NMBROOK

I have completed the basic 'inner' hull structure to the starboard side.As I am waiting for a timber delivery I thought I may as weel sort out the lower gunport linings.After studying Euromodels drawings and also pics of the builders model,it became apparent there were differences not just in the position of gunports but also the height  and shape of the top of the hull sides.Because I want to reflect the design of the NMM model I would have to address these areas.The most notable fact is there is a gunport right forward on the museum model that is missing on Euromodels representation.Looking at the design you would probably only get a musket in there,but it is there nevertheless.Also the stern galleries are very different and you will notice the gunports are close up to this.This basically meant starting from scratch and the bulk of the ports were moved aft slightly.An additional port would then fit in at the beakhead,but also the first and last port on the main gun deck are spaced differently.My revised design reflects this. 
There is a three page article in John Franklin's book covering the builder's model which gives the exact gunport sizes and wale scantlings and spacings.The Euromodel kit design shows upper wales that are too small in comparison.In order to get things to work the top edge of the hull has been increased in height to compensate for this.You will notice the additional pear laminations on the top edge,the bulkheads are too short to run to the top.The lower of the pear strips has been 'dowelled' with 0.7mm copper wire into every pear upright.This has resulted in an incredibly strong hull wall even before planking.
 
Kind Regards
 
Nigel

Hi Tony
That one is easy,and they have a branch near you I should imagine,WHSmith   It was their site that listed the black paper and gave the weight.There were some other sites I looked at,mainly bulk stationary suppliers that gave larger weights.I just bought another 5 packs of tissue yesterday just in case there is a sudden national shortage If you visit their store the tissue paper is next to the wrapping papers
 
Kind Regards
 
Nigel

Excellent work mate !!That is a great technique,I am sure practice off the model is necessary,just have visions of hinge stuck to fingers and hand stuck to model I take it you use medium or thin CA?
 
Kind Regards
 
Nigel

Thank you very much indeed Patrick,Admiral and Matti I wanted something that the inside dimension would be fixed by the milling work ensuring consistency and also wouldn't rely on a jig for accuracy.With these I just applied glued and squeezed the assembly together in the bench vise.Hardest part is making sure I got all the excess glue off the inside .
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

Wow, thanks guys, really happy you like it!
 
Keith, I'm still amazed what you managed to do in small scale detailing. Thanks for your kind words. Pictures outside not only gives nice backgrounds and light, tt's also a great way to see how the paintjob works.
 
Cheers Nigel, I use regular paper soaked in CA glue. It works great for thin details like these and it's shapeable before turning really hard. The surface is great for looking like iron after painting it. I try to keep the details small and thin and I find tis method to work well for that. It takes some practice to get the right amount of glue, and mounting the detail quick enough though. When used to it you get great controle, The shafts are simple brass rods in a nice scale in the right lenght.
 
 
/Matti

Your hinges are great buddy !What are you making them from?I enlarged the pic and it looks like the real rudder sat on a 30ft high book!!!
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

That looks great mate!The cross section looks like it would come in handy if you were fitting out the interior.I hope your rudder doesn't get eaten by the dog like mine did for Caroline   I don't think you have a dog so that reduces the odds considerably  
 
Kind Regards
 
Nigel

Thank you very much indeed Patrick,Admiral and Matti I wanted something that the inside dimension would be fixed by the milling work ensuring consistency and also wouldn't rely on a jig for accuracy.With these I just applied glued and squeezed the assembly together in the bench vise.Hardest part is making sure I got all the excess glue off the inside .
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

Hey all, started to work on the rudder. I want to make my own hinge construction to make it more in scale and more wonky like the original.
 
The original shape is good but had no cut outs for the hinges so I wanted to have them aswell.


 
 
/Matti
 
 

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

You got such a clean result and it gives scale to her. Perfect! 
 
 
/Matti

amazing method nigel, looks like a great idea.

Very nice little gun port boxes Nigel. This is a method I may steal for use in my endeavors. Great idea!

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel

As I am waiting both for glue to dry and a timber delivery to arrive,I thought now may be a good time to make some linings up for the ports of the main gun deck.I had come up with a simple design that through its shape would ensure consistency of size.This profile was machined on the MF70 out of 3mm Pearwood.The thickness will be hidden under the planking so I could afford to make something substantial.The idea being to machine the profiles,glue together and slice the box up into lengths sufficient to allow for the tumblehome.These will be glued in place and the inside and outside face shaped flush with the hull structure.the sequence of pics explain it better than anything.
 
Kind Regards
 
Nigel