BubbleHead
-
Posts
103 -
Joined
-
Last visited
Reputation Activity
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally get to move on to chapter two. Made another Ballare didn't like the first one didn't like.
-
BubbleHead got a reaction from Rustyj in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally get to move on to chapter two. Made another Ballare didn't like the first one didn't like.
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from Edwardkenway in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally get to move on to chapter two. Made another Ballare didn't like the first one didn't like.
-
BubbleHead got a reaction from rafine in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from Rustyj in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from Edwardkenway in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from JpR62 in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from Chuck in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from CaptMorgan in HMS Winchelsea 1764 by Bubblehead - 1:48
I finally got all my mistakes, redos, crashes fixed and ready to move onto chapete two. Hopefulley I'll do better.
Hear is my rendition of the ballard's. What do you think should the top be thinner they are just under 1/16" or just take them off and put new one's on as the square is a little small.
Tom
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
Frank to my suprize it made the curve. The frames fit a little tight in there slots. As I put each one in had to bend each slot a little open to get the frames in and it created the curve. Then pursh all frame bottoms on the bench to make them even and all lines on the mark. I tried everything for three days short of rubbuer glue to keet thoese little devels in.
Tom
-
-
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
I'll try to explain what I did. First I glued the framing guide to birch plywood and used a 6.6 end mill (this end mill makes a good fit for birch plywood) to make the slots all most all the way through where the frames go. When the frames are installed in the jig it naturaly made the curve and held them in. Then trimmed the bottom of the jig to the tic markes where the bottom sills go, lined up all tic marks on the frames and jig and installed the lower sills. Then I cut the upper sills out of the jig the top was a bit long to make it stifer now I have a two pice jig. Install the bottom jig fits to the installed bottom sills, top jig to tic marks. Install window guides then fit and glue upper sils. When dry frameing jigs of walaw stern frame compleat. All most for got verry inportain step when I first put the frames in the jig I then set it on the bench and made sure all frame bottoms were even and the readjuste tick marks whitch I didn't have to. When it was finnished it fill right inthe stern, all most at the correct angle.
Broken frams were unglued and new frams were made.
-
-
-
-
-
BubbleHead got a reaction from Vladimir_Wairoa in HMS Winchelsea 1764 by Bubblehead - 1:48
It's been along time since I've been hear, gun ports and farring. Started inside faring and what a mess. The day befor I read Chuck blog about slowing down I told my self you got to excited in a hurry you have to slow down. The reslut in my excitment was a mess. I will be on gun port and inborad farring and most likely repair for a while. Thank You Chuck for the reminder.
Tom
-
-
BubbleHead got a reaction from Edwardkenway in HMS Winchelsea 1764 by Bubblehead - 1:48
I'll try to explain what I did. First I glued the framing guide to birch plywood and used a 6.6 end mill (this end mill makes a good fit for birch plywood) to make the slots all most all the way through where the frames go. When the frames are installed in the jig it naturaly made the curve and held them in. Then trimmed the bottom of the jig to the tic markes where the bottom sills go, lined up all tic marks on the frames and jig and installed the lower sills. Then I cut the upper sills out of the jig the top was a bit long to make it stifer now I have a two pice jig. Install the bottom jig fits to the installed bottom sills, top jig to tic marks. Install window guides then fit and glue upper sils. When dry frameing jigs of walaw stern frame compleat. All most for got verry inportain step when I first put the frames in the jig I then set it on the bench and made sure all frame bottoms were even and the readjuste tick marks whitch I didn't have to. When it was finnished it fill right inthe stern, all most at the correct angle.
Broken frams were unglued and new frams were made.
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
Hello: I'm really running late now. Got the repairs done and thought now I can finally build something. Stern framing up next this looks fun, in my case no such luck. After a few weeks of trying to put the lights (window) spacers in, rubber bands, gluing ungluing parts to see if I could keep them in with rubber bands still just breathe on them, they fell out. Sorry Mr. Passaro I just couldn't make them work for me, so this is what worked for me, and everything fell into place. Everything is just dry fitted now.
Tom
-
BubbleHead got a reaction from FrankWouts in HMS Winchelsea 1764 by Bubblehead - 1:48
Houston I think I have a problem. I thought I would be done with inborad farring guess not. I have to do a little extra, I don't see where on the plans or in the instructions to do this step. I was starting to clean up was getting the vac hose out and heard a crash turned and no ship on the bench uh-oh didn't put in the work stand. New aft frames needed and I think I can fix the keel back to be straght again will see. I will be a little longer in chapter one.
Tom
-
BubbleHead got a reaction from Kurt Bainum in HMS Winchelsea 1764 by Bubblehead - 1:48
Hello: I'm really running late now. Got the repairs done and thought now I can finally build something. Stern framing up next this looks fun, in my case no such luck. After a few weeks of trying to put the lights (window) spacers in, rubber bands, gluing ungluing parts to see if I could keep them in with rubber bands still just breathe on them, they fell out. Sorry Mr. Passaro I just couldn't make them work for me, so this is what worked for me, and everything fell into place. Everything is just dry fitted now.
Tom
-
BubbleHead got a reaction from westwood in HMS Winchelsea 1764 by Bubblehead - 1:48
Hello: I'm really running late now. Got the repairs done and thought now I can finally build something. Stern framing up next this looks fun, in my case no such luck. After a few weeks of trying to put the lights (window) spacers in, rubber bands, gluing ungluing parts to see if I could keep them in with rubber bands still just breathe on them, they fell out. Sorry Mr. Passaro I just couldn't make them work for me, so this is what worked for me, and everything fell into place. Everything is just dry fitted now.
Tom
Our Emblem ®
