1204m Shmel Riverine gunboat by RGL - Tiger Model - 1/35 - PLASTIC

[clearway]

great job as always Greg

[RGL]

Ok back in the Shmel. The deck, three coats of red/Orange/dark grey then I’ll give it a good clear coat, chipping coat then lots of green coats and chip it back 

Edited November 25 by RGL

[RGL]

Now this is NOT my model but my concept of clear resin for this build 

[BANYAN]

Love the acrylic base Greg, I will be very interested in following your efforts with this.

 

cheers

 

Pat

[RGL]

So green base graduation of 4 shades of green

then chipping

then let the masking begin. 

Edited November 27 by RGL

[RGL]

As things going to be ‘floating’ in resin, I want to make the hull filthy and lots of alge, some Mr surfacer and cotton wool. At 1/35 it actually seems to work!!!! 

[RGL]

So that’ll do for the lower hull as it will be under water (clear resin) 

[RGL]

So the masking in the deck lifted even more paint (I like it), the base coat done on the upper hull, a dryfit for the sake of art. If you can’t view it I’m Bacon Bits Models on Facebook