foxy

At Nelsons last battle  the marines suffered very badly, Nelson refused any one going to the tops as sharp shooters, which ment the marines had to withstand a blistering array of grenades and musket fire.
 
The marine Captain had to call up all the Marines manning the guns to help stem the tide on deck.
As there were only a few marines left on deck to return fire.
 
Frank 

Cheers Daniel.

Well now its the draught marks next from Dafi's etched set.

Good to have the hints and tips at this part of the build.
Stern. will add more copper to tidy up.


Same with Bow.


Have now completed all the Hatch's and tided up the hull.
Then fixed the channels in position and left to set proper.





Have also fixed masts in position.
Next is dead-eye's and crest to bow.

Frank. 

Cheers OC.

Well its a picture of the Captains quarters, have added more items after this picture, doors to the Galley and some smaller items.



Placed poop deck on at this stage and added some more fittings.





Then it was to the rigging I turned.
Made up heart blocks from Syren models and added to bowsprit for preventer stay's later.







Next its the port side hatch's and a clean up, then on with the channels.

Frank. 

Cheers OC.

Well its a picture of the Captains quarters, have added more items after this picture, doors to the Galley and some smaller items.



Placed poop deck on at this stage and added some more fittings.





Then it was to the rigging I turned.
Made up heart blocks from Syren models and added to bowsprit for preventer stay's later.







Next its the port side hatch's and a clean up, then on with the channels.

Frank. 

Added the windows at this stage.


Plus Captian Hatcher tested the Marine work.


Then it was a test fit of the masts.



All sitting comfortable.



Next its fit out the Captains quarters and start on the port side hatch's.
Fix the poop deck and then the Channels/deadeye's and chains.

No pressure then.
 
Frank. 

Thanks very much Bob.

It was an old kit and took some work to get the crest looking right, Dafi made new lions for his and I nearly went down that road.
But happy with it.

Next it was the ships wheel in place, made sure the poop deck was not compromised.




Added figures that may or may not be used.

Next I fitted the Bowsprit at this time.
Adding Dafi's Resin Knights head that I explained earlier how I went about this.



Rapped ropes around, for this I used black 0.65mm rope, will use also for the lower preventer stay's.


Then the marine work and support.



Last picture is of the Kit stern lamps, these come in clear plastic and with a bit o paint do not look to bad.
Still to remove plastic supports and add Dafi's brass one's.



Frank.

The poop deck kept my attention today, having planked it I started putting Dafi's eyelets/kevels in place.
Also the beams across the skylight.



Placed the etch skylight and you can see the beams, so thanks Daniel for the input on that.



Also working on the furniture for the Captains quarters, will not bore you with it till I have completed this section of the ship.
 
Frank
 

Added the windows at this stage.


Plus Captian Hatcher tested the Marine work.


Then it was a test fit of the masts.



All sitting comfortable.



Next its fit out the Captains quarters and start on the port side hatch's.
Fix the poop deck and then the Channels/deadeye's and chains.

No pressure then.
 
Frank. 

Cheers OC.

Well its a picture of the Captains quarters, have added more items after this picture, doors to the Galley and some smaller items.



Placed poop deck on at this stage and added some more fittings.





Then it was to the rigging I turned.
Made up heart blocks from Syren models and added to bowsprit for preventer stay's later.







Next its the port side hatch's and a clean up, then on with the channels.

Frank. 

Added the windows at this stage.


Plus Captian Hatcher tested the Marine work.


Then it was a test fit of the masts.



All sitting comfortable.



Next its fit out the Captains quarters and start on the port side hatch's.
Fix the poop deck and then the Channels/deadeye's and chains.

No pressure then.
 
Frank. 

The poop deck kept my attention today, having planked it I started putting Dafi's eyelets/kevels in place.
Also the beams across the skylight.



Placed the etch skylight and you can see the beams, so thanks Daniel for the input on that.



Also working on the furniture for the Captains quarters, will not bore you with it till I have completed this section of the ship.
 
Frank
 

Thanks OC shipmate.

Ok had ago at the stand and have from Cornwall model boats some wood supports.

They screw to the keel and are a lot stronger, just some varnish later, can be unscrewed so I can continue with my Keel holder.



Next it was the Hatch's, these were painted and sealed then fixed to the deck.
Am adding more that I made earlier so its beginning to take shape faster.



For the main hatch I made up in two parts and painted.



Then fixed to quarter deck.



Also at this time added the smaller steps behind the Mizzen mast.



More to follow.

Frank

Well started weathering the hammocks.


This stuff is clay based and can be washed off as required, once dry it stay's.
Next is the very usefull keel clamp I was on about, boy don't it make life easier.



With the boats near finished, it was time for the oars.
made these in four parts for two of the boats and three parts for the other three.


