Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

Jared

NRG Member
 View Profile  See their activity

  • Posts

    233

  • Joined

  • Last visited

 Content Type 

Everything posted by Jared

  1. Jared
    Completed the footropes on lower fore and main yards. To get them to hang properly I treated them with diluted white glue and weighed them down with small copper clips. A light coat of black paint was also applied.
  2. Jared
    Today I tackled the lower forestay, which was a bit of tricky work involving rigging through bullseyes in a tight space and siezing the rope.
  3. Jared
    Have now finished the lower yard on the mizzen mast. It turned out to be an exercise in frustration. The choice of using basswood in the kit for the yards was a bad one IMHO. The narrower yards become quite fragile especially near their ends, once the various holes are drilled. My mizzen lower yard broke about 1/3" from one end, where I had drilled 2 perpendicular holes for 4 eyebolts. I twice tried gluing the broken end back on using a combination of super glue and yellow wood glue, but it kept breaking off. The third time I went to epoxy glue and this seems to have worked.
  4. Jared
    Thank you 😄
  5. Jared
    Have completed the lower yards on the forecast and mainmast, and temporarily mounted them on the model. Its finally starting to look like a tall ship. Correction: The eyebolts I inserted at the ends of the lower fore and main masts are wring and have been removed. They are meant to go on the ends of the topsail yards only, to secure the Flemish horse footropes see fig. 88 in kit's manual). Foot ropes not added yet.
  6. Jared
    For the remaining stunsail bearling yards I decided to greatly simplify the construction of the stunsil irons. The way I did it in #189 above was a real pain because of the small brass wire between the 2 rings. It is much easier to solder the 2 rings together and not add the pin (see photo). The weld is much stronger and, at this scale, basically looks the same.
  7. Jared
    I have completed the lower yard fittings. After doing the jackstays' I now realize I could have been an orthodontist! All that remains now before mounting the yard is to add the footnotes, make the pin for the truss and painting everything black.
  8. Jared
    Made some interesting progress over the last 2 days. One of my biggest concerns with this model was having to construct the required iron fittings on the masts, in particular the lower yard truss and the stunsail irons. I don't have a lot of experience working with brass or soldering very small parts. Happily I can report that these parts were much easier to build than what I expected. The attached photos show the results so far. I basically constructed everything using brass strips, brass rod and brass sheet, more or less following the drawings in the kit. I can provide more detail if wanted.
  9. Jared
    Thanks George. I think it is quite complex as I looks from fig. 104 in the instruction book that the bottom of the stunsail sails were attached to the stunsail boom which extends or retracts as I described earlier, while the top of the stunsail sail attaches to a stunsail boom that is hauled up be a halliard. I am planning to install the stunsail booms only, in the retracted position.
  10. Jared
    I wanted to show better quality images of the ratlines than the phone images I posted 2 days ago. Shot with a Nikon D850 on a tripod. The second image was focus stacked from about 30 images to show everything in sharp focus.
  11. Jared
    While most of my yards have been turned on a mini lathe I have not started to add the various fittings to them yet. I am going to start this now to as I continue with the standing rigging. Looking ahead at the yard plans (see attached photo) I have a question about the operation of the Stunsail yards. The photo show their stowage position on the top left and their extended position on the top right for when in use. My question is how these yards were moved from the stowage to extended positions and vice versa. Were they moved by rigging or by the more basic "arm strong" method? Thanks.
  12. Jared
    Thanks for your encouraging feedback. I have no shortage of camera gear and really should be using it as I did earlier in this log (see page 1).
  13. Jared
    Made good progress over the last 3 days and completed all the lower ratlines on the port side. One of the best things I found with the sewing method was how easy it can be used to fix (replace) individual rungs that don't quite look right. I have noticed wide angle distortion in some of my photos which gives the appearance of the masts and mast tops looking out of alignment with each other. Please ignore.
  14. Jared
    Thank you.
  15. Jared
