Jump to content

Walter Biles

Members
  • Content Count

    409
  • Joined

  • Last visited

About Walter Biles

  • Birthday 12/26/1947

Profile Information

  • Gender
    Male
  • Location
    Bagdad, AZ
  • Interests
    Modeling, Prospecting

Recent Profile Visitors

868 profile views
  1. Thank you Michael. I had pretty much lost interest just after Linda died, but have finally started regaining my interest. I hope you and your family had a nice holiday season this past few months. Did you ever get that engine made you were working on before I left?
  2. I am back. I have been working hard on my Design CAD to get everything updated in 2D. My frames are much better fitting than before, and I just need to finish up the ones between the Sections. My different drawing plans agree much better than they ever did before. I'll be back soon when I can start building again.
  3. Hi Vivian, I just got a notice that you liked my post way back. I sure hope that means you are getting well again.
  4. Popeye, yes, Blue Jacket America is the plans I got on the 1/4" scale, and I had hoped to get the frame built and get ahold of the kit one day, and use the kit parts to do all the finishing. When I saw the old kit on there, I figured I might get most of what I wanted from that. The bid closed about 10 minutes before I got back online to follow it out. $375 is a lot of money for the new kit. From what I have seen of those frames, the grain all runs side to side on all of them, I can't see unless they are plywood, how they would hold up to the building. I had intended to make them all in a 7 part frame each such as the real ones would be. I figured if I could get a CAD model plan drawn, that once I build the 1/4" scale one I might do one in nearer to 1/2" scale for RC. I really prefer my models built as much like the real ones as I can. I found out early on, that I did not like staying alone. I invited my younger sister to come here to live. She is on disability, and never could afford a place of her own. We get along pretty well, and seem to tolerate each other quite well. She appreciates the freedom to live here. As a non-cook myself, but a fair house keeper, we each have skills to give.
  5. Hi, Popeye, No, since Linda's passing, I have still been overwhelmed by work to catch up here at the house. Also, I bought a 10" parabolic mirror and have also been preparing to make a telescope with 2" eyepiece adjuster, to study some stars. I still need to finish the modification to my garden tractor bucket, and get the shop cleared out of excess stuff. During the kids screening what they wanted from their mother, my shop got filled back up with stuff. I am slowly digging out. I put an Ebay bid on one of the older America BJ kits to get the frames to check against mine, but I got outbid at the last of the bid time. I had really hoped that with that old kit, I would be able to supply the boat I'm making with the deck furniture and rigging. OH WELL!
  6. Thank you all for your likes and concerns. I will be back when I can. I had the boat frames all ready to start building, and the material. As soon as I can get myself back together with my mental capacities and readiness to build, I will be seeing you all again.
  7. Thank you Mark, I appreciate your thoughts, and thank you, and the later part of your comments are pretty much in line with what I plan to do.
  8. Patrick, Thank you so much. She was in so much pain, and she has it no more, and is, in our belief, in a much better place now. Knowing this I can only be sad for myself, and I must go on for our family's sake. I will recover, and be back when I catch up on putting my home back in order. I am making a lot of adjustments to reduced income, and revising my values on day to day needs. It will take time, but I will make it. Walt
  9. Due to the deterioration of my wife and her eventual death in early September, I have been unable to work on this or any other boat for the last few months. I have been clearing out and cleaning up my home with the help of one of my sisters, and trying to re-adjust to my life as a widower. I have made some progress on the house. I will come back to it when I can.
  10. There is quite a bit of research information at the top of the heading banner under Articles Database. That is a library of sorts of information that is free to use. You would also find links to lots of information, calculators, and various other things there which could be of interest to your search.
  11. Is that a koala bear on the bow? My eyes are not that good since I dropped my glasses on the patio, a bad case of road rash. Excellent work.
  12. I have finally started on my boat. I cut my timbers for the Keel yesterday, and got them glued and clamped. I started back through my frames, and am doing another check and refinement, really close up this time. I am cleaning out the bits and pieces of lines and making sure each side matches the other in all respects, but I am finally almost ready to start framing when I finish this close examination. The framing calls for them being set into notches in the deadwood, and I am going to pin through all the separating blocks to keep them from splitting on the grain. Each pin will go through into the keel parts proper to tie them into the keel, and also be the pins through the keel splice joints. I may be ready for some pix soon. I am just taking my time and working hard to meet each potential problem before it comes one.
  13. I finally now have 31 frames done, I think. I am still checking them over. I am just about ready to cut the keel so I can put the frames into it as I get each one done. The last 5 were the hardest to get right around the aft end of the hull. I am going to allow some spare material to the inside of each frame to make it so I will be able to sand each one to the fore-aft side taper. I am going to use stock that is half the thickness of the frame, and cut them to fit the ends where I will overlap each with the material on the opposite side, then cut them out on the band saw according to the pasted on pattern. I forget exactly where I saw this method done, but I remember how it was done. I will be using wooden tooth picks for pinning the frames. I will post some pix as I get something to show.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem

Modelshipworld - Advancing Ship Modeling through Research
×
×
  • Create New...