Nirvana Posted December 14, 2013 #1 Posted December 14, 2013 A long time of no posting and several requests has made me to start the next Harvey project build log. This build has been going on for some time. Many changes and alterations has been done to the original parts, this due to material not measuring to the material list dimensions. This picture is the latest one some ten minutes old, before uploading. From this point I will go back to the start and explain what I have done as there are several changes, this in my best way. Have patience with me, as this kit will be kit bashed. not knowing the final physical outcome. This picture also shows partial of the pre-bending of walnut strips. As I am intending a single layer planking.If I fail I can go to double layer. By putting the paper clips on each bulkhead I can there-after put soaked strips through the holes and get the right bending. Some of the pictures from this build has appeared in other topics. Eddie 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted December 14, 2013 #2 Posted December 14, 2013 Well its about time! Nice looking laminated plans you have there! Now don't you dare get ahead of me or your visitation privileges will be revoked! Eddie 1 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Nirvana Posted December 14, 2013 Author #3 Posted December 14, 2013 Floyd, I won't even be near you when it comes to planking...... The "bubble effect" is not bubbles but a mix of glue and walnut dust Eddie and mtaylor 2 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 14, 2013 Author #4 Posted December 14, 2013 Okay to back to the beginning When I started this kit I didn't realize there were discriminates of dimensions material list versus real items. This resulted with added material to bulkheads but also to the deck aligned. This picture shows how bad it was. With the aftermath and added work I should have made new bulkheads from the beginning. Bulkheads and the added material. Sorry to have the metric measure upside down. Part list shows the bulkheads at 6mm. Real part is much more narrow. mtaylor and Eddie 2 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 14, 2013 Author #5 Posted December 14, 2013 With added material I did have some area to add glue to for the planking. Eddie 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 14, 2013 Author #6 Posted December 14, 2013 Planking as it is right now. mtaylor and Eddie 2 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 14, 2013 Author #7 Posted December 14, 2013 How Harvey/Harley was naked The mast holes was cut out using templates from the plan. I did change the rake a little to the aft, which would have been more appropriate to the time between 1790-1830 for "this type classes of ships". There is very little of back ground history of this ships from this time. One book to rely to when it comes to Rigging is the book of Lennarth Peterson - Rigging Period Ship Models Eddie and mtaylor 2 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 14, 2013 Author #8 Posted December 14, 2013 With the mast holes cut accordingly to plans (with little more rake) I added material to each side of the false keel, matching the shaved mast. Now since that is done I added the masts with the "stays" getting the rake, just for visual purpose. I added side blocks at the mast steps. mtaylor, Eddie and fnkershner 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 17, 2013 Author #9 Posted December 17, 2013 Well its about time! Nice looking laminated plans you have there! Now don't you dare get ahead of me or your visitation privileges will be revoked! How would you explain that to Bear? The plans are not laminated per say, but stuck in between two pieces of 4mm plexiglass. Eddie 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted December 17, 2013 Author #10 Posted December 17, 2013 I have done all the planking without any clamping. In the book "ship modeling simplified" Frank Mastini uses a gluing method of both wood glue and CA. The CA works like clamps and the wood glue for strength. fnkershner, Eddie, mtaylor and 2 others 5 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted December 17, 2013 #11 Posted December 17, 2013 I call that method CA spot welding and use it quite a bit. Eddie 1 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
mtaylor Posted December 19, 2013 #12 Posted December 19, 2013 When I first saw the title, I was wondering "Is he going to turn a ship into a motorcycle?". Anyway, I'm going to follow along with interest and popcorn. Eddie and Nirvana 2 Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Nirvana Posted December 19, 2013 Author #13 Posted December 19, 2013 Mark, No motorcycle but named after one of my dogs. Hope you have your own popcorn as I ran out of them. Eddie 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted January 2, 2014 Author #14 Posted January 2, 2014 Late night update, The 1.5 mm single layer walnut is progressing. I am planking in "four bulkhead sections" The grain is beautiful so I am still not sure whether to varnish or paint the hull.. Maybe half and half, underneath waterline painted and above varnished. fnkershner, Eddie and mtaylor 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted February 23, 2014 