Jump to content

Zeehaen by Jack H - 1:48 - a 17th century dutch merchant ship - admiralty model by CNC


Recommended Posts

Hello everyone!

This is my first build log for ship-model building, The Zeehaen, a 17th century dutch merchant ship.

The primary references is 17th CENTURY DUTCH MERCHANT SHIPS(by Ab Hoving) and Shipbuilding in the Dutch Golden Age. The reason for choosing zeehaen is it seems simple but a bit special, and the carving patterns are relatively simple for me to practice. Cor Emke's plans are not suitable for a full frame ship model, but I like some challenging making, although I find I think too simple at first- my 3D building process seemed to hit a brick wall, I can't get any reliable reference of internal structure on the stem and stern. so I finally changed my mind and took Mike Y's advice- start my log while the project is not yet completed. Perhaps someone can provide more accurate internal structural drawings to correct my mistakes, in addition, I also make a presentation of my making methods- Almost all parts were designed by 2D/3D and output to CNC processing.

 

This is current progress

post-3935-0-08124600-1482557302_thumb.jpg

post-3935-0-90047600-1482557306_thumb.jpg

post-3935-0-83960500-1482557327_thumb.jpg

post-3935-0-56611400-1482557329_thumb.jpg

post-3935-0-24763600-1482557337_thumb.jpg

post-3935-0-13587900-1482557352_thumb.jpg

post-3935-0-67893800-1482557338_thumb.jpg

post-3935-0-69806000-1482557655_thumb.jpg

 

The frames from k#-35# using 2D cutting

post-3935-0-51030600-1482557809_thumb.jpg

post-3935-0-78006400-1482557868_thumb.jpg

post-3935-0-91804200-1482558044_thumb.jpg

 

Assembly process

post-3935-0-87787400-1482558292_thumb.jpg

post-3935-0-36386300-1482558036_thumb.jpg

post-3935-0-90956100-1482558107_thumb.jpg

post-3935-0-20030000-1482558129_thumb.jpg

post-3935-0-62783500-1482558155_thumb.jpg

post-3935-0-98818800-1482558191_thumb.jpg

post-3935-0-07915500-1482558222_thumb.jpg

 

Keel and some special-shaped parts using CNC double-sided milling processing

The "V slot" was  processed directly by CNC.

post-3935-0-78766300-1482559276_thumb.jpg

post-3935-0-26567100-1482559701_thumb.jpg

post-3935-0-27464100-1482560779_thumb.jpg

post-3935-0-13615300-1482560783_thumb.jpg

post-3935-0-44623400-1482560790_thumb.jpg

 

post-3935-0-95751400-1482562994.jpg

post-3935-0-69788300-1482563015.jpg

post-3935-0-95451000-1482563024.jpg

post-3935-0-43854000-1482563030.jpg

 

even so tiny parts were processed by CNC

post-3935-0-79551800-1482560986_thumb.jpg

post-3935-0-32382400-1482560962_thumb.jpg

 

post-3935-0-24367800-1482561311_thumb.jpg

post-3935-0-98818800-1482558191_thumb.jpg

post-3935-0-18449200-1482561350_thumb.jpg

post-3935-0-05442800-1482561340_thumb.jpg

post-3935-0-35650500-1482561109_thumb.jpg

post-3935-0-75627300-1482561098_thumb.jpg

post-3935-0-41617300-1482561080_thumb.jpg

post-3935-0-94382600-1482561091_thumb.jpg

 

The Building jig

This kind of jig is recommended by my friend, wangshuoliurui,as a senior shipmodel builder in china. I think this kind of jig is more suitable for those hull in 17th Century.

post-3935-0-16358800-1482561963_thumb.jpg

post-3935-0-62635100-1482561969_thumb.jpg

post-3935-0-93826300-1482562080_thumb.jpg

 

Some experiments of figurehead or figurine carving patterns were designed by 3d and processed by multi-axial CNC .

post-3935-0-14150200-1482563355.jpg

post-3935-0-45902300-1482563358.jpg

 

3Dmodel was build by rhino, This requires accurate size.

post-3935-0-10553700-1482563372.jpg

 

Convert the model into polygon format

output to zbrush and sculpt it by virtual technology

post-3935-0-01556100-1482563507.jpg

 

CNC programming and machining.

post-3935-0-31531500-1482563386_thumb.jpgpost-3935-0-57751300-1482563400_thumb.jpg

 

 

 

 

 

post-3935-0-06307500-1482558175_thumb.jpg

post-3935-0-67908500-1482561102_thumb.jpg

post-3935-0-78195900-1482561294_thumb.jpg

post-3935-0-48859200-1482562823_thumb.jpg

post-3935-0-24996800-1482562983.jpg

Link to comment
Share on other sites

Wow, that looks like a very interesting project. I will follow with interest.

Regards Christian

 

Current build: HM Cutter Alert, 1777; HM Sloop Fly, 1776 - 1/36

On the drawing board: English Ship Sloops Fly, 1776, Comet, 1783 and Aetna, 1776; Naval Cutter Alert, 1777

Paused: HMS Triton, 1771 - 1/48

"Have no fear of perfection - you'll never reach it." Salvador Dali

Link to comment
Share on other sites

Almost fully automated modelling, hjx! My only concern would be the amount of scrap wood generated. Could one move the pieces closer together to mill them out?

Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series  http://trafalgar.tv

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...