rkre88 Posted April 20 #1 Posted April 20 Hi all, I'm new here. First build log. Got back into modeling of late and finally joined the forum. I tinkered around a bit with some other kits to build some skills and I feel like this one is where the practice and patience is starting to pay off. I actually kind of feel guilty about how well this kit has gone, almost too easy. Anyone else have experience with this kit? Zero flash. All parts have fit perfectly so far. I know this is not how it usually is. I have been bumbling my way back into the hobby and have made lots of mistakes and am probably still doing things incorrectly, so constructive criticism is welcome from all of you, masters. Obviously I need to do a lot of touch up painting. One question I have is how to paint the masts? The instructions say to paint everything brown, but I think that looks kind of dumb and probably isn't accurate. Any suggestions or good sources to go to for ideas? Starting this build log part way into the project already, so apologies for no earlier pictures. But here is where it lies today. Scottish Guy, ccoyle, Rudolf and 1 other 4 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
Scottish Guy Posted April 21 #2 Posted April 21 Welcome at MSW and nice work so far. Looking forward to see the progress on this one. For the colours of the masts? There are different colour schemes I think since the masts even have been replaced over time. Here is a picture by Prayash Panthi from the current Cutty Sark in Greenwich at the museum. This is just rebuild after burnt down twice so if the colour scheme they used is acurate? I don´t know. But when you search in the LOGs you can find some really well done jobs of the Cutty Sark in different styles, plastic and wood and even scratch builds. Depends on your preference tbh. Maybe one of the best builds here from Bruma Micha Quote "The sea, once it casts its spell, holds one in its net of wonder forever." Jacques - Yves Cousteau. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Current Build: "Roar Ege" by Billing Boats - 1:25 On Hold: n/a Finished: n/a
rkre88 Posted April 21 Author #3 Posted April 21 8 hours ago, Scottish Guy said: Welcome at MSW and nice work so far. Looking forward to see the progress on this one. For the colours of the masts? There are different colour schemes I think since the masts even have been replaced over time. Here is a picture by Prayash Panthi from the current Cutty Sark in Greenwich at the museum. This is just rebuild after burnt down twice so if the colour scheme they used is acurate? I don´t know. But when you search in the LOGs you can find some really well done jobs of the Cutty Sark in different styles, plastic and wood and even scratch builds. Depends on your preference tbh. Maybe one of the best builds here from Bruma Micha Going with brown masts and black yards for now and see how it turns out. Will post pics when painted. Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted April 21 Author #4 Posted April 21 The raised details on the bow of this kit are really my only complaint so far. They are not raised enough to bring them out nicely with dry brushing gold. Or maybe my skill just isn't there yet. Excuse the bleeding white from the pinstripes. GrandpaPhil, Rudolf and ccoyle 3 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted April 24 Author #5 Posted April 24 Did a first coat with tan on the lowest yard and the mast below that. I think I am liking it more than the brown. GrandpaPhil, Scottish Guy and Rudolf 3 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted April 27 Author #6 Posted April 27 Well, disaster struck today. One of my earlier builds that I had not yet completed, an Airfix Victory is now shipwrecked. My workshop behind my garage has two doors which were both open and it got super windy. You can guess what happened. It actually looks kind of cool, like it just went through battle! Scottish Guy 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
Thunder Posted April 27 #7 Posted April 27 looks like you were making a great job and looks saveable to me. Scottish Guy 1 Quote Current Build(s): H.M.S Diana 1794 - Caldercraft 1:64 Scale Completed Builds: H.M.S. Cruiser 1797 - Caldercraft 1:64 Scale H.M. Naval Cutter Speedy 1828 - Model Shipwright 1:48 Royal Caroline 1749 - Panart 1:47 H.M. Brig Supply 1759 - Caldercraft 1:64 H.M.S. Pickle 1778 - Caldercraft 1:64 H.M.Y. Chatham 1741 - Caldercraft 1:64 H.M.S. Resolution Cutter - Corel 1:50 H.M.S. Racehorse - Sergal 1:47 (Renamed H.M.S. Thunder 1740) first wooden kit build.
