NRG SAW JIG Now Available

[kurtvd19]

THE NRG THIN STRIP SAW JIG

The Thin Strip Saw Jig shown in our December 2021 Virtual Workshop on Table Saw Use & Safety by Kurt Van Dahm is now available for purchase.  This jig is usable on the Byrnes and Preac saws as well as any small table saw with a 1/2-inch-wide miter slot that is at least 1/8-inch-deep.

 

EASY TO USE WHILE INCREASING SAFETY AND SAVING TIME

The jig is designed to make cutting identical strips from a sheet of wood.  Measure once and cut as many as needed without resetting the jig.  Cutting the strips to the outside of the blade eliminates the risk of the strip being trapped between the blade and the fence and shot back at the saw operator.  The jig saves time when making repeated cuts such as for deck planking and cutting your own strip wood from sheets.  Once set the accuracy of the Thin Strip Jig cannot be equaled. 

 

JIG IN USE

LEFTIES - PLEASE READ THIS

 

If you are left-handed, please contact the NRG Office before you order your Thin Strip Saw Jig and let us know you are left-handed, we will install the logo on your jig, so it is right side up when in use.

 

LIST PRICE IS ONLY $15.00 (US)

DON'T FORGET NRG MEMBERS GET 20% OFF ON THIS AND MOST ITEMS SOLD

IN OUR IN-LINE STORE – BUT YOU MUST USE THE DISCOUNT CODE.

We are unable to refund the difference between the list price and the Member's price.

 

 

ORDER HERE

 

 

                                                                                                              Type this in if link does not work

https://thenrgstore.org/collections/guild-products/products/thin-strip-saw-jig

 

 

 

 

[Nirvana]

An amazing tool to use. Works like a charm!
And you can make very thin strips.

[Landlubber Mike]

Good video of seeing how this works on a full size table saw - just got this from Woodpeckers today:

 

https://www.woodpeck.com/thin-rip-guide.html?trk_msg=O3O5OF4Q7IL4RE8IQJJIJ0TLAK&trk_contact=57DNDG6UB4FIQFKDH245OGPH04&trk_module=spe&trk_sid=9JSG8CFOA5GEDOSOS6SAJAULRK&trk_link=S0ITBEDVL0D436URM7VQ96CCLS&utm_source=listrak&utm_medium=email&utm_term=Woodpeckers+ThinRip+Guide&utm_campaign=Woodpeckers+ThinRip+Guide&utm_content=Woodpeckers+ThinRip+Guide

[kurtvd19]

Yes, that's a great video.  Shows exactly how it works. I will keep the link so when I get asked how it works I can give the link to our members.  Thanks for providing the link.

 

Leave it to Woodpecker though to over engineer yet another tool to make it un-affordable to 90% of the population.  I drool over how well made their stuff is and if money were no object would probably have a couple of their tools.  The local Woodcraft store will order them for you but they don't stock any of their products because 90% of their customers look at them the same way I do - admire from a distance.