newbuilder101
-
Posts
870 -
Joined
-
Last visited
Reputation Activity
-
newbuilder101 got a reaction from augie in USF Confederacy by Augie & Moonbug - FINISHED - Model Shipways - 1:64
Beautifully done!
-
newbuilder101 got a reaction from GLakie in USF Confederacy by Augie & Moonbug - FINISHED - Model Shipways - 1:64
Beautifully done!
-
newbuilder101 reacted to BANYAN in HMB Endeavour by BANYAN - FINISHED - Artesania Latina - 1:60 - circa 1768
Hi folks, as promised another small update - slowly getting there. I am now working on the topmasts with only the shrouds on the foretopmast to go at this level.
I have also made a temporary cover to act as a dust cover when not working on her.
cheers
Pat
-
newbuilder101 got a reaction from Farbror Fartyg in San Felipe by newbuilder101 (Sherry) – Scale 1:96
The gun port liners are almost done, but to break up the monotony I started working on the decorative frames for the upper gun ports. The starboard side is finished and I'm almost finished the port side.
-
newbuilder101 got a reaction from Farbror Fartyg in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Finally a bit of an update!
First photo shows some shaped pieces at the bow. In my eagerness to finish and install these and the fancy trim overlay, I forgot to take pictures and these pieces are virtually hidden now!
Next up were the catheads and trim, made from basswood square stock.
I used copper sheet to cut strips and fashion the brackets that hold the catheads down.
Everything is assembled.
Then installed on the model. I used copper wire to simulate bolts.
Here's a bow shot with catheads installed and bow braces and trim pieces.
This picture shows the copper brackets blackened with liver of sulphur. I used EdT's method of soaking them in acetone first, to clean and remove any coating that may have been present. Then I dipped a small paint brush in dilute liver of sulphur and applied to the brackets in situ, followed by a water rinse - it worked like a charm!
Just a slightly different angle.
That's it for now.
-
.thumb.jpg.9b9e7a7246b971562249e229b3f2c5ad.jpg)
newbuilder101 got a reaction from Pogy647 in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Another small update.....
New additions include the vertical strips of wood on the hull mid-ship. I'm not sure of the name or function of these timbers, but I'm wondering if they could be for protection of the hull when the lowering of the ship's boats?
Also added are more ornamentation pieces, such as the eagles and the piece at the top of the gallery door.
Now to make these same pieces for the port side.
-
newbuilder101 got a reaction from DORIS in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Thank-you everyone for all the comments!
Well, an update is long overdue - I almost feel I should introduce myself again!
I struggled in the summer with which route to take for my cannons. I tried making molds and casting with resin with only limited success. The summer flew by and winter appeared and casting became a problem due to mess and allergies, or at least some reaction to the fumes. Ideally working outside is the best option, but at -20 degrees Celsius, it's not an option!
I had seen some paper cannons that Doris made and I thought I would give that a try. It would be easier if my scale was larger, but I don't find it too difficult. I know they are not perfect, but I am relatively pleased with the outcome and will continue with this process.
I am currently experimenting with weathering the cannons, so the painted one is not necessarily what the finished product will look like.
-
newbuilder101 got a reaction from edmay in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Okay Robbyn and Bob, I'll see what I can do. It will have to wait for a day or two since I need just a little time to recover from eye surgery. If I do it now with one good eye, the tutorial may be a bit "wonky".
-
newbuilder101 got a reaction from augie in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Okay Robbyn and Bob, I'll see what I can do. It will have to wait for a day or two since I need just a little time to recover from eye surgery. If I do it now with one good eye, the tutorial may be a bit "wonky".
-
newbuilder101 got a reaction from popeye the sailor in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Okay Robbyn and Bob, I'll see what I can do. It will have to wait for a day or two since I need just a little time to recover from eye surgery. If I do it now with one good eye, the tutorial may be a bit "wonky".
-
newbuilder101 got a reaction from edmay in San Felipe by newbuilder101 (Sherry) – Scale 1:96
wyzwyk: Thank-you! I can't take credit for the idea though - I owe that to a very talented builder on this forum named Doris, who does amazing things with paper and card.
Adrieke: Thank-you very, very much!
-
newbuilder101 reacted to captainbob in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Yes, Please.
Bob
-
newbuilder101 reacted to Shazmira in San Felipe by newbuilder101 (Sherry) – Scale 1:96
So......where is the tutorial for these fantastic cannons????? I want to see it!!!!
