Rattlesnake by CapnJack43 - Model Shipways - 1/64 - American Privateer

[CapnJack43]

Working on the gratings

[CapnJack43]

[CapnJack43]

Making a stairway for the forecastle put together a jig with the dremel drill press

[CapnJack43]

Used 1/8x1/32 wood for the staircas

[CapnJack43]

Stairs are installed time to work on chainplates

[Knocklouder]

Very impressive,  amazing work and details, nice work. 

[CapnJack43]

Didn't like the bread and butter longboat that came with the kit so I decided to order a longboat from model expo.

Kit came in a plastic bag with no photo and a single sheet of printed instructions and the photos on the sheet 

were so dark that I could not figure out what they were trying to show.  Found some links on this site from other 

builders that helped clear things up.

 

[CapnJack43]

Chainplates with deadeyes are done - made another jig with an alligator clip to hold them level while gluing them to the hull.

Chain did not come with the kit - bought some chain in Walmart and secured to the hull with pins.

[CapnJack43]

Bow rail did not line up after gluing it together.  Used a piece of strip wood and alligator clips to get the proper spread.

[CapnJack43]

Fore and aft deck rails are done getting ready to work on the bow rails and dreading it.

[CapnJack43]

Bow rails are completed thanks to Kenneth Powell for the great photos in his build log. Made the grating out of 1/32x1/32nd strip wood.

Using my home made jig for attaching the rails to the bow makes up for my shaky hands.

[CapnJack43]

Made a needle out of a piece of brass rod by hammering the end to flatten in and then drill a small hold to insert the anchor line.

[CapnJack43]

Had some leftover rail posts from my Danmark Build - used them with some leftover brass rod to make the side rails.

[Kenneth Powell]

That's cool 🤩

 - Kenneth

[CapnJack43]

Been a while since I posted made some progress but lots of other things happening as usual.  Used drill press and dremel to shape the yards.

[CapnJack43]

[CapnJack43]

Trestle tree tops

[CapnJack43]

[CapnJack43]

Soldered up wire jigs to get proper spacing between deadeyes

[CapnJack43]

[CapnJack43]

Found this great pic of deadeye rigging and added step numbers in red.

[CapnJack43]

[CapnJack43]

White card stock placed behind the shrouds makes tying the clove hitches for the ratlines easier to see.

Hope to get going on the remaining ratlines soon.

[CapnJack43]

Making slow progress working on the rigging when time permits, Ratlines are finally done & don't want to see another clove hitch for a while.

Had some railing posts and brass left over from the Danmark and used them on the mast platforms.  Netting was from a flower arrangement donated

by the first mate.