Author #15 Posted February 23, 2014 As I am waiting for the last game of the Olympic Ice hockey I have been working of on my Harvey for a while..... and long before, ( updates has been asked for) Planking is complete and all is with 1.5mm walnut first layer..... and only layer. However, I do like the finish even without any finish. There is several more steps before any painting will happen. I tried to use minimal wood filler and where it is filled, a combo of wood-filler and dust from wood has been combined for the matching. Additional sanding is needed but I am ready to for the next step of planking.... yeah! finally! Eddie, mtaylor, Blackie and 2 others 5 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted February 23, 2014 #16 Posted February 23, 2014 Yes I asked for updates. You keep hinting but never updating. One would think that a doctor would set a better example. Eddie 1 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Nirvana Posted March 8, 2014 Author #17 Posted March 8, 2014 During a "house call at the West side of the state I also had time to work on my "Harley" I have come to the stage of "decking" as in the picture the king plank is attached. To simulate the caulking I used a borrowed graphite pen. It's a tedious job doing the simulated caulking but progress is certainly on the way. And yes, I am the one doing the job .... mtaylor, coxswain, fnkershner and 4 others 7 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted March 8, 2014 #18 Posted March 8, 2014 Such fine work! Eddie 1 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Nirvana Posted March 9, 2014 Author #19 Posted March 9, 2014 (edited) Oh, forgot the thing about length of deck planks. Since the kit is 1:50, and guessing a normal "real" plank may run in the length of 6 meters (about 6 yards) I cut the planks to 12cm. The kit plans shows a plank length of 7cm which should be 3.5m (about 3.5 yards) Seemed to make some sense to me. Edited March 9, 2014 by Nirvana Eddie 1 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted March 9, 2014 Author #20 Posted March 9, 2014 Decking is completed now some trim around the edges, once that is done light sanding with 340 paper. mtaylor, reilly, Eddie and 3 others 6 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted March 9, 2014 #21 Posted March 9, 2014 Very nice job! But you didn't finish the planking on my Harvey. That was why you made the house call wasn't it? Nirvana and Eddie 2 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Nirvana Posted March 17, 2014 Author #22 Posted March 17, 2014 Waterways being installed, again the material can't be bent in lateral way so I made them in sections. Probably wrong to the time era, but has to work with material provided unless swapped fnkershner, coxswain and Eddie 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted March 24, 2014 Author #23 Posted March 24, 2014 The waterways are of walnut .... so ******** (don't even know that word) to bend lateral way. Eddie, fnkershner and coxswain 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted March 28, 2014 Author #24 Posted March 28, 2014 Hah, found my way around the waterways, and no doesn't involve removing them. The part to the stem is a three-piece glued walnut to be shape accordingly. Eddie, fnkershner and coxswain 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted March 28, 2014 Author #25 Posted March 28, 2014 I would say I am pretty pleased with the trimmed piece. no need for lateral bending anymore. Eddie, mtaylor and coxswain 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted April 8, 2014 Author #26 Posted April 8, 2014 The waterways are in place. The material for the bulwarks in the kit is 1.5mm plywood. I didn't like how the shape turned with that. Besides it is really hard to bend and get a nice shape. But I did have 1mm card stock, using the bulwarks as templates I cut out two exact copies. Shaping will be so much easier. Besides the in and outside will be covered with thin walnut veneer. Sorry for the messy table. coxswain, mtaylor and Eddie 3 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
fnkershner Posted April 8, 2014 #27 Posted April 8, 2014 Man O man you are going to catch me! mtaylor and Eddie 2 Current Builds - 18th Century Longboat, MS Syren Completed Builds - MS Bluenose, Panart BatteStation Cross section, Endevour J Boat Half Hull, Windego Half Hull, R/C T37 Breezing Along, R/C Victoria 32, SolCat 18 On the shelf - Panart San Felipe, Euromodel Ajax, C.Mamoli America, Its a sailor's Life for me!
Nirvana Posted April 13, 2014 Author #28 Posted April 13, 2014 Port Bulwark in place. The card stock came out very nice. Regular wood glue put it in place. Now the starboard side. mtaylor, fnkershner, Eddie and 1 other 4 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted April 13, 2014 Author #29 Posted April 13, 2014 The starboard bulwark installed. Planking the inside and outside is next. Eddie, fnkershner, mtaylor and 1 other 4 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Nirvana Posted April 14, 2014 Author #30 Posted April 14, 2014 Bulwark planking and using the "eye-liner" method for caulking. fnkershner, coxswain, mtaylor and 1 other 4 Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Recommended Posts