vossy

I'm feel'in much better today.......the admiral thinks so too..........I'm eat'in everything in the house!      .......and I've been busy!  even with all the distractions,  I've managed to amass quite an update for ya folks!  it all started with having to recut the shaft for the paddle wheel......darned if I knew where it went.  ....and then I thought........is that the piece of dowel that the wheel frames are drying on?!?!  no matter......I have plenty of dowel    one of the connector arms was cemented on the freshly cut shaft

still thinking of what to use the connect the two arms together........while I was pondering the matter,  all of the paddle blades were painted.

the smaller holes were all drilled out to 5/64 ths.........I used a brass rod to fit them......then cut and filed to length.


the longer arms were in the paint booth being painted flat black.  they were brought to the table and drilled out as well.

off to the paint booth went the shaft and the other connecting arm.  the signage was another aspect that was in the works.   these were painted white and later sanded around the edges.   I had some darker wood,  a 1/16 x 1/16 strip.......I think it's walnut........I started to build the frame around them.

the outer sides of the longer arms is indented...........I painted inside the indention with flat red,  and detailed them with gold

yea.......nice imperfection.....huh?!?!?!  oh well.....it's metal and I can't do anything about it.   turning back to the signage,  the frame was trimmed and sanded .......then I went over it with a clear lacquer.   Murphy had to get his dig in......there was some residual red paint still in the brush.......I'm sure you can guess the rest      even though the damage was minor,  they had to be repainted.   with a CLEAN brush  they were repainted.........and when they were dry,  the decal was applied.   sorry to say.......it wasn't the decal that everyone chose......ohhhh no........Murphy I guess got miffed because I thwarted his plans,  and decided to ruin one of the chosen decals........stain or some spatter of paint....not sure.   they still look good......I used the decals that didn't have the border around the dice.

the admiral saw them later.......she didn't even notice the difference    the bow fender had been sanded........I cemented it in place on the bow.

I think I'll better be able to gauge the fairlead holes with it in place.   with everything pretty much dry,  the paddle wheel was assembled.   the paddle boards cemented in place with CA {just the outside frames},  and then touched up.  I still need to touch up the black.......forgot to do that before assembly.


 
 

First layer hull planking started.  So far this has gone pretty smoothly.  At the stern, the planks need to be twisted with the steamer, but no side bending needed so far.  I also had to put some stealers in at the stern just below the initial plank to align things between the laser cut sides and the initial plank, but they will sand/fill out.
 
Regards,
David

Initial bow and stern strips, and initial planking strip, in place.  See pic below.
 
I am posting this because I caught something at the last minute that the instructions aren't clear on, and that would have given me real problems later.
 
The way the instructions read, you mount two stern laser cut strips first, and then butt the long planking strip up against the end of the second one.  There are no instructions for alignment of the end of the second stern strip, so I just eyeballed the second one to look level with the horizontal hull structure.
 
After I had glued almost all of the long strip, I began to worry about alignment with the deck above, so looked forward in the instructions, and sure enough, the distance is critical (16mm exactly from top of strip to bottom of deck), in order to fit a photo-etched piece in.  What actually governs that distance is a set of very small notches in the frames, but they are easy to miss and I did.
 
So I pulled up the long strip (fortunately the glue hadn't completely cured), and repositioned it exactly 16mm below, using the notches I could find after the rip-up, and a ruler for the rest.
 
The way it should be done is to use a planking strip, dry-fitted under the notches, as the master guide, and align the stern strip end with that, and then finish out to the bow.  I'll do that on the second side.
 
There is no mention of the notches in the instructions, but they are obviously critical, so that's a big miss in the instructions.
 
Regards,
David

Looks great David. Those deck planks must be quite narrow? What length are you making them?
 