rkre88 Posted April 28 Author #8 Posted April 28 One mast finished with paint. Two more to go. Scottish Guy 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted April 28 Author #9 Posted April 28 Anybody have any ideas on the easiest way to paint this base without making a mess? The name and details are inset and very fine. Use a toothpick to get in the grooves? Scottish Guy 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted May 6 Author #10 Posted May 6 Quick update. Got some rigging done on the main mast and attached most of the preformed ratlines. The supplied thread is garbage. Will be ordering some good stuff on my next build. The rigging isn't the tightest, but once I rig the main to the fore, it should tighten up. Scottish Guy 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted May 19 Author #11 Posted May 19 Rigging is coming along. Never using the supplied rigging again. This stuff is terrible. Scottish Guy 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
rkre88 Posted May 26 Author #12 Posted May 26 Finished with the rigging as far as I am going to take it for this project. I am not going to add sails. Just need to add the draft and stern decals and attach the anchors. Giving it to my brother tomorrow as a thank you gift. Where to next? I about have enough Amazon points and gift cards to buy my next project: 1:96 Revell Cutty! Bob Fraser 1 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
Bob Fraser Posted May 26 #13 Posted May 26 A nice tidy job. You'll find the 1/96 a whole different beast that opens up a world of options 🤯 - just do a search and you'll find all the different options and methods that people are using from out of the box to huge kit bashes. As has been suggested, look at the one by Bruma, and the Ferreira build by rwiederrich, but don't limit to just those. Quote Bob Current build Cutty Sark, Mini Mamoli Finished King of the Mississippi No trees were harmed by this message, but an awful lot of electrons were put out.
Snug Harbor Johnny Posted May 26 #14 Posted May 26 A nice job, and I'm familiar with the 1:150 kit - which turned out to be just a little smaller than my not-so-nimble fingers could accommodate. There is a 1:120 scale Cutty Sark (I reviewed the Monogram version) that one can occasionally find where there are TWO sets of yards ... one with extended studding sail booms, and one with them retracted. If the nearly 3' long Revell Cutty seems on the large size, the 1:120 Japanese version (if you can find one) could suit. The tool and die work is nice, and the deck level with respect to the gunwale is correct. (The 1:96 version has the deck positioned higher with respect to the gunwale, which makes the cabin roofs rise higher than the original ship.) Yet 1:96 DOES allow for more detailed rigging and other options. Rob Wiederrich demonstrates that just a little material can do for furled sails atop the yards (as they would be in harbor). With or without furled sails, the upper topsail yard would be lowered close to the lower - so the 'lifts' would be taught. The topgallant and royal yards would also be lowered. When raised, the 'lifts' droop, as there is no tension. Congratulations on your build ! Quote Completed builds: Khufu Solar Barge - 1:72 Woody Joe Current project(s): Gorch Fock restoration 1:100, Billing Wasa (bust) - 1:100 Billings, Great Harry (bust) 1:88 ex. Sergal 1:65
rkre88 Posted May 27 Author #15 Posted May 27 Bob and Snug Harbor Johnny, Thanks for the encouragement! I am now officially finished. Here are my thoughts on the kit. Pros: Absolutely zero flash (not a bit!), everything fit great for the most part, nice detail for the deck boards, the yards were all one piece which made things easier (this did make painting more of a challenge). Cons: Plastic ratlines make the kit look a bit cheap, the designs in the hull were not distinct enough to get a good result when dry brushing the gold so I had to leave them black, there are no aftermarket parts (photoetch etc.) available for the kit that I could find. Overall a great kit at a good price. $63 on Amazon. They are going for north of $100 on eBay for whatever reason. ccoyle, Scottish Guy and Bob Fraser 3 Quote "Use the right word, not its second cousin." - Mark Twain Current builds: Revell Cutty Sark 1:96 Completed builds: Academy Cutty Sark 1:150
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.