ccoyle Posted April 25, 2020 #31 Posted April 25, 2020 Outstanding job! Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
JEB Posted October 6, 2020 #32 Posted October 6, 2020 Really nice. I didn't know anything about card models, so it was interesting to see your log. Ryland Craze 1 Quote
ccoyle Posted October 6, 2020 #33 Posted October 6, 2020 18 minutes ago, JEB said: I didn't know anything about card models, so it was interesting to see your log. Oh, ho! Another potential convert to the Dark Side! Ryland Craze and Ekis 1 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
Michelnou Posted April 15, 2021 #34 Posted April 15, 2021 Kondzik, I admire your work, particularly the modelspan sails of your Allege d'Arles. Can you tell me if you have used metal wire (brass ?) on the exterior outline of the sail hided in the hem ? Which diameter have you choosen for these metallic rods ? I thank you for the advices. Mike kondzik 1 Quote
kondzik Posted April 15, 2021 Author #35 Posted April 15, 2021 4 hours ago, Michelnou said: Can you tell me if you have used metal wire (brass ?) on the exterior outline of the sail hided in the hem ? Which diameter have you choosen for these metallic rods ? No, I did not reinforce bolt rope with wire and in hindsight I should have. Right now, after a year since completion sails and bolt ropes soaked a bit of moisture from air and deformed a bit. I've used cotton thread, around 0,5mm in diameter, straight from the spool and did not wax it with bees wax to let pva glue grab easier to it, but it made it more prone to moisture unfortunately. I'm definitely going to try to use some wire in my current Saettia build but I haven't figured out yet if should embed it into sail or make my own bolt rope with wire core. Check out how Bruma made his sails in this log https://modelshipworld.com/topic/25323-cutty-sark-by-bruma-revell-196/page/7/#comments , you might find it inspiring to experiment a bit. Sails on my Allege currently look like this: ccoyle, tkay11 and GrandpaPhil 3 Quote
tkay11 Posted April 15, 2021 #36 Posted April 15, 2021 Very nice! Tony Quote === First build: Caldercraft HM Cutter Sherbourne 1763 FINISHED 2nd build: Triton cross-section COMPLETED 3rd build: La Chaloupe Armée / 42ft Armed Longboat of 1834 by tkay11 – scale 1:36, plans by M. Delacroix COMPLETED 4th build: Allège d’Arles 1833 (Ancre) POB by tkay11 – scale 1:100, plans by F. Fissore COMPLETED Working on La Jacinthe 1:96 POB (ANCRE publications)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.