cabrapente Posted March 13, 2013 #1 Posted March 13, 2013 July 18, 2011. I start the master section. aviaamator and popash42 2
cabrapente Posted March 13, 2013 Author #2 Posted March 13, 2013 this time, for the deck planking I stuck a black felt the cedar plank, and after the short. out much better. Archi and popash42 2
cabrapente Posted March 13, 2013 Author #3 Posted March 13, 2013 Also, for the beams go all the same, I did a little longer, the fasten with battens glued on their heads, and tomorrow I sand them and give them all the same curve. then, cut ... aviaamator and popash42 2
cabrapente Posted March 13, 2013 Author #4 Posted March 13, 2013 a belle, only leads filler. section but, I'm giving lasur background. which is a wood preservative, and when I finish, I'll give sealer. fortunately, all are original wood scraps and meeting tables. to the keel, keelson and beams, oak. lining, iroko. shell, cherry. deck planking, cedar. walnut masts. Ebony and tapes. mood is not so fierce as they paint the lion. a greeting.
cabrapente Posted March 13, 2013 Author #5 Posted March 13, 2013 August 2011. making mini pulleys and almost finished the shell aviaamator and popash42 2
cabrapente Posted March 13, 2013 Author #6 Posted March 13, 2013 I start the planking aviaamator and popash42 2
cabrapente Posted March 13, 2013 Author #12 Posted March 13, 2013 I could remove the rollers, if break lining. to try them again, departed forever. and when heated, by rubbing strawberry swell and burst. after several attempts, I tried on a larger piece, once made the grooves, just have to cut it to size. has come to the first popash42 1
cabrapente Posted March 13, 2013 Author #13 Posted March 13, 2013 I put the pump box and the bulkhead. the small hatch is stuck. the other can be removed popash42 1
cabrapente Posted March 13, 2013 Author #14 Posted March 13, 2013 I have no ebony, and tables made of walnut edging. after I gave black wax,. put the scree and the barrel popash42 1
cabrapente Posted March 13, 2013 Author #15 Posted March 13, 2013 October 2, 2011. I think it is finished. muzzleloader, popash42, Ainars Apalais and 1 other 3 1
bbrockel Posted March 14, 2013 #16 Posted March 14, 2013 That is one very fine cross section build. Congratulations. Did you draft the plans yourself? "I've told you a million times, don't exaggerate " Current builds: H.M.S. TRITON Cross Section by Bbrockel - Scratch Build - Scale 1:48 US Brig Syren by Bbrockel - Model Shipways -Scale 1:64
mtaylor Posted March 15, 2013 #17 Posted March 15, 2013 Beautiful work on building this. Very well done. Thanks for sharing it. aviaamator 1 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
AnobiumPunctatum Posted March 15, 2013 #18 Posted March 15, 2013 Really nice section model. Did you not build a full hull model of this small vessel? Regards Christian Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36 On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777 Paused: HMS Triton, 1771 - 1/48 "Have no fear of perfection - you'll never reach it." Salvador Dali
popash42 Posted November 17, 2021 #19 Posted November 17, 2021 Dear cabrapente you have done excellent work and the result is beautiful 😍
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now