Four parts

Three parts.

Frank.

Thanks very much Bob.

It was an old kit and took some work to get the crest looking right, Dafi made new lions for his and I nearly went down that road.
But happy with it.

Next it was the ships wheel in place, made sure the poop deck was not compromised.




Added figures that may or may not be used.

Next I fitted the Bowsprit at this time.
Adding Dafi's Resin Knights head that I explained earlier how I went about this.



Rapped ropes around, for this I used black 0.65mm rope, will use also for the lower preventer stay's.


Then the marine work and support.



Last picture is of the Kit stern lamps, these come in clear plastic and with a bit o paint do not look to bad.
Still to remove plastic supports and add Dafi's brass one's.



Frank.

Cheers OC.

Well its a picture of the Captains quarters, have added more items after this picture, doors to the Galley and some smaller items.



Placed poop deck on at this stage and added some more fittings.





Then it was to the rigging I turned.
Made up heart blocks from Syren models and added to bowsprit for preventer stay's later.







Next its the port side hatch's and a clean up, then on with the channels.

Frank. 

Cheers OC.

Well its a picture of the Captains quarters, have added more items after this picture, doors to the Galley and some smaller items.



Placed poop deck on at this stage and added some more fittings.





Then it was to the rigging I turned.
Made up heart blocks from Syren models and added to bowsprit for preventer stay's later.







Next its the port side hatch's and a clean up, then on with the channels.

Frank. 

Added the windows at this stage.


Plus Captian Hatcher tested the Marine work.


Then it was a test fit of the masts.



All sitting comfortable.



Next its fit out the Captains quarters and start on the port side hatch's.
Fix the poop deck and then the Channels/deadeye's and chains.

No pressure then.
 
Frank. 

Thanks very much Bob.

It was an old kit and took some work to get the crest looking right, Dafi made new lions for his and I nearly went down that road.
But happy with it.

Next it was the ships wheel in place, made sure the poop deck was not compromised.




Added figures that may or may not be used.

Next I fitted the Bowsprit at this time.
Adding Dafi's Resin Knights head that I explained earlier how I went about this.



Rapped ropes around, for this I used black 0.65mm rope, will use also for the lower preventer stay's.


Then the marine work and support.



Last picture is of the Kit stern lamps, these come in clear plastic and with a bit o paint do not look to bad.
Still to remove plastic supports and add Dafi's brass one's.



Frank.

The poop deck kept my attention today, having planked it I started putting Dafi's eyelets/kevels in place.
Also the beams across the skylight.



Placed the etch skylight and you can see the beams, so thanks Daniel for the input on that.



Also working on the furniture for the Captains quarters, will not bore you with it till I have completed this section of the ship.
 
Frank
 

EXERCISE of the great guns.
 
1st. Silence.
2d. Cast loose your guns.
3d. Level your guns.
4th.Take out your tompions.
5th. Run out your guns.
6th. Prime.
7th. Point your guns.
8th. Fire.
 
" The man who takes care of the powder is to place himself on the opposite side of the deck from that where we engage, except when fighting both sides at once, when he is to be amid-ships. He is not to suffer any other man to take a cartridge from him, but he who is appointed to serve the gun with that article, either in time of a real engagement, or at exercise.
" Lanthorns are not to be brought to quarters in the night, until the midshipman gives his orders for so doing to the person he charges with that article. Every thing being in it's place, and not the least lumber in the way of the guns, the exercise begins with,
 
1st. Silence.
At this word every one is to observe a silent attention to the officers.
 
2d. Cast loose your guns.
" The muzzle lashing is to be taken off from the guns, and (being coiled up in a small compass) is to be made fast to the eye-bolt above the port. The lashing-tackles at the same time to be cast loose, and the middle of the breeching seized to the thimble of the pomillion. The spunge to be taken down, and, with the crow, handspec, &c. laid upon the deck by the gun.
"N.B. When prepared for engaging an enemy, the seizing within the clinch of the breeching is to be cut, that the gun may come sufficiently within-board for loading, and that the force of the recoil may be more spent before it acts upon the breeching.
 
3d. Level your guns.
" The breech of your metal is to be raised so as to admit the foot of the bed's being placed upon the axle-tree of the carriage, with the quoin upon the bed, both their ends being even one with the other.
" N. B. When levelled for firing, the bed is to be lashed to the bolt which supports the inner end of it, that it may not be thrown out of it's place by the violence of the gun's motion, when hot with frequent discharges. See fig. 17, plate VII.
 
4th. Take out your tompions.
"The tompion is to be taken out of the gun's mouth, and left hanging by it's laniard.
 
