Wintergreen
-
Posts
940 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Wintergreen
-
And how is the build going Keith? 😉 😄 😄 (Note, I do not mock anyone for their respective take on EV:s! I myself drive a RAV4 pluginhybrid with much joy and I do not appreciate Greta being Swedish)
-
It has an intriguing hull form with the bulbous section just aft of the center. Nice planking and sanding. Keep it up!
-
I agree on EdT:s build logs as a fantastic source of information. I bought the first Naiad book only for the tools and drafting sections in it. He didn't use scales, instead he used the profile plan and took heights from it directly. The plan was mounted on a board with a ledge representing the bottom line. Framing is a lengthy process. It feels it will never end, and then all of a sudden all frames are in 😉 How is that wood for sanding? I used apple, which I knew would be tedious, but there was less risk of sanding too much. Keep it up!
- 88 replies
-
- 4
-
-
- Vigilance
- Sailing Trawler
- (and 1 more)
-
Thank you! Yes, the two sisters gets a baby sister. So, three of hearts I guess. 🙂
-
Well, if so, it is a learning experience as you've already stated 😉 From what we can see of your photos you will be just fine. Don't rush it though, that's never a good idea. Keep it up!
- 54 replies
-
- 3
-
-
- ancre
- La Mahonesa
- (and 1 more)
-
Thanks for the insight Andy and my lips are sealed 😉 Yes, I recognize the make. My next tool will probably be a disk sander though. How's that rabbet going?
- 88 replies
-
- 4
-
-
- Vigilance
- Sailing Trawler
- (and 1 more)
-
Oh, I love babies! (especially when you can hand them back to their parents if they get smelly 😄 ) Two of our grandkids are moving away in May, but the other family is still producing. Next one is due in early June 🙂 Oh, and by the way, nice progress Keith!
-
As neat and tidy as ever Ron! Keep it up!
-
Glad to be of inspiration Andy 🙂 It is a learning curve for me too. I have found out that the first attempt is usually decent, but no 2 goes in the bin because it is done in somewhat of a hurry. Then you settle down and let it take the time it takes and the rest is good as well. For time it takes. Lovely marking gauges you got there. I'm pondering over miniature tools now and then. Apart from being enourmusly pretty, are they useful?
- 88 replies
-
- 4
-
-
- Vigilance
- Sailing Trawler
- (and 1 more)
-
What a nice build you've got going here Andy! I'm glad to have found it. The similarities between our builds are quite striking, however, you go into much greater detail in keeping to the original than I do. Hats off for that, sir! On the other hand of course they are similar! Atlantica is a scaled up version of a British smack built 1903 in Porthleven, which is basically just around the corner from Brixham 😄 So, I'll grab a seat a little to the side here. Is the popcorn machinge functional or do I bring my own?
- 88 replies
-
- 4
-
-
- Vigilance
- Sailing Trawler
- (and 1 more)
-
Soo, this was a funny little piece to piece together, piece by piece, so to say. All dovetails and pins handcut with jewellers saw and filed to fit. It is the forward hatch and stairway just aft of the main mast. I decided to give it a wash of staining to dampen the quite white appearance of it. In order to match I sanded the main hatch coaming also and applied a wash to it too. When dry I will give it a quick touch up with 320 grit paper and apply a couple of layers of laquer. The bottom edge is sanded to the same rise as the deck beams so I used the top edge as index when mating all the corners. The two small blocks in the upper right corner (one with an arrow) was used to get the right size of the openings, and also keep things fair and square. Here it is still moist after the staining hence the quite dark colour. It is not glued in place yet either. The real deal was through bolted from top down through the deck beams. I will not bother with that. I know my limitations (I think). 😉 Cheers guys!
-
And proud of it!! After all, I'm of viking heritage 😝
-
What do I know?? I don't fancy either of 'em 😄
-
You've done a convincing job with the lids I'd say. They blend in perfectly with the hull 🙂 Keep it up!
- 635 replies
-
- 3
-
-
- Indefatigable
- Vanguard Models
- (and 1 more)
-
Thank you lads! Yes Andy, I too like the lines. Always have. And the cold is done and dusted now as you've guessed B.E. John I think you better keep an eye on you Marmite stock, I'm sending the Admiral down to your side of the globe next week. NZ though, but you never know 😉
-
Silly posts or not, it would of course be possible to do the tail piece using a lathe and controlled bed. It would take two clear passes with the dovetail bit. The pins, not so much because you get a rounded inner surface. Anyway, I only have a wood lathe and no usable index table (and no dovetail bit of mini size) so hand tools it is. The coaming came out pretty neat. Here it just sits in it place, not glued in. Two coats of water base matte lacquer applied to the sides. And finally a perspective picture of the build. As usual with all the debris in the background 😄 Pax et bonum!
-
Welcome back Mark! It is quite apparent that you enjoy the drawing business. Also, knowing that you are lefthanded means that you probably (but not necessarily) is quite apt at the artistic side of drawing also, and not only the engineering side. (We discussed work benches a long time ago and I envied, still env, your lefthand adapted work bench). Also, I like the reasoning about the false floor in the quarter galleries. It is just on another level of interpreting the original drafts and applying them to a somewhat virtual reality in 1:64. I hope that your nerves get back in working order and so, Keep it up!
-
Wow, that is next level stuff right there. Next up we will se frames with intarsia on the walls depicting some well known battle 😄 Keep it up!
-
Well thank you Gary @FriedClams 🙂 I totally agree that it is not possible to follow everything here on MSW, there are just too many excellent builds going on all the time. And yes, cancer can really give you mental ghosts to follow you along. But, being in my mid 50's I am focusing on living many years still! Cheers to you too and all the best!
-
Very nice planking indeed. And I'm with John and Andy about the stern planking. Flush with the timber. On my build the stern bulges around the prop shaft also. Flush planking gives hydrodynamically benefits of less drag due to the turbulence that step creates. Keep it up!
-
That's excellent Tim! What RPM do you get? I found out that higher RPM gives smother work. I have a similar contraption on my wood lathe, probably around the 3000rpm mark with a drum that is about 4" in diameter.
-
Yup, it's a good feature that brain language isn't recorded anywhere outside said brain 😄 Very convincing deck, me like. Keep it up!
-
Yeah, space and tools... but on the other hand, learning to do it with less is beneficiary to the skill level in the long run 😉 Nice job so far. Keep it up!
- 54 replies
-
- 5
-
-
- ancre
- La Mahonesa
- (and 1 more)
Our Emblem ®
