Jump to content
HOLIDAY DONATION DRIVE - SUPPORT MSW - DO YOUR PART TO KEEP THIS GREAT FORUM GOING! (Only 24 donations so far out of 49,000 members - C'mon guys!) ×
2025 NRG PHOTOGRAPHIC SHIP MODEL CONTEST WINNERS ANNOUNCED ×
Ship Modeler's Handbook - Back in Stock ×

Ian_Grant

Members
 View Profile  See their activity

  • Posts

    2,118

  • Joined

  • Last visited

 Content Type 

Everything posted by Ian_Grant

  1. Ian_Grant
    I'm sure it was always her dream to see this ship, Malcolm. HaHa. Welcome to MSW; I am your newest follower. Seeing the photo with the foremast head in place reminds me to recommend: By all means glue the mast heads on, but leave off the cleats on the side faces on fore and main (for the jeer block lashings) and any rigging blocks for now. Reason being is that it is far easier to loop (the served) shroud pairs around a suitably sized drill or dowel for seizing then slip them over the masthead and down, rather than trying to seize each in turn around the masthead. Once the shrouds are in place the mast cap and topmast (and the jeer block cleats) can be added.
  2. Ian_Grant
    Excellent! If I ever build her it will be for RC. Wondering if I could have two servos act as the engines, pulling the paddle wheel at 90 degree offsets .... 😜
  3. Ian_Grant
    Bill, At anchor with the sails set? Your story could be that the anchor is fouled on the bottom and they are trying to sail it out of the ground (like in the Hornblower story "The Happy Return").
  4. Ian_Grant
    Thank you all! Much appreciated. I very much enjoy the comments, suggestions, and bantering asides during this build. It will be nice to add the finishing touches to the model and finally reclaim my workshop from this long drawn out project. I have some new kitchen drawers to make. Cheers, Ian
  5. Ian_Grant
    Here is a short video of the galley in the RC boat club indoor pool session. You can see my hastily-thrown-together transport dolly at the corner of the pool. Embarrassingly, I forgot to put the main deck on at launch hence the return to "shore". No rudders installed as yet hence the pivoting to turn. After a pivot she seems to keep veering in that direction for a while when rowing "straight". Nothing the rudders won't cure. Also note the 6V square lantern battery sticking up a little out of the stern deck. It's too tall to fit under the rear hatch. Still haven't bought the fancy 5-cell NiMH which will fit into the hull. Was planning to put it aft which is quite empty, but the only thing it connects to is my arduino daughter board in the bow. Here I used lamp cord running through the bilge for the connection. I'm not sure what current the giant sweep servos draw when rowing but I plan to insert n ammeter to find out, and to measure the 6V at the battery and at the bow to see if there's a substantial voltage drop. Lamp cord is a pretty big wire. If the drop is substantial the NiMH battery would be best in the bow, if I can fit it in this already crowded location (two sweep servos, Arduino, RC Rcvr, 12V battery). Or use something even bigger than lamp cord. It does look a little odd with the clear sweep of the empty deck. Will be doing something about that shortly.
  6. Ian_Grant
    What an unbelievably clean build; no sign of dinged edges or glue marks or sanding marks or the slightest paint flaw! Truly amazing work!
  7. Ian_Grant
    No, you're not wrong. 😏 Fortunately she's pretty chill when it comes to home improvements. 👍
  8. Ian_Grant
    Yeah.....storage. I was looking at our laundry room sink recently because it's very slow to drain. I squatted down to remove the trap to clean it out only to find that some clown glued together the entire trap assembly. I'll need to cut the ABS and install a new one...which got me thinking I should replace the sink too since it's disgustingly discoloured...which got me thinking I should re-think the whole sink-countertop layout - which got me thinking I should add some wall cabinets for storage to free up the counter and some shelves - which got me thinking I could move my two 43" RC boats onto a now cleared shelf...which got me thinking I could store the galley where those two boats now sit beside each other (i.e. on a very wide shelf) with oars on and all. To take it to the RC club meeting at the indoor pool today, I attached a piece of plywood and some braces to my two wheeled hand dolly. With the ram removed, the two aluminum dowels at the bow plug into two holes in a wood block attached to the ply, and the keel rests between the two braces. Add a strap at the stern, at the top of the dolly, and it wheels easily around. 🙃🤙👍 Though at 24" wide across the oar tips one must be careful in doorways.
  9. Ian_Grant
    It's true. Back when I guesstimated the weight of hull/mechanisms/battery/electronics I was way over, so the bilge volume is needlessly high. Trials in our pool in September yielded a weight of 22-23 lbs to set it to waterline, which is about 50% lead-shot ballast. It's a real issue trying to get it up the basement stairs and through doorways with oars sticking out both sides, and its 53" LOA. I will need a dolly or a wagon to take it to water.
  10. Ian_Grant
    I'll have to read up on how to video with this camera. No manual was included; do they expect us to carry around 8.5"x11" printouts wherever we go? A pet peeve of mine.
  11. Ian_Grant