5th. Run out your guns.
" With the tackles hooked to the upper-bolts of the carriage, the gun is to be bowsed out as close as possible, without the assistance of crows or handspecs; taking care at the same time to keep the breeching clear of the trucks, by hawling it through the rings; it is then to be bent so as to run clear when the gun is fired. When the gun is out, the tackle-falls are to be laid along-side the carriages in neat fakes, that when the gun, by recoiling, overhauls them, they may not be subject to get foul, as they would if in a common coil.
 
6th. Prime.
"If the cartridge is to be pierced with the priming wire, and the vent filled with powder, the pan also is to be filled; and the flat space, having a score through it at the end of the pan, is to be covered, and this part of the priming is to be bruised with the round part of the horn. The apron is to be laid over, and the horn hung up out of danger from the flash of the priming.
 
7th. Point your guns.
At this command the gun is, in the first place, to be elevated to the heighth of the object, by means of the side-sights; and then the person pointing is to direct his fire by the upper-sight, having a crow on one side and a handspec on the other, to heave the gun by his direction till he catches the object.
" N. B. The men who heave the gun for pointing are to stand between the ship's side and their crows or handspecs, to escape the injury they might otherwise receive from their being struck against them, or splintered by a shot; and the man who attends the captain with a match is to bring it at the word, " Point your guns," and kneeling upon one knee opposite the train-truck of the carriage, and at such a distance as to be able to touch the priming, is to turn his head from the gun, and keep blowing gently upon the lighted match to keep it clear from ashes. And as the missing of an enemy in action, by neglect or want of coolness, is most inexcusable, it is particularly recommended to have the people thoroughly instructed in pointing well, and taught to know the ill consequences of not taking proper means to hit their mark; wherefore they should be made to elevate their guns to the utmost nicety, and then to point with the same exactness and having caught the object through the upper-sight, at the word,
 
8th. Fire.
" The match is instantly to be put to the bruised part of the priming; and when the gun is discharged the vent is to be closed, in order to smother any spark of fire that may remain in the chamber of the gun; and the man who spunges is immediately to place himself by the muzzle of the gun in readiness, when, at the next word,
 
9th. Spunge your gun.
"The spunge is to be rammed down to the bottom of the chamber, and then twisted round, to extinguish effectually any remains of fire; and when drawn out, to be struck against the out-side of the muzzle, to shake off any sparks or scraps of the cartridge that may have come out with it; and next it's end is to be shifted ready for loading; and while this is doing, the man appointed to provide a cartridge is to go to the box, and by the time the spunge is out of the gun, he is to have it ready; and at the word,
 
10th. Load with cartridge.
The cartridge (with the bottom end first, seam-downwards, and a wad after it) is to be put into the gun, and thrust a little way within the mouth, when the rammer is to be entered; the cartridge is then to be forcibly rammed down, and the captain at the same time is to keep his priming-wire in the vent, and, feeling the cartridge, is to give the word home, when the rammer is to be drawn, and not before. While this is doing, the man appointed to provide a shot is to provide one (or two, according to the order at that time) ready at the muzzle, with a wad like-wise, and when the rammer is drawn, at the word,
 
11th. Shot your guns.
"The shot and wad upon it are to be put into the gun, and thrust a little way down, when the rammer is to be entered as before. The shot and wad are to be rammed down to the cartridge, and there have a couple of forcible strokes, when the rammer is to be drawn, and laid out of the way of the guns and tackles, if the exercise or action is continued; but if it is over, the spunge is to be secured in the place it is at all times kept in.
 
13th. Put in your tompions.
"The tompions to be put into the muzzle of the cannon.
 
14th. House your guns.
"The seizing is to be put on again upon the clinched end of the breeching, leaving it no slacker than to admit of the guns being housed with ease. The quoin is to be taken from under the breech of the gun, and the bed, still resting upon the bolt, within the carriage, thrust under, till the foot of it falls off the axle-tree, leaving it to rest upon the end which projects out from the foot. The metal is to be set down upon this. The gun is to be placed exactly square, and the muzzle is to be close to the wood, in it's proper place for passing the muzzle lashings. See CANNON, and fig. 19, plate VII.
 
14th. Secure your guns.
"The muzzle lashings must first be made secure, and then with one tackle (having all it's parts equally taught with the breeching) the gun is to be lashed. The other tackle is to be bowsed taught, and by itself made fast, that it may be ready to cast off for lashing a second breeching.
"N.B. Care must be taken to hook the first tackle to the upper bolt of the carriage, that it may not otherwise obstruct the reeving of the second breeching, and to give the greater length to the end part of the fall.
No pains must be spared in bowsing the lashing very taught, that the gun may have the least play that is possible, as their being loose may be productive of very dangerous consequences.
 