Cheers
 
Chris
 

I buy all my kits from Cornwall. I got my Sergal Mississippi Riverboat from them. Here in Australia that kit would have cost me about $1200 AUD when I bought it in mid 2017. I got it from CMB, delivered in 4 days to my door, for a little under $700 AUD. Same with my latest kit from there, Model Shipways Chaperon. Nearly half price. Every kit I have got from them comes extremely well packaged and arrives in under a week from half way around the world. In all honesty, I would probably never buy a kit from any where else. 100% recommend them!
 
Cheers
 
Chris
 

I only have the 1 Iwata airbrush currently, so I'm either stuck painting a big hull with an airbrush that's too small or turning to rattlecans for salvation; this time I stuck with the airbrush and while it took forever I'm happy with the results. 
 
The family and I were out wandering the 4 corners region of the American Southwest this past week:
 

 

 
...so I didn't have time to do a lot on Bissy, besides make a mess to clean up later:
 

 

 

 

 

 
Fellow Bismarck fans might notice that I've modified the spray shields in front of the three big vents on the superstructure to reflect Bissy's earlier configuration. I've also put in the PE pieces I need to integrate into the superstructure in a (hopefully) seamless fashion before I go nuts with tiny PE details. 
 
Funny thing is, I'm still only on step #3 in the instruction booklet!
 

 
Work continues on! Still on good terms with my build and not sick of it yet. 

Chris:
 
They are very narrow.  As to length -- well, I have to confess that I didn't used fixed length planks on this one.  I just ran the planking at full length, cut, ran the leftover the other way, butted in a new full length plank, and so forth.
 
Simple reason -- a huge amount of this deck will end up being covered over.  I'll likely slow down and do fixed length alternating planks on the upper decks.
 
Regards,
David

Another deck planked, mounted and varnished.  Now the model turns over and a few structural pieces go on, and then the first layer of hull planking.
 
Regards,
David

I guess this is soon enough      I just had a rather funny experience with the Progress........I took it off the table so what I did can dry  {or else I'll just keep pick'in at it  }     here is the dry fit I promised.


not cutting the outer banding on the two upper decks was a good thing to do......the tabs for the structure can't be seen.   I'm gonna try using the tulle for those vent holes.

I buy all my kits from Cornwall. I got my Sergal Mississippi Riverboat from them. Here in Australia that kit would have cost me about $1200 AUD when I bought it in mid 2017. I got it from CMB, delivered in 4 days to my door, for a little under $700 AUD. Same with my latest kit from there, Model Shipways Chaperon. Nearly half price. Every kit I have got from them comes extremely well packaged and arrives in under a week from half way around the world. In all honesty, I would probably never buy a kit from any where else. 100% recommend them!
 
Cheers
 
Chris
 

I buy all my kits from Cornwall. I got my Sergal Mississippi Riverboat from them. Here in Australia that kit would have cost me about $1200 AUD when I bought it in mid 2017. I got it from CMB, delivered in 4 days to my door, for a little under $700 AUD. Same with my latest kit from there, Model Shipways Chaperon. Nearly half price. Every kit I have got from them comes extremely well packaged and arrives in under a week from half way around the world. In all honesty, I would probably never buy a kit from any where else. 100% recommend them!
 
Cheers
 
Chris
 

Hey Steve, interesting build. Can you post a link to where you bought this model?
 
Cheers
 
Chris
 

Here's a shout out to Mr. Pucko for his comment about getting PE parts and other detail onto the ship as I go.  He's right -- the instructions don't mention it, and so I looked hard at the plan sheets, and saw that the parts are indicated there.  What's deceptive is that the very good picture book doesn't show these things installed as the build progresses.  It isn't until you get to the second book, which shows all the deck fittings at once, that they show up in the pics.  And as Mr. Pucko suggests, at that point the installation would be much more difficult because of access restrictions.
 
So here are two samples of what I went back and picked up.  And now I'll study the plan charts carefully as I build, and look for details.
 
Regards,
David
 

David, she just trumps your Titanic at 1100mm
 
Cheers
 
Chris
 

Pretty much done and dusted with the final Starboard side upper rails. Just the stairway and single rails to go. Time to turn the old girl around and complete the Port side. Still need to put the fancy deco's on the posts though.
 