    Great trip but back to reality. Bonaire is for scuba/snorkeling on its 1st class reef; there isn't a lot else to do there. There may be a night club in Kralendijk but we're too old and tired for that stuff. Lots of tasty seafood dinners. I'm very pleased with my underwater camera (Olympus TG-6) except that it doesn't have much zoom power. For example here are a few shots I took: Anyway, back to our regular programming. Wednesday afternoon I will be rowing the galley in a local pool which will be its debut to the RC boat club members. I've been slowly painting it but must stop now to let the paint cure. I haven't painted anything that will be in the water; after Wednesday I have another month to finish painting and to clearcoat it for protection before the last winter indoor pool session. I will spend tomorrow improving the oar mechanisms (according to findings of the September trial in our pool) then reinstalling to make all ready. Below the red and above the main wale will be "natural", the same colour as the inner bulwark panels to represent unpainted wood. Below w/l will be not-quite-black including the quadrilaterals at the bow. The black will extend up the stem and stern posts and also be on the cap rails. The decorative bits between the colours will be yellow. Some stem decorations will be gold. I still need to add the shield motifs in the outer bulwark panels. Still need to make rudders, scorpion artillery, fantail decorations, deck ventilation hatches, two fake access ladders to belowdecks, mast and yard, artemon and yard, aft flagstaff with eagle atop, and of course a crew. Oh and I still need to shorten the upper oars by 1/2" as discussed previously. Will try to make a video at the pool. Planning to take my bathing suit, just in case. 😐
  12. Ian_Grant
    Too-cool summer down there, too-warm winter up here. Outdoor skating and skiing haven't been memorable.
  13. Ian_Grant
    This article happened to come out today. Our GP is herself nearing retirement just as we enter our elder years. 😒 Have your politicians read this ..... https://nationalpost.com/health/canada-family-doctor-shortage
  14. Ian_Grant
    Michael, as you know I have this in my stash and know how tiny it is. Otherwise I might assume from the above pics that it is a 1/100 scale model. Looks fantastic! I noticed that the actual molds have fewer decorations at the bow than the box art; will you be casting more to add?
  15. Ian_Grant
    Grass is always greener across the fence. Our drugs are cheaper though.
  16. Ian_Grant
    Thank you Bill. It was a nice birthday as we were in Bonaire last week with lots of very nice seafood places. Had barracuda for the first time - it is delicious! Canada has "lifelong" publicly-funded i.e. socialist medical coverage although for years now they have been overwhelmed by aging population and wait times for common surgeries are very long; getting an MRI or even a referral appointment to a specialist can take months and months or even over a year. People go the States or even overseas now to bypass the wait at their own expense. Yet the gov't broadly refuses to allow "private" medical clinics; did you know your American system is held up as the "bogeyman" in Canada, a system Canada just cannot and must not emulate? Even if we cannot get the services as it is. On the plus side I now qualify for the "senior discount" at stores. 😊
  17. Ian_Grant
    Yes, but I have the galley and Preussen to finish first, and I'm also itching do to an RC square rigger at least ship-rigged but maybe even a four-poster barque like Neville Wade does. This despite just turning 65 last week....do I have the time before fingers and eyesight fail? I've been bitten by the RC bug again after decades away.
  18. Ian_Grant
    If I ever build my SR the waterline will touch the wale if I keep the whole hull "dry" on a stand, but this oddly-shaped hull begs for a sea display like you plan Bill in which case I agree with Henry and Mark.
  19. Ian_Grant
    Wow those windows are gorgeous!
  20. Ian_Grant
    Bill, I think your waterline's too low. Just IMHO.
  21. Ian_Grant
    Fantastic display again, Glen! Each build more amazing than the last .... you've inspired me to definitely do an on-water presentation for my next static build.
  22. Ian_Grant
    I went to the library to pick up a book on hold (one of Ian Ross's excellent "Twilight of Empire" series) and took a memory stick with the 3D file for stern medallions, in the event that the printers were available. They were so I whipped off the pair (33 minutes, 70 cents). One has a notch for the stern flagstaff to pass through, enabling the crew to lower the staff if required. Here they are with some primer on them. I had to use black PLA this time. And here in place: I've been applying primer to the ship too. Some parts are at two coats, some at one, all around the lower ports at zero. I can now see it's going to be quite a chore to mask and paint it all. Amazing how a little paint highlights the flaws. Some filling and sanding will be needed. Tomorrow we're off (at 4am 😭) to fly to Bonaire for a week of snorkelling/scuba/hiking. The boat will await my return.
  23. Ian_Grant
    "des res" ??
  24. Ian_Grant
    Nice! I have a 6" Newtonian as well, though not on a motorized mount which you need for photography. It delivers spectacular views of the moon, best viewed when it is partial and cratering is picked out by low-angle sunlight. But with a 6" you can also view Jupiter and four of its moons. I can make out that Jupiter is striped, but it's all "orangish-y" as the eye cannot integrate enough light to see different hues. Looking through an 8" Newtonian the striping is better defined and those four moons become very small orbs as opposed to points of light. Aperture envy is a thing. It's fun to view on successive evenings and see the moons move. When I first bought the scope, I wondered why the 6" protective "lid" had a smaller capped opening; it was only after an eye-watering session of moon viewing that I realized that one leaves the lid in place and removes the small cap to look at the moon with smaller aperture thus reduced light intensity. 😬
  25. Ian_Grant
    If you rent a car in Whitehorse now and propose to take it on the Dempster Highway, there is an extra charge. Presumably the highway is much better now than in 1978 but they say you **will** have a stone hit your windshield. In fact, when we did the pre-rental walk-around I pointed out a crack in the windshield; the guy just shrugged and said every car here has a cracked windshield LOL. Our neighbour drove across the country to the Yukon last summer, went along the Dempster, and sure enough a stone came from nowhere and cracked his Tacoma's windshield.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...