 
EXERCISE to EYES of a ship
 
"The quoin, crow, and handspec, are to be put under the gun, the powder-horn hung up in it's place, &c.
"Being engaged at any time when there is a large swell, a rough sea, or in squally weather, &c. as the ship may be liable to be suddenly much heeled, the port-tackle fall is ro be kept clear, and (whenever the working of the gun will admit of it) the man charged with that office is to keep it in his hand; at the same time the muzzle lashing is to be kept fast to the ring of the port, and being hauled taught, is to be fastened to the eye-bolt over the port-hole, so as to be out of the gun's way in firing, in order to haul it in at any time of danger.
"This precaution is not to be omitted, when engaging to the windward, any more than when to the leeward, those situations being very subject to alter at too short a warning.
"A train-tackle is always to be made use of with the lee-guns, and the man stationed to attend it is to be very careful in preventing the gun's running out at an improper time."
EXERCISE may also be applied with propriety to the forming our fleets into orders of sailing, lines of battle, &c. an art which the French have termed evolutions, or tactiques. In this sense exercise may be defined, the execution of the movements which the different orders and dispositions of fleets occasionally require, and which the several ships are directed to perform by means of signals.
 
It is interesting that about 1800 there was no official standardised instruction for the gun handling, this was just to be introduced years later. This usual sequence was described by Falconer.
 
To get a feeling what happens in this moments, I made a small display, which shows three different stages.
 

 
On the left the gun is aiming, the middle one loading and the right one just prior the shot before the tackles are put in flakes onto the deck.
 
7th. Point your guns.
Here we see the adjustment of the height of the gun by the handspikes. Here we can easily see the sense of the steps on the side of the carriage, it serves the handspikes as a stable support. The gun captain is giving the instructions, while the second gun captain with the blue head is ready to reposition the coin. Falconer mentions that first the height is adjusted, then the direction. The other men are busy to keep the gun steady.
 

 
8th. Fire.
Here the moment before the shot. The crew are still steadying the gun with on the tackles, these tackles are to be laid in flakes onto the deck prior the shot and then the men to retreat to a more safe area amidships. Nice detail to be seen on the Master and Commander Bonus DVD: The two men with the handspikes on the hull at both sides of the gun, ready to jump and to jam the wheels after the shot for the gun not to run back out immediately after the recoil, as the tackles are not manned jet again. 
 

 
9th. Spunge your gun.
Here the loader is sponging the barrel. One nicely to be seen the exposed position and how far the sponge points outwards. Left is the cartride ready, right the wad. Also left the shot and right the second wad. The gun captain is closing the vent with his thump as described by Falconer.
 

 
See also the tools right on the deck, the sponge, rammer, worm and the pot with water for the sponge.
 
XXXDAn

... only a little bit ...
 

 
... Jan I am so sorry I lied to you ...
 
... wasn´t intended ...
 
... did not touch it - just looked ...
 
... came off by itself ...
 
... soooooo sorry ...
 
...
 
...
 
XXXDAn

Thanks very much Bob.

It was an old kit and took some work to get the crest looking right, Dafi made new lions for his and I nearly went down that road.
But happy with it.

Next it was the ships wheel in place, made sure the poop deck was not compromised.




Added figures that may or may not be used.

Next I fitted the Bowsprit at this time.
Adding Dafi's Resin Knights head that I explained earlier how I went about this.



Rapped ropes around, for this I used black 0.65mm rope, will use also for the lower preventer stay's.


Then the marine work and support.



Last picture is of the Kit stern lamps, these come in clear plastic and with a bit o paint do not look to bad.
Still to remove plastic supports and add Dafi's brass one's.



Frank.

Added the windows at this stage.


Plus Captian Hatcher tested the Marine work.


Then it was a test fit of the masts.



All sitting comfortable.



Next its fit out the Captains quarters and start on the port side hatch's.
Fix the poop deck and then the Channels/deadeye's and chains.

No pressure then.
 
Frank. 

Looking really good there sir,  i dont know if its just me but the plastic versions do seem to be more in scale particularly the beam,   if you look across the width of the top decks the scale just looks right,  the wood kits are of course excellent in their own rights.
 
OC.

Thanks very much Bob.

It was an old kit and took some work to get the crest looking right, Dafi made new lions for his and I nearly went down that road.
But happy with it.

Next it was the ships wheel in place, made sure the poop deck was not compromised.




Added figures that may or may not be used.

Next I fitted the Bowsprit at this time.
Adding Dafi's Resin Knights head that I explained earlier how I went about this.



Rapped ropes around, for this I used black 0.65mm rope, will use also for the lower preventer stay's.


Then the marine work and support.



Last picture is of the Kit stern lamps, these come in clear plastic and with a bit o paint do not look to bad.
Still to remove plastic supports and add Dafi's brass one's.



Frank.