom.
  18. Jack12477
    Yea, took the family on a 3 week drive from NY to Colorado, Wyoming, South Dakota and back visiting, Mesa Verde, Rocky Mountain National Park, Estes, Yellowstone, Tetons, Rushmore, Badlands et al. Left with 36 rolls of 36 exposure Kodachrome 200, ran out midway thru Yellowstone, had to buy 10 rolls of 36 exposure Ektachrome 200. Ran out of that too by the time we go home. Of course back then film & processing was cheapest part of trip. Sorting thru them was a fun time.
  19. Jack12477
    That does look sharper and more depth. BTW Some camera terms ISO ( or ASA in the old days) is a measure of film speed or sensitivity to light. The higher the number the more sensitivity or as we used to say "speed". F-stop is the ratio of the cross sectional diameter of the aperture to the focal length of lens, expressed as f/nn , e.g. f/16, f/22, as the number goes up, the diameter decreases allowing less light to pass thru, as the number go down the diameter increases allowing more light to pass thru. As you go from one F-stop to another the amount of light passing thru increases/decreases by a factor of 2. So going from f/8 to f/11 ( or from f/16 to f/22) you let in 1/2 the light, reversing and going from f/22 to f/16 (or from f/11 to f/8) you let in 2x the light. So f/8 on a 50mm lens is the same as f/8 on a 300 mm lens, only difference is the aperature diameter. Aperature - think Iris of your eye. Same factor applies to shutter speed. f/8 at 1/250 sec is the same exposure as f/11 at 1/125 sec. Feel free to PM me with questions. I cut my teeth on mechanical manual cameras with hand-held light meters. 😅
  20. Jack12477
    Nice looking model, nice photos. Great job as usual! 👍👍 Suggestion: For greater depth of field aka depth of focus, take the camera out of Auto mode and select Aperture Preferred mode, designated as Av on most camera dials. Choose an aperture of f/16 or higher, e.g., f/22, f/32, (my Pentax DSLR will go to f/32), leave the ISO setting on Auto, it might select ISO 3200, make sure the shutter speed it selects is 1/50 sec or higher, if you are not using a tripod or the deck railing, e.g., 1/125, 1/250, etc. I think your camera has Center Weighted and Spot metering and Center Weighted and Spot focus, if so select them also. Experiment a little, it's digital so no wasted film to worry about. Just delete the bad ones. 😉 You're shooting in bright sunlight so plenty of light. Remember the higher the f/nn value, the smaller the diameter of the aperture and the greater the depth of field/focus, the lower the value the bigger the diameter and shorter depth of field.
  21. Jack12477
    And the Insurance on a aircraft is Marine Insurance. (It was one of Dad's trick questions.)
  22. Jack12477
    At least it's not United Parcel Smashers or US Pony Express. 😁😁😁
  23. Jack12477
    Modeling is on hold till my eyes readjust to cataract surgery. Right now even with cheaters I can’t see what I'm doing.
  24. Jack12477
    Modeling is on hold till my eyes readjust to cataract surgery. Right now even with cheaters I can’t see what I'm doing.
  25. Jack12477
    EG what scale are your F4 kits ? 1:48 or 1:32 ?

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...