-
newbuilder101 got a reaction from NenadM in San Felipe by newbuilder101 (Sherry) – Scale 1:96
wyzwyk: Thank-you! I can't take credit for the idea though - I owe that to a very talented builder on this forum named Doris, who does amazing things with paper and card.
Adrieke: Thank-you very, very much!
-
newbuilder101 got a reaction from KevinR in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Thank-you everyone for all the comments!
Well, an update is long overdue - I almost feel I should introduce myself again!
I struggled in the summer with which route to take for my cannons. I tried making molds and casting with resin with only limited success. The summer flew by and winter appeared and casting became a problem due to mess and allergies, or at least some reaction to the fumes. Ideally working outside is the best option, but at -20 degrees Celsius, it's not an option!
I had seen some paper cannons that Doris made and I thought I would give that a try. It would be easier if my scale was larger, but I don't find it too difficult. I know they are not perfect, but I am relatively pleased with the outcome and will continue with this process.
I am currently experimenting with weathering the cannons, so the painted one is not necessarily what the finished product will look like.
-
newbuilder101 got a reaction from popeye the sailor in San Felipe by newbuilder101 (Sherry) – Scale 1:96
wyzwyk: Thank-you! I can't take credit for the idea though - I owe that to a very talented builder on this forum named Doris, who does amazing things with paper and card.
Adrieke: Thank-you very, very much!
-
newbuilder101 got a reaction from avsjerome2003 in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Thank-you everyone for all the comments!
Well, an update is long overdue - I almost feel I should introduce myself again!
I struggled in the summer with which route to take for my cannons. I tried making molds and casting with resin with only limited success. The summer flew by and winter appeared and casting became a problem due to mess and allergies, or at least some reaction to the fumes. Ideally working outside is the best option, but at -20 degrees Celsius, it's not an option!
I had seen some paper cannons that Doris made and I thought I would give that a try. It would be easier if my scale was larger, but I don't find it too difficult. I know they are not perfect, but I am relatively pleased with the outcome and will continue with this process.
I am currently experimenting with weathering the cannons, so the painted one is not necessarily what the finished product will look like.
-
newbuilder101 got a reaction from Farbror Fartyg in San Felipe by newbuilder101 (Sherry) – Scale 1:96
Thank-you everyone for all the comments!
Well, an update is long overdue - I almost feel I should introduce myself again!
I struggled in the summer with which route to take for my cannons. I tried making molds and casting with resin with only limited success. The summer flew by and winter appeared and casting became a problem due to mess and allergies, or at least some reaction to the fumes. Ideally working outside is the best option, but at -20 degrees Celsius, it's not an option!
I had seen some paper cannons that Doris made and I thought I would give that a try. It would be easier if my scale was larger, but I don't find it too difficult. I know they are not perfect, but I am relatively pleased with the outcome and will continue with this process.
I am currently experimenting with weathering the cannons, so the painted one is not necessarily what the finished product will look like.
-
newbuilder101 got a reaction from Sjors in HMS Agamemnon by Sjors - FINISHED - Caldercraft/Jotika - 1:64
Looks great Sjors! When I am finished my cannons, can I send them over for you to rig?
-
newbuilder101 got a reaction from EdT in Young America 1853 by EdT - FINISHED - extreme clipper
Your build log leaves us pretty much speechless - so we'll just say thanks for posting it!!!
-
newbuilder101 got a reaction from SawdustDave in Young America 1853 by EdT - FINISHED - extreme clipper
Your build log leaves us pretty much speechless - so we'll just say thanks for posting it!!!
-
newbuilder101 got a reaction from CaptainSteve in Young America 1853 by EdT - FINISHED - extreme clipper
Your build log leaves us pretty much speechless - so we'll just say thanks for posting it!!!
-
newbuilder101 got a reaction from GLakie in Young America 1853 by EdT - FINISHED - extreme clipper
Your build log leaves us pretty much speechless - so we'll just say thanks for posting it!!!
-
newbuilder101 got a reaction from GLakie in HMS Agamemnon by Sjors - FINISHED - Caldercraft/Jotika - 1:64
Looks great Sjors! When I am finished my cannons, can I send them over for you to rig?
-
newbuilder101 reacted to EdT in Young America 1853 by EdT - FINISHED - extreme clipper
Your comments and the 40 likes leave me pretty speechless - so I'll just say thanks.
Our Emblem ®