Cheers
 
Chris
 

From what I have seen on other builds of this vessel those parts shouldn't be too hard to fabricate from wood. Specially for a man of your talents!
 
Cheers
 
Chris
 

I stopped for lunch guys..........aside from taking Gibbs out,  I've spent all morning on the T.D.   even the camera needed a refueling!     Brian had asked about where I'm going next with the build,  so it starts there.  the opening in the center of the third deck has a rise from the structure below,  and it must be built up.  there are vents that line the upper part of the rise...but I'll get to this later.   I'm not doing what they instruct me to do.  so it starts with the base layer of wood....the two ends and the sides.

so while this was drying,  I figured that I'd plank the deck that serves as it's roof.

as I got to the outer edges,  I saw that a full width plank wouldn't fit..........so I used a 2 mm plank strip to finish it off.

there are two holes I need to open up when I'm able to.  I went over it with a wash of stain,  wiping it off quickly......all I want it to do is cover over any unstained spots that may have shown up.  it matches well with the below deck.

later........to drill out the holes,  I clamped it to a piece of junk plywood and drilled them out with the same size bit.   on this deck is a smaller cabin structure....above that,  is another smaller deck.   I planked this one next,  staining up a couple more strips when I ran low.

they are all trimmed and sanded around the outer edges.   back on the third deck,  twelve short pieces were cut from the same wood, the base frame was made from.  they were arranged on the rise giving them spaces in between......one on the fore and aft ends as well.

the one on the fore end juts out from the shape of the base frame,  and needed to be trimmed and sanded to match the shape.

as you can see,  it was stained over to mask the sanding marks.   since the wood used didn't match,  the entire rise was stained.  it looks much better than to leave it with two different hues of wood.

I recall running out of that particular shade of gray,  that I used for the undersides of the lower decks.   since the underside of this deck will be unnoticeable,  I stained it.

checking to be sure I drilled out all of the holes,  the two smaller decks were banded with thin strip mahogany.  I washed my hands to loosen up the caked on CA,  on my fingers.

I left the banding that overlapped the slots for the structure,  just in case it would be needed.   as for the third deck,  the other holes were drilled out, leaving a couple of the slots closed,  and it too was banded.  I still need to figure out what to do about the underside,  since this deck is more like the lower decks and should be painted gray.......I need to get more paint  


I found some spare thin strips that I had stained in mahogany,  so I also finished the small cabin structure too.

I didn't bother to cut out for windows.....the lavatory doesn't need them!  privy must be the shortened word for privacy     ok....my musing is over......lunch is done........guess I'll go find something to do   

From what I have seen on other builds of this vessel those parts shouldn't be too hard to fabricate from wood. Specially for a man of your talents!
 
Cheers
 
Chris
 

From what I have seen on other builds of this vessel those parts shouldn't be too hard to fabricate from wood. Specially for a man of your talents!
 
Cheers
 
Chris
 

From what I have seen on other builds of this vessel those parts shouldn't be too hard to fabricate from wood. Specially for a man of your talents!
 
Cheers
 
Chris
 

From what I have seen on other builds of this vessel those parts shouldn't be too hard to fabricate from wood. Specially for a man of your talents!
 
Cheers
 
Chris
 

work'in my way back to it.   I also want to do something with the windows and doors......I really don't want to use those metal parts.   I see them in the instructions, and I think .......yuck!   I still need to finish the cabin on that level as well....one end still needs to be planked.  more to come soon   
 
thanks for look'in in   

How's the problematic staircase going Pop? Nice work on the decks to mate!
 
Cheers
 
Chris
 

How's the problematic staircase going Pop? Nice work on the decks to mate!
 
Cheers
 
Chris
 

Stunning to think you made this from card Dan! Well done. Looks super.
 
Cheers
 
Chris