    Have now completed the ratlines on lower main and mizzen masts on the starboard side. Really like the sewing method.
  16. Jared
    Thanks George and ClipperFan. I have just completed the ratlines on the lower forecast stbd. side. I decided to not worry about putting ratlines or not behind the futtock shrouds. The shrouds are all so close together there I don't think you would ever see them if they had been mounted. The finished assembly with 2 of the intermediate stages are shown in the 3 attached photos. I printed a pattern with 10.5 line spacing units in Excel and clamped different sized pieces to the back of the shrouds. Using the pattern it was easy to sew my way through the shrouds, maintaining a straight line. As described in George's blog (pg. 15 I think), every 6th ratline extended across all 6 shrouds, the others only crossed shrouds 2-6 (counting from fore to aft). I found it best to sew all the threads in place and not adjusting them for tightness until all we're in place. I used dilute white glue with a drop of detergent to fix all the ratlines in place. I then cut off the excess thread at the ends of each ratline. For the ratlines on the metal futtock shrouds I simple glued the thread across the shrouds. When dried in place I tied a small knot at each end then cut off the excess thread.
  17. Jared
    My preference would be to captain the ship so I wouldn't ever have to do any climbing 🤣
  18. Jared
    Thank you. It makes sense. It would be a rather tight squeeze I would think to climb up behind the futtock shrouds!
  19. Jared
    I started working again on my ratlines a couple of days ago, after a week of unscheduled rest due to an unplanned bout if covid. Fortunately it was mild. I am using the mercerized cotton thread that was recommended by George (much nicer to work with than the thread I had been using, all of which I removed from my model. I experimented with the sewing needle method Rich recommended and really like it. I will update my progress once I have completed one of the lower masts. My question for the group is how high up the shrouds on the lower mast should the ratlines go? The kit instructions are not overly clear. It looks like they only go up as far as the lower end of the futtock shrouds, and not behind the futtock shrouds. Instead it looks like attach to the futtock shrouds and continue up to the top. Have I got this right? I have quite a few books on rigging and model ship building and not one shows a clear drawing or photo. I also looked at some of the build log photos of others but am still a bit unclear on this. Thanks for your help as always.
  20. Jared
    Thanks. That is an interesting approach. It would certainly simplify aligning the connecting rungs. When I receive some mercerized cotton thread I ordered I will experiment with this technique and George' and see which works best for me and looks best. Having limited vision in one eye and consequental loss of 3d sense, elimination of knot tying is certainly an attraction! Thanks for everyone's helpful suggestions and thoughts. Jared
  21. Jared
    Thank you. What do you mean by "threaded the ratlines rather than tied them off"? Thanks George. For the ratlines I was using black polyester thread from my wife's sewing basket. I will get some cotton thread.
  22. Jared
    I have a question for the group. The Flying Fish plans show the rope diameters for the shrouds and ratlines on the foremast as being 10.5 and 1.5 inches, respectively. That works out to be 0.035" and 0.004" at scale. I started the ratlines using very thin black thread line but don't like how it is looking (see photo). Thevthread is very difficult to work with and I think it looks too flimsy on the model. It is also near impossible to get it to appear linear. I have had to stiffen it with white glue to reduce the ratline waviness. The topmost ratline in the attached photo was made with a much thicker/stiffer black sewing thread. It is only fitted temporarily on the ratlines so the knots are not overly tight or small. It is easier to work with and I think it will look better, but not to scale. I would appreciate your thoughts and suggestions. Thanks
  23. Jared
    All lower shrouds have now been lashed to the deadeye and sheer boards. Getting the deadeyes to all line up was quite tricky and required more than one try for several of them.
  24. Jared
    Thanks George. I fully agree with your ratline suggestion.
  25. Jared
    Thanks for all the feedback. Over the weekend I discovered Ashley's book of knots. In this encyclopedia of nautical knots he mentioned that the ratlines were lightly tarred. Work on the model is progressing painfully slowly. I managed to lash all of the lower formast shrouds in place. Patience is the name of the game!

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...