Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

mtdoramike

Members
 View Profile  See their activity

  • Posts

    2,085

  • Joined

  • Last visited

 Content Type 

Everything posted by mtdoramike

  1. mtdoramike
    Installed the rudder and chains.
  2. mtdoramike
    Will do, thanks Red.
  3. mtdoramike
    I decided to go with brown railings. mike
  4. mtdoramike
    Unless you spend 8 hours a day 7 days a week on this model, expect a year and a half to more like 2 years. But as long as you are prepared for the model once finished because it's not just the model, but the size of the display case as well, which is even bigger. mike
  5. mtdoramike
    What a step by step process on the glassing. But what a beautiful finish. I can't wait to see the final result. mike
  6. mtdoramike
    InnKeeper, build the model you want to build. To me, even as a beginner it wasn't the difficulty of the model as much as it was price point, size and length of time it would take to complete it. You can start off with a practice model if you are the type of person who may or may not finish a fairly complex model. But if you feel that you can devote 500-600 hours on the Endeavor kit and be willing to ask questions can follow instruction well and can read plans fairly well then I would say go for it. You will have plenty of help here to ask questions. How some people can finish the Endeavor in 4-6 months while it might take others a couple of years to build. It all depends on how much time you are willing to devote to the model each week. When I'm building a model, I try to spend at least 1-2 hours almost every day on it either building, studying plans or researching that type of model. I actually spend quite a bit more time than this most of the time and can lock myself up in my work room for 5-6 hours easily if I don't have nothing else going on. But it's football season here and that takes away some of my modeling time. mike
  7. mtdoramike
    I can't really say this is my first attempt at R/C, because I have built several R/C planes from the ground up and outfitted them with all the required equipment and either flew them or sold them. But I eventually got out of R/C planes a few years back. So I have some working knowledge of R/C that I will have to translate into radio control boats.
  8. mtdoramike
    Thanks for the info Grant, I was thinking of gold leafing some of the parts to try and mimic shiny brass plating. Here is a link to the kits that Grant is referring to: http://www.caswellplating.com/electroplating-anodizing/brush-plating-products/plug-n-plate-kits/plug-n-plate-copy-chrome-kit.html this will a good affordable option. mike
  9. mtdoramike
    Here is the Dumas 1954 Chris Craft Commander Express 36" model kit that I received. My first impressions were the size of the box was quite larger than I expected and weighs close to 15 pounds. It has the typical woods. I didn't get too much into it since this will be stored away until I finish my current Montane's build. But one thing I did take note of was the fittings weren't crome or shiny, but looked like either lead or pot metal fittings and will need some type of finishing on them. But here are a few pics as to what it looks like at this point. This will be my first attempt at R/C building. I had thought about building this for my grand baby and son in law, but I think it might be a bit to large for them, so I might decide to sell it once completed to re-coop what I have invested in it. I'm mainly building it just to get a change from cannons and rigging and to try my hand at something else. mike
  10. mtdoramike
    Beautiful work, the stickers look great. When I do mine, I will have to get with you and see if you can have your sticker shop make up some for me, I don't have a sticker shop any where near me. mike
  11. mtdoramike
    You are putting to much thought into it. The object of this is to have fun, enjoy what you are doing and learn while doing it. Most of the models that I built were probably not quite accurate, but still built into a beautiful model. No one is going to question well is it a 1:64 scale or closer to a 1:66 scale. You must realize that you are building from a kit, so you are at the mercy of the kit manufacture when it comes to size and scale, not all parts will be exactly to that particular scale, but close enough for government work. If you are looking for perfection, which it sounds like you are, then don't worry about a kit, get a set of the most accurate plans you can find and build it from scratch.
  12. mtdoramike
    I have built a few Billings boats kits one of which were the Danmark and another was the Bluenose that I can remember off of the top of my head and I have nothing but good things to say about Billings. Great company, great kits and good instructions and plans. Now, with that said, the big complaint I have heard about Billings boats are their use of plastic fittings, which I'm not opposed to for most fittings, but I have replaced some fittings with wood on their kits. You can do this with most any kit if you don't like certain fittings. You might want to look at Cornwall models in England and check out Cauldercraft models, they are a good company from what I hear. I would also look at Artesania Latina and Constructo kits they are good quality kits with great wood and good fittings. My first ever wood ship model was the Constructo Bounty. I then went on to builder their Mayflower, Cutty Sark, Pandora and the San Mateo. Just remember that a kit is a kit is a kit, it's what you do with it that counts. I have never run across a bad kit and I have built better than 30 of them from numerous kit manufactures. But I also know going in that the kit is only the beginning or starting point, it was up to me to make the best representation of the subject model that I could with what I had and if that meant replacing portions of the kit or spend hours researching that particular model to make certain changes that I thought was needed to make it more accurate to me, that is what I would do. Just look at the kit as being your first step into a wonderful adventure that you are about to begin and I think you will do great things with your model. This is the way I look at each and every build I do. Good luck on what ever you choose and help is just a key board away, mike
  13. mtdoramike
    started on the railings today. Debating on leaving them the white or light color wood or paint them brown? I haven't totally decided yet.
  14. mtdoramike
    I got a little more work done on the Monte, like the chain plates, lanterns and rubbing strakes. There was a piece of thin plywood that I didn't care for the color of the wood, so I decided to paint the pieces brown. I would have rather left them natural, but it wasn't meant to be. I was a bit disappointed in OcCre's choice of wood for the Plywood though. mike
  15. mtdoramike
    Ooooooo, thanks Stan, those are some real beauties and brings back some fond memories of some of the best boats ever made. mike
  16. mtdoramike
    Thanks for the club info Stan, look like some valuable information. mike
  17. mtdoramike
    I didn't say it was VA, I said It looked like it. But thanks for the observation. mike
  18. mtdoramike
    I just bought a 1954 Dumas Chris Craft Commander Express 36" kit that I will be starting on one I finish the Montanes. It will be my first RC boat. What a classy looking boat. Man they sure knew how to make them back then. The Commander reminds me of the SS Minnow that sank on the Gilligan's Island show. http://www.dumasproducts.com/product_info.php?products_id=186 mike
  19. mtdoramike
    OK, on with the fiberglassing.
  20. mtdoramike
    That is really neat, I would have thought to use it myself. mike
  21. mtdoramike
    Well that IS a new use for old Stockings. Then when your boat gets on plane you can say your boat is getting a little "leggie". MIke
  22. mtdoramike
    To me, Varnish would not be enough, initially it might not leak, but if you hit something or just the strain and stress from the motor(s) could cause issues. I too have never glassed anything either and is why I'm curious to see how yours turns out. I intend to build an R/C boat as a gift for my son in law and my grandson, so I will be glassing what ever I choose to model. mike
  23. mtdoramike
    I can't wait to see the fiber glassing phase mike
  24. mtdoramike
    Looks gorgeous, but you are not going to fiberglass the bottom of the exterior of the hull? Are you sure the varnish will be water proof enough for the bottom of the hull? But I do love that mahogany wood look, WOW. mike
  25. mtdoramike
    What a real beauty, you got to love that mahogany look. mike

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...