-
Posts
5,115 -
Joined
-
Last visited
Reputation Activity
-
RGL got a reaction from BANYAN in HMB Endeavour by RGL -FINISHED - Artesania Latina
The fore and main yards. Several days to strop all the blocks required. Now I have to get the Stirrups and footropes right before lashing them. I think I intend to finish all the yards (11 of them) first so I can work from Bow to stern, low to high. The only blocks missing here are the lower tackle block.
-
RGL got a reaction from robin b in HMB Endeavour by RGL -FINISHED - Artesania Latina
The fore and main yards. Several days to strop all the blocks required. Now I have to get the Stirrups and footropes right before lashing them. I think I intend to finish all the yards (11 of them) first so I can work from Bow to stern, low to high. The only blocks missing here are the lower tackle block.
-
-
RGL got a reaction from UdoK in HMB Endeavour by RGL -FINISHED - Artesania Latina
Two weeks work, and pretty much the last of the woodwork, Spars and yards done.Lots and lots of blocks and ropes to go. What's the best way to make stirrups?
-
RGL got a reaction from kiwiron in HMB Endeavour by kiwiron - FINISHED - OcCre - 1:54
I kinda went strait off the AOTS if you have a look at my log. I've also got Parkinson's reference if you want me to PM a photo? It's different.
-
RGL got a reaction from kiwiron in HMB Endeavour by kiwiron - FINISHED - OcCre - 1:54
Looks very very neat! Are you going to drill holes for the anchor cable to go into the hold?
-
RGL got a reaction from edmay in HMB Endeavour by RGL -FINISHED - Artesania Latina
Two weeks work, and pretty much the last of the woodwork, Spars and yards done.Lots and lots of blocks and ropes to go. What's the best way to make stirrups?
-
RGL reacted to clearway in HMS Dreadnought by clearway - Zvezda - 1/350 scale - PLASTIC - with upgrades
Ty Ian- the track is peco code 100 track. The tinlets are stored upside down as it stops a skin forming on the paint.
Keith
-
RGL got a reaction from Captain Slog in HMB Endeavour by RGL -FINISHED - Artesania Latina
Two weeks work, and pretty much the last of the woodwork, Spars and yards done.Lots and lots of blocks and ropes to go. What's the best way to make stirrups?
-
RGL got a reaction from olliechristo in HMB Endeavour by RGL -FINISHED - Artesania Latina
Now the updates.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Ok, repairs continue after the cat tipping incident. The back end of the bus! I have used Chuck's fantastic lantern kit. Next back to the front of the bus to fix up the anchors.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
OK, pointy end of the ship done finally. I've pretty much replicated the AOTS for all the stays and running rigging.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Last post of the year I promise! Bit of serendipity today as I actually read the plans and looked at the replica and the Topgallant shrouds have no ratlines! I'm finished with them! Shrouds and backstays in place. Lots of work on the bowsprit before I can add the last stay. next year it is.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Mizzen topmast stays. This was the most difficult as the thimble that goes on the end of the stay had to be put on whilst it was rigged. fat fingers and backstays do not mix. Now to have some fun and rig the blocks under and over the shrouds.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
The mainmast topmast stays. Its starting to look like a real ship finally.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Breast backstays. The backstay needs to be separated at the mast, thus the little jig so it allows me to ensure the blocks are even on each side, and allows them to be served on. Tye tackle next, then backstays and stays.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Slowly fitting the topmasts. I just have to glue in the mast tops and align it properly before setting it for good.
I had to include the tackle first as the shrouds will run over the top of them so they fall in a single line thus it has to be spliced. The double blocks are Chucks from Syren, drilled out a bit and filed along the sheeve lines to give a little more definition.
shrouds next, then numerous backstays, then stays over the top, Then I'll have to worm the jeers up between them so they hang under it all.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
I thought I had just about completed the lower masts. I completed the Futtock Shrouds and hooks with ratlines, made up my Euphroes and crows feet using some 2mm blocks, (the crowsfeet will need some wax as they're fuzzy0. I discovered that i forgot a Mizzen Stay which is painful as it will be fiddly serving it.
After I fix this, what do you normally do next? Which mast in what order?
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Tops attached. Finally coming together.
-
RGL got a reaction from kiwiron in HMB Endeavour by RGL -FINISHED - Artesania Latina
Lower ratlines Complete after several days of non stop sewing.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Standing rigging continued. Shrouds finished off sans ratlines. next is to add the shroud cleats.
-
RGL got a reaction from piperjoe in HMB Endeavour by RGL -FINISHED - Artesania Latina
Considering there has been a flurry of Endeavours, I thought I'd do an update! Standing rigging (shrouds) in progress. I intend to stain all the shroud rigging black like the replica. I intend to utalise all the mast tackles by having a longboat run out from the yards (Thus the gap).
-
RGL got a reaction from BANYAN in HMB Endeavour by RGL -FINISHED - Artesania Latina
Two weeks work, and pretty much the last of the woodwork, Spars and yards done.Lots and lots of blocks and ropes to go. What's the best way to make stirrups?
-
RGL got a reaction from olliechristo in HMB Endeavour by olliechristo - Artesania Latina Kit - 1:60 - kit bash/rehash
Dude, I started my Endeavour in 2000 when I lived in Cairns, I get annoyed, and I put it away. I did the frames when my youngest boy was born in 2005, it's now 2014, I've started on the yards. NSW finally beat Qld this year. It's the process, not the finish. It's that bloody cold here in Canberra, you cane toads can do it!
-
RGL got a reaction from robnbill in HMB Endeavour by RGL -FINISHED - Artesania Latina
The cat and I do not talk and the ship is now stored where she can't get to it. I have one more bit of repair work on the hull where it bounced off the piano then I can finally start on the spars.